i7 3770K intel TIM | AS5 | MX4 | PK1 | LQP | IX

[amlett]

Hi,

^^^^^ what he said

Great bit of work & very good results

I too would like to know if you tried Liquid Pro on both the bare core & the IHS?

I also note your GFLOP's are very low..... were you using a non AVX operating system an old linpack binary or was this because your chip would only run single channel?

I didn't use the AVX version of linx beacuse I didn't know of it at the time I started the review. The low GFLOPs of the indigo xtreme acptures is because the CPU was bad seated and I only cloud use Single channel (if I used dual, q-code 55 at the mobo led). After reseat the CPU with other TIMS, I could use dual channel again. See the PK1 results.

I used linx beacuse it gave me 1 more degree than prime 95 27.7 with AVX and FFT.

Today I'll update the spanish review with some test using linx with AVX.


That "soldering" possibility is why I didn't use the liquid pro both the IHS-H100 and die-H100. Not sure about how can cure liquid pro, and too lazy for removing the mounting braket of the mobo, at least now.