XS HWBot Team

[BeepBeep2]

Haha, another ninja-edit. Those ProMOS are decent, but the 800HZ were only a mediocre bin, Crucial 5300 clocked equal most of the time. What voltage do they need for 500MHz CL4 and 600MHz CL5?

I've had them in the drawer since 2010, the ProMOS kit is from 2007...right when supply of D9 was dwindling. I bought the D9s second-hand.

I can't remember exactly what they need for 500 CL4 and 600 CL5, but it was quite a bit. I could barely do 800 3-3-3-5 @ 2.4v with them. The ProMOS kit doesn't touch CL3, but does 4-4-3-5 up close to 550.

[Hondacity]

Its just one of those days. Submissions don't work.

oh and HWB is slow today lol

[Don_Dan]

Yeah, that's a lot. The best D9 I've tested so far needs 2.13V for 400MHz 3-3-3-9, the best D9 I've ever seen on a forum needs less than 2.05V. My benching Anniversary Kit that has been used at 2.7V for quite a while needs 2.22V, but it hasn't degraded so far.
I still have some untested kits waiting to be binned, a 6400HZ kit is one of them.

@Hondacity: You broke it! :P

[ZenEffect]

nice benching on 4870 Rob!

looks like nature is the only thing holding you back in 01

[Hondacity]

Oi what did you do with 124k 3d01? I was benching @ 1120mhz on CL but only 1080 for nature. result was 120k lol. I got 122k just selected the 8. setLOD didn't help.

[ZenEffect]

skype?

I was also limited to dice on gpu as well... on a slim!

[BeepBeep2]

3D Benches not to run on Bulldozer under any type of cooling
3DMark01 - 06
I assume '03 will be bad, 05 and 06 are slower with HD 5770 @ 1025 and FX-8150 @ 5.2 GHz than HD 4850 @ 840 and Phenom II X4 @ 4 GHz.

I'm out of thermal paste, or I would swap to my 1100T for these benches...which should do 4.3-4.4 on water.

[Dumo]

I'm out of thermal paste, or I would swap to my 1100T for these benches...which should do 4.3-4.4 on water.

Tooth paste for emergency

[BeepBeep2]

Tooth paste for emergency

Hahaha no way, I'd rather run with a naked IHS XD

I realized I live (dangerously close) to IMOG, which gets his LN2 (from Airgas that quoted me 2.50?) while driving with the windows up(!) for .50/L somewhere in the area. I PM'ed him on HWBOT.

[Mafio]

as for FX IMCH scaling under cold with my CPUs i have a big gain going from air to SS but no gain from SS to LN2.
i had my best memory clocking results at phase and V-IMCH 1.8 +/- volt (then the CPU died).
at least contrary to what deneb/thuban did FX IMCH don't get worse when cold.

p.s. another bunch of socket 939 CPUs on the way

[BeepBeep2]

as for FX IMCH scaling under cold with my CPUs i have a big gain going from air to SS but no gain from SS to LN2.
i had my best memory clocking results at phase and V-IMCH 1.8 +/- volt (then the CPU died).
at least contrary to what deneb/thuban did FX IMCH don't get worse when cold.

p.s. another bunch of socket 939 CPUs on the way

Thanks!

I really had a struggle with Hypers and Thuban, even on dry ice when I was benching for OC.net competition. I could do 2000 6-6-6 for Sandra bandwidth on air with 1.9v but got stuck around 1850 when the CPU was on DICE.

[Don_Dan]

You gotta love it when you ask a seller "could you please tell me what's written in the last line on the IC, the code probably ends with A3G-something?" and the reply is "that's correct, the code ends with A3G-U."

[l0ud_sil3nc3]

Hahaha no way, I'd rather run with a naked IHS XD

I realized I live (dangerously close) to IMOG, which gets his LN2 (from Airgas that quoted me 2.50?) while driving with the windows up(!) for .50/L somewhere in the area. I PM'ed him on HWBOT.

just be sure to get a copy of the receipt posted over at oc forums.

[BeepBeep2]

just be sure to get a copy of the receipt posted over at oc forums.

Hmm, will do. Though I talked to him and apparently mentioning his name should be enough, considering he goes in multiple times a week and I'll probably be going to the same AirGas.

I might try to price match a closer location first.

[TheGoat Eater]

if they don't help at airgas with your own account - maybe he would fill yours on his account :S -

[BeepBeep2]

if they don't help at airgas with your own account - maybe he would fill yours on his account :S -

Haha, I'd be pretty mad if they didn't, considering I'll walk in with one of his receipts from the same location

He said he could get the location twice as close to me (20 min vs 50) to price match the .50/L but for some reason they wouldn't let him put the dewar in his car? He said he had to go back inside and get a refund O_o

[l0ud_sil3nc3]

congrats SteveRo for taking back the PCMark05 WR!

[Don_Dan]

Nice score SteveRo!

HWBox Hellas O/C Team is still in front of us though, we need some points!


This morning I scored 4x1GB BBSE value sticks on ebay for 10 bucks.

[Don_Dan]

Nice work Linuxfan!

[l0ud_sil3nc3]

very nice work Linuxfan!

[Hondacity]

Boomtastic!

[SteveRo]

Well done Daniel!!

[MTP04]

Good to see Daniel back in action!

[Mafio]

today i tried another 2 faildozer chips, both are crap

[l0ud_sil3nc3]

today i tried another 2 faildozer chips, both are crap

tried two llano chips and had a question Mafio, should I be able to max clocks on a single stage or do they scale with cold?

my ss runs about -50.

one things for sure they do clock memory very well.