ASUS Maximus V Forumla/Extreme Official Support Thread

[Trice]

How come with 0704 BIOS when I set my voltage to 1.3 for CPU and 1.65 for DRAM it doesnt change them unless I manually do so in Windows? Should I go to the latest BIOS to fix this?

[andressergio]

I just installed the latest bios from asus 1604, i like the new feature, it allow me to select the OC 4.2 - 4.6 or 4.8 and all other setting adjust automatic.
I just select 4.2Ghz save and exit, and no problem at all

guess Asus spotted that Asrock did that long time ago with the Z77 Xtreme not always good toys are good for stability...0095 its a rock solid BIOS

[andressergio]

A bit too much, too easy, no ?
One click and ** baamm ** oc to 4.8
Is there similar option in bios 0095, andressergio ?

u can OC to 4.6 same baam but as i told you any new BIOS for me introduces some things i dont like so i prefeer to go 0095 for my rock solid 5GHz HT 2800Mem so my SLI of GTX680 pumping fire at 1320core
i tried every BIOS of M5F i stood with that

but if you are new to OC and you want easy go for that AUTO OC 4.8 that will be good either way

cheers !
Sergio

[andressergio]

How come with 0704 BIOS when I set my voltage to 1.3 for CPU and 1.65 for DRAM it doesnt change them unless I manually do so in Windows? Should I go to the latest BIOS to fix this?

0095 dont do that mate neither latest bios try and report back

Cheers !
Sergio

[DjLeco]

u can OC to 4.6 same baam but as i told you any new BIOS for me introduces some things i dont like so i prefeer to go 0095 for my rock solid 5GHz HT 2800Mem so my SLI of GTX680 pumping fire at 1320core
i tried every BIOS of M5F i stood with that

but if you are new to OC and you want easy go for that AUTO OC 4.8 that will be good either way

cheers !
Sergio

Hi Sergio, I use 0095 bios on mine Maximus V Formula, but I don't see option for booting into optical device (pressing F8 or in bios), on AHCI mode.

Putting bios 1.4 or 1.6, the option reapear.

At you is the same?

Optical device (DVDRW) is put on Intel Controller, on S-Ata 2 port.

[andressergio]

Hi Sergio, I use 0095 bios on mine Maximus V Formula, but I don't see option for booting into optical device (pressing F8 or in bios), on AHCI mode.

Putting bios 1.4 or 1.6, the option reapear.

At you is the same?

Optical device (DVDRW) is put on Intel Controller, on S-Ata 2 port.

Weird i can boot perfect from all media

can you go to devices on BIOS and re check ??? the BIOS should see it so you can boot from it

i can also boot with an USB one

Good luck
Sergio

[cadaveca]

Hi Sergio, I use 0095 bios on mine Maximus V Formula, but I don't see option for booting into optical device (pressing F8 or in bios), on AHCI mode.

Putting bios 1.4 or 1.6, the option reapear.

At you is the same?

Optical device (DVDRW) is put on Intel Controller, on S-Ata 2 port.

Try non-Intel port.

[subzero 1979]

@raja ihave a problem my mobo stucks at 4f and reboots after 4 f and reboot
you can help me?
FIXED

[subzero 1979]

strange when i flas 0095 bck cant be changed mei no works why?/??//

[noobzed]

little off topic, but not by far

what are the ic ?

CMT8GX3M2B2133C9 rev4.13 ( double sided modules on each stick )

- Two matched 4GB modules for use in high performance Intel Core i7, i5, and i3 dual channel processors
- Outrageously fast 2133MHz performance using 4GB of memory
- Ultra-low 9-11-10-27 latency
- Intel XMP (Extreme Memory Profile) Support
- Airflow Fan
- Density: 8GB (2x4GB Module)
- Speed: 2133MHz
- Timing: 9-11-10-27
- Type: DDR3
- Format: DIMM
- Pin Out: 240
- Pin Voltage: 1.50V

http://www.memorybenchmark.net/ram.p...C9+4GB&id=1437

[hersounds]

IC is the manufacturer of ram chip like Hynix,Elpida,Samsung,etc

some chips are better to OC, another are better to tight settings, some ones loves scaling with vcore ...

[noobzed]

found my answer on the internet : Samsung ic

http://kikicoco1334.blogspot.fr/2012...rformance.html

[subzero 1979]

mobo now stucked at code 78 tried another memoery vga reseat cpu but same issue another one rma in one week
i will go to buy another brand mobo

[andressergio]

mobo now stucked at code 78 tried another memoery vga reseat cpu but same issue another one rma in one week
i will go to buy another brand mobo

are u using ROG Connect to flash ? i saw there was a method to revive not sure if was that code but worth a try it was on this web or maybe you can ask shamino there

http://kingpincooling.com/forum/forumdisplay.php?f=23

[subzero 1979]

are u using ROG Connect to flash ? i saw there was a method to revive not sure if was that code but worth a try it was on this web or maybe you can ask shamino there

http://kingpincooling.com/forum/forumdisplay.php?f=23

m5f.cap download link please for mei reflash

[noobzed]

m5f.cap download link please for mei reflash

+1

[subzero 1979]

cpu dead at stock settingd

[andressergio]

cpu dead at stock settingd

i bet you have bent pins on the socket, take a good picture of it and post here please

[subzero 1979]

checked with microscope and tested another cpu (crappy pentium) and boots fine
test cpu on another mobo and same issue 78 error code,cpu is dead R.I.P

[andressergio]

checked with microscope and tested another cpu (crappy pentium) and boots fine
test cpu on another mobo and same issue 78 error code,cpu is dead R.I.P

Damn sorry to hear mate

[subzero 1979]

6200 3d on cascade -120

[zanzabar]

has any1 found a way to make AC3 play with the optical in on the extreme?

[Ramguy]

M5 1707 bioses. GeneV, Formula, Extreme included. Multiplier issue fixed, Fsb 100.00Mhz fixed, and other things......Thanks Shamino


http://www.mediafire.com/?28rhmf7drn7zutk

[hersounds]

1707 installed...all fixed thanks

[cadaveca]

M5 1707 bioses. GeneV, Formula, Extreme included. Multiplier issue fixed, Fsb 100.00Mhz fixed, and other things......Thanks Shamino


http://www.mediafire.com/?28rhmf7drn7zutk

Sadly, he's still got lots of work left, every single ASUS Z77 board needs this fix, ROG and non-ROG. More and more users come on our forum now complaining about it.

But I knew Sham would get it fixed, and because of that, he's one of the most important people in the industry right now. I hope they pay him very very well.