***ASUS Rampage IV Extreme Owners Thread***

[OC Nub]

I don't really understand what to do here? He just says to click the BIOS switch button to start from BIOS2 instead of BIOS1 and everything should be okay?
I've been trying both BIOS1 and BIOS2 and they both provide the same 01 Debug number without any boot. I tried to clear CMOS on both, I tried removing the battery without any luck.

I just tried the Asus BIOS Flashback feature by putting the 0018 BIOS onto a FAT32 format USB-drive, renaming the ROM file to R4E.ROM and inserted it into the white USB 2.0 port on the back and kept pushing the BIOS Flashback button for minutes after turning on the system without the BIOS LED's starting to blink one tiny bit which they should if the BIOS flashing process actually begins? It just sits there displaying 01 on the debug LCD.


After what I can gather most people seems to get debug error 00 and not 01 as I do, 01 is supposed to be "Power on. Reset type detection (soft/hard)." by the manual.

Someone correct me if Im wrong, but I believe he is saying shut down system, remove bios1 chip.

"It should go perfectly fine. I got a message saying IROG-1 was updating, so I guess Dumo was onto something. I reckon after BIOS2 is working well, you can just pop in BIOS1 again and flash it as well so you have two working bioses again."

"Flashed BIOS2 to 0018 bios (automatical update of IROG-1 again), shut down system, insert BIOS in BIOS1, copy BIOS2 to BIOS1 and now BIOS1 works again. Hope it will work for you guys too!"