SuperPi32m 5Ghz Ivy All Out Challenge!

[I.nfraR.ed]

Calathea, did you try pll ov enabled?

I'll test but not sure that setting is present on Z77X-UD3H.

Yep, that was the key for my chip to post above 2400 divider.
vccsa and vccio did nothing.

[Splave]

i'm in 18 territory too))
GUN'G'STAR - 6:18:829 - 50x100 - 1400 - 10-12-12-21-112-1 - M5G - sams - 1,87 - all on air

Insane all on air!

[gungstar]

Splave
thanx, can you share Timings#2 for your last airsanity run? )

Raja
how you mount cascade on memory? any pics of it?

[Raja@ASUS]

Splave
thanx, can you share Timings#2 for your last airsanity run? )


Raja
how you mount cascade on memory? any pics of it?

Use the Corsair Tec cooler cold plate. Remove heatspreaders from Corsair Dominator GT and use on your modules. Mount cascade evap head to cold plate with cable ties.

[Splave]

I will check for you today

[M.Beier]

M.Beier - 6:22:328 - 48*104.1 - 1250mhz - 8-11-9-27-101 1T - ASRock Z77 Extreme6 - Corsair Dom GTX3 PSC - 1.83v - WC on CPU, 120mm on ram.

Still not done, dont bother installing AIDA yet, so, sue me !!!


Time to optimize CW, maxmem and timings / ram freq....


... wondering if honda will neglect me again :'(
Got a feelin' that taking a 'round trip' will help me a bit with the last...

[maxxx]

@splave: I second the motion for gunstar's request. TIA....

[Splave]

Sure no problem, I am trying for better tomorrow I do not change Timings #2 but will show a screenshot

[M.Beier]

Calathea - 6:22:594 - 50x100 - 1200.5MHz - 8-10-7-25-80-1 - Gigabyte UD3H - G.Skill 2133mhz C8 2x2gb/BBSE - 1.82v - stock air

Way too slow but can't post above 1210 Mhz

increase your precharge, should solve it.

[M.Beier]

waza is still a challenge for me on this platform,

one thing i have noted though, as your memory timings get tighter and tighter, waza becomes more consistent,

for me when testing waza with "loose" memory secondaries my waza can swing around a bit, but when i tighten up those secondaries it becomes more consistent,

i think 2-3 seconds is a fair estimate, but it also depends on your OS, so does waza size, copy techniques, wait times, etc

3.1-3.3s here.

[gungstar]

M.Beier
maxmem, waza size, wait time?

[M.Beier]

M.Beier
maxmem, waza size, wait time?

I am still using n00b CW = too lazy to clean up laptop making the space to create my CW files...
But here are my settings;

MAXMEM; 664 (dont remember how I got there^^)
Using 16KB files in OCX, CDT, C->D

When I do CW myself, I usually use 1024KB files = 1MB, and start by 700 files, then delete files untill I reach the sweetspot for moving D-C-D, I bet I still got a 0.3s gain left... But got worse hurdles to pass before focusing on final improvements...

The mobo / CPU is honestly killing me, I cannot get 1300mhz, no matter how hard I stamp in the ground and keep shouting at the PC "I KNOW MASSMAN, YOU LISTEN YOU!!"

EDIT: And wait time from D->C->D no wait time, but then 7-10 sec untill system is in balance, before I start 32M.

[hicookie]

HiCookie - 6:17.937 - 46x108.74 - 1305MHz - 6-10-8-19-68-1T 2.1v - GIGABYTE Z77X-UP5 TH-CF- 2x2GB 2000 C6 GSKILL F3-16000CL6T-6GBPIS- 2.1V- CPU H100/DDR LN2

Bandwidth


Super PI

[gungstar]

I am still using n00b CW = too lazy to clean up laptop making the space to create my CW files...
But here are my settings;

MAXMEM; 664 (dont remember how I got there^^)
Using 16KB files in OCX, CDT, C->D

so 700Mb waza?

...system is in balance...

you mean when availiable and cache became nearest?

[M.Beier]

so 700Mb waza?

you mean when availiable and cache became nearest?

Actually I saw 572MB waza last time I opened OCX tweaker, but, when I do manual, I start with 700MB, then delete....
After 7-10 seconds it settle... So, if cache and avail is not near equal, I delete or add a little, calibrating it... I keep doing this untill I am happy with the result = when I cannot improve it anymore.

[M.Beier]

Oh and there is no such thing as stupid questions, only stupid people, so, here is a concern of mine, which thread do you guys use in windows?

I always pick #2, because I have this doubt...
4c/8t.... Which are the hyperthreadings??
A) 0+2+4+6 = C, 1+3+5+7 = HT
B) 0+1+2+3 = C, 4+5+6+7 = HT

Which is the right one?? A or B?? However 0 and 2 is in both, and since 0 is being used on OS, the choice has been obvious for me.... But, any windows experts out there? Youngpro, any word?

[Calathea]

Or you do just disable HT and run on your strongest/coolest core :P

[hicookie]

I just ordered some Teams so i will join this game soon!

anyone tried these yet?

Vivi,

I just received the Corsair's 2666C10, It peforms very impressive air cooling, 1.88v 2774 C9
If we talk the 2666 module and samsung ICes, Corsair now bulit the most powerful modules and stylish !

[Hondacity]

welcome aboard boss hicookie!

-update after summer party(tonight)

[M.Beier]

welcome aboard boss hicookie!

-update after summer party(tonight)

Buuuurn Honda BUUUURN, not welcoming me, and you MUST have spotted it this time!!!

EDIT: Before Honda wakes up...
M.Beier - 6:20:938 - 48*104.1 - 1250mhz - 8-11-8-27-78 1T - ASRock Z77 Extreme6 - Corsair Dom GTX3 PSC - 1.83v - WC on CPU, 120mm on ram.
Maybe I should find my T30 TEC cooler and mount it on the ram.... But strongly doubt its enough for 6-11-8-27.

[dinos22]

powerful and stylish

[gungstar]

hicookie
can you share spd of corsairs?

[Splave]

BBSE on ln2 today, hoping for high 6.17's

[sin0822]

nice job cookie!!!!!

[M.Beier]

nice job cookie!!!!!

Dude, you got one of his highly binned IMC CPUs, why not enter the competition?
g0g0g0, you got DDR3-3000+ capable chip, what are you waiting for!

powerful and stylish

Thanks Dino