cinebench 11.5

[FlanK3r]

Stilt, we have very simillary results for motherboards

[I.nfraR.ed]

First try. This mobo has a huge vdroop and it's very hard to use the 1:12 mem divider, too.
vcore is set to 1.6V in bios, resulting 1.52V in idle and 1.44V in load.
Waiting for CH5F-Z, but there's no sign when it will be available in Bulgaria
Hopefully it will be this year...

[demonkevy666]

First try. This mobo has a huge vdroop and it's very hard to use the 1:12 mem divider, too.
vcore is set to 1.6V in bios, resulting 1.52V in idle and 1.44V in load.
Waiting for CH5F-Z, but there's no sign when it will be available in Bulgaria
Hopefully it will be this year...

still not as bad this UD7 Rev1.0 I got 1.7 in bios = 1.56 on load.

[Barr3l Rid3r]

[Barr3l Rid3r]

A bit better

[Barr3l Rid3r]

[FlanK3r]

wooow, 9.13! Awesome, your batch of CPU?

[Smalltimer]

Impressive!
Is this a stable overclock?

[bro20000]

Little test 5.1 1.475vcore
CB11.5 and fritz chess

[I.nfraR.ed]

Managed to find time to install the water cooling on the 24/7 system and made a quick test.
The score is on the weak side, but still a good frequency without throttling of the board.
The key here probably is the full-cover block on the Crosshair IV Formula.

5.31GHz at 1.56V and normal ambient temp is decent, I think.

[FlanK3r]

very nice Infra , looks I need some improve with my FX . Is chance with allinone watter beating some custom watter?

[Lightman]

Very nice scores coming after Vishera debut!
It seems new models are clocking slightly better than old ones which is nice considering AMD is stuck with 32nm for now.

Keep pushing guys! I love this competition!

[Tomasis]

impressive, barrel and infra!

[Smalltimer]

Dammit, now I'm really wanting one of these :p

[eagle101]

Managed to find time to install the water cooling on the 24/7 system and made a quick test.
The score is on the weak side, but still a good frequency without throttling of the board.
The key here probably is the full-cover block on the Crosshair IV Formula.

5.31GHz at 1.56V and normal ambient temp is decent, I think.

I see those are 3029 bios with the fx 8350 on your CH4 Formulas board, how did you flash your bios from your 1090T to your 8350.....whats the steps i wana do this too, with my 8350
Thank You

[CrimInalA]

Probably just flash 3029 with 1090T , shut down . clear cmos . swap cpu . boot up .

[macci]

Latest score - from the AMD OC Challenge in Tokyo:

[G.Foyle]

Very nice, numero uno
Is that the balance of heat, voltage and speed, or do you think you could tweak it a bit further?

[FlanK3r]

Nice one Macci! The best, what I and froxic can save with core 0/1 was this. We got over 8000 MHz with core 2+3 (something about 8040-8050), but we have only photo...

Attachment 0
http://valid.canardpc.com/show_oc.php?id=2610620

[ReKcOlNu]

Nice one macci!, He or LN2?

BTW, for those interested, I added a "FX's Only" score chart to Post #1 here (CB 11.5 score charts).

[Dr_Swizz]

Result from some rather quick testing with new hardware in cold winter air:

[FlanK3r]

awesome man, what temperatures?

[Dr_Swizz]

awesome man, what temperatures?

About -17C ambient temperature. :-)
The BIOS showed -11C for the CPU at 5GHz, but I really don't trust the temperature reading very much.

[FlanK3r]

lol, you must be frozed with -17C in room :-D

[Daveburt714]

Damn you Dr Swizz.... (Awesome score BTW! )

I've been falling behind in the Cinebench list, so I decided to push my newest chip to see what it would do...
This is my best score so far, but it still pales in comparison to yours!

My only saving grace may be the fact that this was done with an 8320...


I was using H2O with winter air to get this score too...