New Crucial 1.5V DDR3 Kits

[Reefa_Madness]

but it took a crapload of voltage.

Micron and voltage. Who would have thought???

[Ivanlabrie]

I like what I see...Seems like 4gb modern Hyper sticks xD
Should be fun for 3d benching. :p

[Shiranui Gen-An]

LN? mode+Extreme OV enabled for >1.92v didn't do much to help unfortunately. I was hoping for 2x4GB 32M stability at 2400 C8 or C9.

Sent from my Nexus 7 using Tapatalk 2

[xdan]

1866CL9 kits are much better and some kits are better than other. You could buy 3-4kits until you found a very good one.
I will post soon some results on AMD.

[XBrytanX]

https://www.dropbox.com/s/5cmzzcrzo4...20take%202.jpg



Uploaded with ImageShack.us

[Shiranui Gen-An]

More Crucial mismatched ICs!!



This is from a kit of 2x8GB Ballistix Elite 1866C9 I picked up locally. There are D9PQL and D9QLR chips on the same module.

These sticks seem to have a hard VDIMM wall at 1.72v. Higher than that and they don't even want to boot.

[Shiranui Gen-An]

https://www.dropbox.com/s/5cmzzcrzo4...20take%202.jpg



Uploaded with ImageShack.us

Good grief is there that much difference between the 1600C8 and the 1866C9?! Or are yours a different IC from D9PFJ??

[Shiranui Gen-An]

Has Crucial switched to Samsung ICs, or have the Micron low power chips gone OVER 9000?!?! http://www.thinkcomputers.org/crucia...-kit-review/3/

Revisited this post since I didn't believe they were Micron at the time; looking at the stickers on the modules, the part numbers end in 16FMR so they were indeed D9PFJ.

[Alex-Ro]

Yeap,they can do 2400 11-11-11 easy but i doubt it's memtest stable,however i validated 2600 10-10-10,only validation tough

[Asmola]

I buyd 2x2GB kit of these for 15€ and these does 2400MHz 9-9-9-27 from the first boot. More testing to come..

[XBrytanX]

@Shiranui Gen-An this are 4Gb D9PSH & D9QMS double sided Tracer's (same sticks i posted earlier in this thread -one was BAD -will get replacement so i'l have another set )

[Shiranui Gen-An]

Grabbed the last two of these from a local Fry's Electronics.



Sent from my Nexus 4 using Tapatalk 2

[Reefa_Madness]

How much are these going for at Fry's now?

NM...looked it up. Online pricing says $55, but only available at local B&M.

http://www.frys.com/product/7147542;...H:MAIN_RSLT_PG

Sometime last summer they had these for $40, plus $4 S/H. That was a heck of a good grab back then.

[XBrytanX]

1x inbound
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

are this the same ,SN # is a bit different ?
BLT2CP4G3D1869DT1TX0

[Reefa_Madness]

1x inbound
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

are this the same ,SN # is a bit different ?
BLT2CP4G3D1869DT1TX0

They should be the same, only difference is that your are a dual kit and his are two individual modules...look closer at his packaging and you'll see that there are two of them.

His model number is for a single module.

Here you go...from the Egg.

Crucial Ballistix 4GB 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model BLT4G3D1869DT1TX0

http://www.newegg.com/Product/Produc...82E16820148557

[XBrytanX]

if this suck it will be the last Crucial set i bought in a long time ,the marking/SN# are just to much for me ..i recently purchased this set
http://www.ebay.com/itm/130489528667...84.m1497.l2649

and it was bad move ..

[Shiranui Gen-An]

Well at least I can get two sticks to pass Super Pi 1M at 2400 9-9-9. Still not impressed that with this much voltage I can't pass 32M.

[Alex-Ro]

BUMP VTTDDR to 0.9,you will be surprised

[XBrytanX]

Well at least I can get two sticks to pass Super Pi 1M at 2400 9-9-9. Still not impressed that with this much voltage I can't pass 32M.

tWRDR 4 was the magic number ,i was able to leave all the other tertiary tight ,try it (1.66v) LB 5

[xdan]

XBrytanX, you have D9QMS and he has D9PFJ...

[XBrytanX]

they both 4gb sticks ,it wouldn't hurt trying

[Asmola]

This is new Crucial Ballistix 1866 CL9 2x2GB 1.5v (BLE2G3D1869DE1TX0CEU 16FMR). Measured voltage 1.66v (1.65v from bios).
Pretty good for 15€ (7,5€/unit, buyd them seperately).

[XBrytanX]

tWRDR 4

[Calathea]

This is new Crucial Ballistix 1866 CL9 2x2GB 1.5v (BLE2G3D1869DE1TX0CEU 16FMR). Measured voltage 1.66v (1.65v from bios).
Pretty good for 15€ (7,5€/unit, buyd them seperately).

*snip*

Single or double side? Nice clocks.

[Don_Dan]

Single or double side? Nice clocks.

All the new 2GB sticks are single-sided, since he has a 16FMR kit those should be D9PFJ.