Gskill TridentX F3-2800C11Q-16GTXD

[andressergio]

And another one at 5GHz with trident X 1.85 profile.



Here is the box.

great mate

do they pass hyperpi ?

[andressergio]

this is just a try i copied mostly all your settings except CL11 and 96 zpaf

and look my 2666CL10 they did awesome, i also have yours



Uploaded with ImageShack.us




Great kit also see the lit diff and the BIG on volts this is my 24/7

[zpaf]

great mate

do they pass hyperpi ?

Thanks.

Yes they pass hyperpi.
I can post at 2666MHz with Trident X profile with 1.77v and later I will try hyperpi at these settings.

[andressergio]

Thanks.

Yes they pass hyperpi.
I can post at 2666MHz with Trident X profile with 1.77v and later I will try hyperpi at these settings.

very nice !!!

[owikh84]

Can anyone pass HyperPi with this kit at 2800 11-13-13?
My kit is 2X4GB can pass SuperPi at the rated specs, 1.65v vdimm, 0.925v VCCSA, 1.15v VCCIO
But failed on HyperPi

[Dumo]

Can anyone pass HyperPi with this kit at 2800 11-13-13?
(

HyperPi with all 4C/8T stressed cpu more. Try up vccsa to xmp default

[andressergio]

Can anyone pass HyperPi with this kit at 2800 11-13-13?
My kit is 2X4GB can pass SuperPi at the rated specs, 1.65v vdimm, 0.925v VCCSA, 1.15v VCCIO
But failed on HyperPi

true but i can pass it stock at 4800 for 5GHz i need a bit more

some screens for you as reference

all are on Lateny boundary 6





hope you get them there owi good luck

[hiwa]

Can anyone pass HyperPi with this kit at 2800 11-13-13?
My kit is 2X4GB can pass SuperPi at the rated specs, 1.65v vdimm, 0.925v VCCSA, 1.15v VCCIO
But failed on HyperPi

Its imc failed , try higher vccsa

Andre u got a great cpu, not easy find one can do 2800 memtest stable.

[andressergio]

Its imc failed , try higher vccsa

Andre u got a great cpu, not easy find one can do 2800 memtest stable.

Thanks bud !

[owikh84]

Thank you guys... first attempt load XMP #1
2800 11-13-13-35-2T
vdimm 1.65v
VCCSA 1.2v
VCCIO 1.15v



Somehow 2T seems to be impossible I have tried up till
vdimm 1.8v
VCCSA 1.25v
VCCIO 1.25v
But failed HyperPi within 2 loops.

[Leeghoofd]

I can pass hyperpi 32M 2T, yet fail within sec son prime95 blend... daily running 2800MHz are not for most IMC...

[owikh84]

I can pass hyperpi 32M 2T, yet fail within sec son prime95 blend... daily running 2800MHz are not for most IMC...

I have the same thought.
Apparently need to run some real stress tests like custom blend Prime95 & LinX/IBT AVX to confirm stability for 24/7.
HyperPi and memtest are only the first step.

[andressergio]

i think there?s nothing more painfull to the IMC and MEM than runing 500%+ of memtest

[owikh84]

Finally managed to pass HyperPi with G.Skill Trident 2800C11 kit at

2800 11-13-13-35-1T
vdimm 1.775v
VCCSA 1.2v
VCCIO 1.15v
subtimings as per andressergio's settings

[Alex-Ro]

What chips,hynix bfr or cfr?

[owikh84]

What chips,hynix bfr or cfr?

I didn't remove the heatspreader but afaik BFR only existed on RipjawsZ series.
Then, TridentX Hynix kits should have CFR or MFR only.

[websmile]

MFR are 4gbit ICs, if your TridentX aren?t single sided sticks, these will sure be CFR then as these are 2gbit ics = 16 ics, ics on both sides of pcb

[Alex-Ro]

Im asking because i tought cfr would not need so Much voltage,my 2800 platinums can do 11-13-12 with 1.69 ....

[owikh84]

Im asking because i tought cfr would not need so Much voltage,my 2800 platinums can do 11-13-12 with 1.69 ....

1.69v for SuperPi or HyperPi 32m?
My TridentX 2800C11 just needs 1.65v for SuperPi, but sucks 1.775v on HyperPi

[andressergio]

mines are hynix they pass hyper at 1,65 as shown above even on VCCSA and VCCIO stock

[owikh84]

mines are hynix they pass hyper at 1,65 as shown above even on VCCSA and VCCIO stock

Either i got a bad kit or weak IMC. Hopefully it's not a skill problem LOL.

[andressergio]

Either i got a bad kit or weak IMC. Hopefully it's not a skill problem LOL.

it aint skills problem owi its what u say some time ago i got 1 kit of Gskill 2666CL10 and sucked and second kit was total dif story

[owikh84]

LinX successful @ 2800 11-14-14-25-1T @ 1.66v

[andressergio]

LinX successful @ 2800 11-14-14-25-1T @ 1.66v

on the M5F the run same CPU at 2800 11.13.13..1,65v why cant do the same on the M5E...makes me mad

[owikh84]

on the M5F the run same CPU at 2800 11.13.13..1,65v why cant do the same on the M5E...makes me mad

11-13-13 wont pass LinX with whatever voltages I put.