I showed you guys those L shape frame bits before - these are the elements for radiator cover or "cage" if you like
Front of the case will be occupied by huge dual radiator with two fans. Some, 20mm exactly, will be sticking out from the internal part of the case to the front cover. This front cover is pretty thick so there is more than 2cm of space between end of internal case and front wall. So some part of radiator will sit inside, some in the front part of the cover. I hope that makes sense...

Now, radiator and fans will be covered with a nice wall, made of those L shape bits, narrow aluminium wall on the left and nice mesh inside the case.

Here are the main bits:




This is two pieces put together, left wall of the radiator compartment.
Don't worry those bits are uneven on top, they will be cut to size later on.



But first, I want to show you mounted acrylic "spine" for drive cage
Yep, I finally mounted it.

Here are main bits, two blue acrylic rods and two opal holders, top and bottom one.
As you can see, one on the left is bottom one, will be screwed to the bottom of the case. Top one, on the right, has already installed brass inserts on the side, cause this one will be screwed to the side panel of the case, internal one, which I cut to size and mounted on the right from mobo tray.




Now, these two will be pushed on those rods and will end up in the middle. They will be reservoir holders mounts.




Small adjustment to the case top rail Rods were pretty long




..and rods installed. I let myself to play with different color program son my camera








Oh, this is a part of next update, cause it's not finished, but I will show it anyway
Here you can see brass inserts already installed in acrylic rods. These are the first pair, which will hold first drive cage shelf. I tested it and it look awesome, but need to finish all the way up before show it

Kinda small teaser



OK, let's get back to radiator compartment.
Here is a small L shape holder for a left wall...




..and here you can see drilled and ready to be screwed right side L shape bracket, right next to mounted rods "spine"...



..and the left wall "pushed in". I will use rivets to mount them, so for now they are only pushed, to show the idea. Between those brackets I will install nice mesh and glue it to the frame with double sided tape, to make it look flash. I have some nice mesh left after Nano Tower project, when I got it from Bill, from MNPCTECH.




Three last photos show the middle acrylic reservoir holders mounts pushed down.
Holes are perfect so it was pushed down pretty hard, so they won't slide.
Of course they will be drilled and brass inserted, to make sure my beautiful EK reservoir won't move.







OK, that is all for now. I hope you like this update and will patiently wait for another
Looks like next Monday is a holiday, so will be taking day off to stay with my daughter at home. This may create good opportunity to go out and do some more work on Aurora.

So, please stay tuned! :thumb: