anybody willing to order for me?
anybody willing to order for me?
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
@Punisher! - no problems with cold boot with my board. Disconnected the power for 15 min and then plugged back in and booted up just fine. The earlier versions of Asus P67 boards did have a cold boot problem but was fixed by a B3 bios revision and/or "enable wakeup from PCI-E" in the bios. Also turned it on first thing in the morning (it's winter time) in a cold office this morning and was just fine too. Did my 1st hour Prime95 first thing this morning (cold boot) and the second 2 hr Prime95 right after the disconnect.
@Alex Ro - well tried 1.5v and 1.55v - both BSOD'ed around 45 min on Prime95 blend.
However...here is 2 hours Prime95 blend @ 1.6v vdimm @ 9-10-10-28 1T DDR3 2133 at the same 4.8ghz 4C8T
http://i246.photobucket.com/albums/g...msungLV16v.jpg
They just got a dollar cheaper @ the Egg and I guess these are keepers!
Last edited by LagunaX; 01-24-2012 at 02:38 PM.
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
15min. off is not a cold boot. 8 houres off is a cold boot here .
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Well guys I have ordered 3x4g M378B5273DH0-CH9 . This are not the low profile version. I will update with the X58 platform results and see if they perform as good as with the x79 platform
real life
Cool. I am curious about P55 myself.
Dark Star IV i5 3570K | Asrock Z77 Extreme4 | 8GB Samsung 30nm | GTX 670 FTW 4GB + XSPC Razer 680 | 128GB Samsung 830 Apogee HD White | 140MM UT60/120MM UT45/120MM ST30 | XSPC D5 V2
i7 3770k - p8z77-v pro - 4x4gb - gtx680 - vertex 4 256gb - ax750
i5 3570k - z77-pro3 - 2x4gb - arc-1231ml - 12x2tb wdgp r6 - cx400
heatware
Already did 2 hours of Prime95 which I consider a better test than linX/LinPack for stability but that being said linX usually will pick up any errors in the first 5 runs:
http://i246.photobucket.com/albums/g...amsunglinX.jpg
IC's seemed fine but you'd be hard pressed to find a sized to fit sleeve heatspeader I think for these low profile kits - makes me think of the old Zalman blue ramsinks that came with their vga cooling kits!
Last edited by LagunaX; 01-24-2012 at 10:47 PM.
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
Samsung 2x 4GB 30nm Low Profile, Not bad
Prime95 Blend 8hrs @ 1960Mhz 9-9-9-27 1,47V
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Wow, so good, even if Blend tests only 1600MB, you should choose "Blend" and then "Custom" putting the right amount of RAM to be addressed (example: 7000MB). Click on my signature for the result.
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Nice results Barr3l Rid3r!
Computer: Intel i7-4770k | Asus Z87 Maximus VI Impact | 240GB Corsair Force GT | 240GB OCZ Vertex 3 | 16GB G.Skill Trident X 2400MHz | EVGA GTX690 Hydro Copper 4GB | Corsair AX850 | Steelseries 7G | Logitech G500 | 27" 2560x1440 Overlord Tempest X270OC 120Hz S-IPS
Cooling: Koolance 380i CPU block | Swiftech Hydro Copper GPU block | EK X3 150 Reservoir | EK X-TOP D5 PWM drive | PrimoChill PrimoFlex PRO LRT Bloodshed red | Alphacool NexXxos 240mm XT45 | Alphacool NexXxos 280mm UT60 | Bitspower Fittings | 4x Bitfenix Spectre Pro 120mm | 2x Bitfenix Spectre Pro 140mm | Lamptron FC-5V2
Case: Custom modded matte black Caselabs Mercury S3
I am sorry, you are totally wrong:
MEMORY TO USE (MB): 1600 so it uses 1600mb (first mistake)
Second mistake is that MEMORY TO USE has nothing to do with larger blocks size.
You should actually test as I have just told you for better test with respect to memory stability.
Blend, then custom and put 7000 instead of 1600.
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Happy to report these modules are working very well on the X58 platform for me. You can hardly see the ram when they're installed they are sooooo small. Modules are running 2Ghz 1.5V. at 10 11 10 31. Currently at work but will post screenshots tonight. Haven't had time to play around with timings yet as I just got them last night. More test coming tonight.
Gigabutt X58 OC F3 Bios
Xeon 5680 200x21@1.34V.Vtt 1.295V.
3x4 gigs Samsung 2Ghz 10,11,10,31@1.5V.
3xSapphire 5870
PCPC 950watt
Awww, suppose I'll be sticking to my 7-8-7 1900 mhz 2 gb sticks then. These are good compared to most 1600 mhz ram, but slower than decent 2 gb sticks on X58.
Ok PiLsY
Ok Punisher!
Added Custom Prime95 run: According to linX available testing memory was 6.7gb. Set Custom memory to 6.7gb, and min/max FFT's to 720k. Ran over an hour just fine no errors!
http://i246.photobucket.com/albums/g...ustomPrime.jpg
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
Last edited by aussie-revhead; 01-28-2012 at 02:51 AM.
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
I think you mean these Patriot DDR3 2000's:
http://www.newegg.com/Product/Produc...82E16820220535
http://www.ebay.com.au/itm/Patriot-P...item1e69740a97
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
Yeah that enough of a stability test for pretty much anything you can throw at it.
I run it overnight - mine always dropped out a thread (and the other 3 followed within 5 mins) between 6 and 8 hours on the custom test. Blend w/7000mb would run for 24 hours no hassle.
Even then though I got the odd issue booting up. A common one was typing in the windows password and getting a completely blue background screen and nothing more. Quick tap of reset and itd boot straight in and be fine all day. I dont think bios support is quite there yet on the 6 series chipsets for this ram.
Having said that the 1600mhz kits are vastly superior to the 1333mhz kit I got. I really would stick to the 1600mhz kits if anyone is considering buying.
here:
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Wonderful!
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Was able to lower my voltage to 1.55vdimm for custom Prime95 6.7gb 720k fft's - 9-10-10-28 1T 2133:
http://i246.photobucket.com/albums/g...rime95155v.jpg
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
Yeah thats sweet dude. Have you pushed bclk at all for 2200mhz?
My 2600k doesn't like anything over 100 for some reason, so no but happy with 9 10 10 28 2133.
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
Bookmarks