XS HWBot Team

[Splave]

Thanks guys, I am going to refill today and try one more time before the Asrock gets here, next stop for 01, 150k, and sub 5 for 32M. You have no idea how pissed I was when I saw that time.

So where exactly is LOD values in NVInspector?

Similar area to where the predx9 tweak is? or under the show overclocking options?

I am on version 1.9.6.6 which is I guess the newest one.

I forget if they call it LOD or level of detail in nvinspect, but its in the advanced settings yes where dx9 compatibility bits shizz is.

[l0ud_sil3nc3]

01 is looking much better now.
I thought you could change LOD with NV Inspector?

What did you do to that 03 run?!

As for 03, maybe unstable cpu/gpu at those clocks?

gpu was +150mV memory was +100mV, going to have to try the less is more approach on that one, because that score is .

[l0ud_sil3nc3]

I forget if they call it LOD or level of detail in nvinspect, but its in the advanced settings yes where dx9 compatibility bits shizz is.

So that's where I set the limit for each test in between runs correct? 5 & 15 for the rest huh

Also best run order for me was N then everything else default, though Vivi's was close.

[l0ud_sil3nc3]

here is a dl link for a modded NV Inspector with extended LOD values

http://www.mediafire.com/?iai5vvdzsca21j0

v 1.9.4.x

[Splave]

So that's where I set the limit for each test in between runs correct? 5 & 15 for the rest huh

Also best run order for me was N then everything else default, though Vivi's was close.

yep same here

[Don_Dan]

As for 03, maybe unstable cpu/gpu at those clocks?

Yeah, since all the subtests are slow this is very likely.

So that's where I set the limit for each test in between runs correct? 5 & 15 for the rest huh

Also best run order for me was N then everything else default, though Vivi's was close.

You didn't rerun CL?

[l0ud_sil3nc3]

Yeah, since all the subtests are slow this is very likely.



You didn't rerun CL?

Nope I will tonight I just filled back up.

[BeepBeep2]

Hope things are going well for everyone, I have taken a step back for a bit due to health, time and money concerns...
Hope to be back soon, dewar is all sad and empty.

Still have LS's CPUs here too, ready to ship but currently too broke to ship stuff. Was wanting to try out cores on the 8150 on LN2 before sending it back.

Dead MIVE/2600K still here too...set up RMA with ASUS and can't pay for USPS Priority Mail, lol...

[l0ud_sil3nc3]

almost there

[ZenEffect]

one more push and i think you got it

[Don_Dan]

Hope things are going well for everyone, I have taken a step back for a bit due to health, time and money concerns...
Hope to be back soon, dewar is all sad and empty.

I'm fine, but still busy with one last exam.

almost there

Not bad!

[ZenEffect]

George, we need to get together for a bench session. we could do some real 01 damage between the 580's we have + chips + board selection + ram. I think we might be good to go for a top 20 spot.

[l0ud_sil3nc3]

George, we need to get together for a bench session. we could do some real 01 damage between the 580's we have + chips + board selection + ram. I think we might be good to go for a top 20 spot.

Dude yes come up this weekend, you know I am stuck here until

[Dumo]

^^If I'm local cali, I'll definitely join in

Too bad my local bench buddies not actively benching nowadays

[ZenEffect]

^^If I'm local cali, I'll definitely join in

Too bad my local bench buddies not actively benching nowadays

Im sure if you hit up TA he would be down to bench.

[l0ud_sil3nc3]

^^If I'm local cali, I'll definitely join in

Too bad my local bench buddies not actively benching nowadays

Hey if you ever make it to the North part of the state hit me up

Massive bench session to ensue

[Dumo]

@Zen...Just have to syncronize time off work with TA, Msimax and Chew seem to be inactive.

@L0ud... Will do

Bway, doing some 5Ghz 3D'01 runs. Sub-tests could be better

Lets do a thread here @ 3D section. Its fun

[Splave]

loving the 01 benching men back to basics

[BeepBeep2]

@Zen...Just have to syncronize time off work with TA, Msimax and Chew seem to be inactive.

@L0ud... Will do

Bway, doing some 5Ghz 3D'01 runs. Sub-tests could be better

Lets do a thread here @ 3D section. Its fun

Noice

[l0ud_sil3nc3]

had a pretty good session with a bad mount





#2 not so bad I guess, however I am wondering how to change LOD between subtests on ATI? I used ati tray tools to change it but it freezes and a reboot is needed and then the LOD value you entered is set, which in the above case was 5 for all sub tests.

[trans am]

Im sure if you hit up TA he would be down to bench.

Exactly. The problem with Dumo is he manages a restaurant so he is working during the weekends and I work 9-5 mon-Fri. Benching is the easy part. Getting the same days off so we can bench is the hardest part.

Btw, nice 3d mark runs guys! I always wanted to learn how to do that one properly.

[ZenEffect]

I will debug the LOD issue tonight with a 7970 and let you know whats what but i remember using atitool to change lod values (not ati tray tools.)

[l0ud_sil3nc3]

I will debug the LOD issue tonight with a 7970 and let you know whats what but i remember using atitool to change lod values (not ati tray tools.)

I am going to test SetLOD as that's what was recommended, I found a copy from elmor to use, let me know if that is the best option.

[ZenEffect]

I never got it to work tbh.

[l0ud_sil3nc3]

I never got it to work tbh.

setlod or ati tray tools?