As of now I will also be using both.I did more DMM testing with QPI LLC enabled and with 1.3000 set in bios, vdrop is only 9mV and vdroop a further 7mV, so 1.284 under load. Brilliant.
And I actually love this board so much. I re-ran my 4.7GHz HT LinX run and it was going good at 90 GFlops until about 20 mins. All I needed to do was lower CPU PLL to 1.7v and it passed with flying colours. Tried enabling C-States for the extra bandwidth but LinX was having none of it, so I just left them off. Measured CPU, QPI and RAM with the multimeter. BIOS values were 1.45, 1.36875, and 1.67 respectively.
4.7GHz HT (142x33), C-states disabled BIOS 1502
CPU: 1.437 real
PLL: 1.7
VTT: 1.352 real
RAM: 1.64 real
All other voltages stock
Looks like I've found a killer daily overclock.Anybody want to try beating 90.6 GFlops with 3700MHz uncore?
Reply With Quote
Bookmarks