Results 1 to 25 of 909

Thread: Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

Threaded View

  1. #10
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,421
    Very nice Shiranui! 1.72V is quite a bit, did you measure voltage with a DMM? 1.70V set in bios on my board is ~1.72V measured by DMM. Why is your Aida bandwidth so low? Low CPU frequency perhaps?

    Today my second kit came in from RamExperts, together with a €22,20 invoice from my friends at the customs. (about $25).

    Oh well. These are week 19, lets hope they shine.

    My 1215 kit can boot into Windows at 2600 10-12-12-28 1t but it errors out in the very first loop of Spi 32M. I have tried up to 1.69V with AI Suite, i get code 55 if i try to boot with anything over 1.68V in bios so i had to raise Vdimm in Windows.

    2400 9-11-11 is absolutely no go, it won't even make it into Windows but maybe it just needs moar volts, dunno.

    This 1219 kit is the first kit i´ve seen with the chips made in the very same week as the sticks itself. Most sticks use chips that are between 1 to 3 weeks older than the production week of the sticks. My 1215 kit has week 13 chips.

    The production week of the chips is in the first line: SEC xxx HYK0. The xxx mark the week number.
    Last edited by Zeus; 07-24-2012 at 12:18 AM.
    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •