Quote Originally Posted by PolRoger View Post
Thanks guys...

Sergio- The bench table model is a Dimastech "Hard". I actually purchased an "Easy/Hard" combo a little over a year ago and I'm currently running the "Easy" table with my FX-8150 combo. It too was converted to water and I'm now running an Alphacool NexXxos UT 360/XPSC Raystorm block. As far as the new Apogee HD... it seems fine. I've read that it is supposed to be a little less restrictive and offers a small improvement over the XT v.1.2 but I have limited experienced running water. It seems most likely that all of the late generation blocks are competitive with each other these days.




@PiLsY- That seems odd that your MIVE doesn't clock as well with "offset" vcore as your other Pro board does ...

I have an P67 EVO and I've never noticed a difference when using offset as compared to my MIVE. I ran overnight at 5.0Ghz "crunching" WCG (~16 hrs.) with fixed vcore but I'll try testing it with "offset" as I was running my previous daily o.c. of 4.6/4.7Ghz using the offset method.
I love the black one wish i can bring one here but weight and size is a matter thru customs

as for what Pilsy is doing i dont agree but well he is the owner of the hardware inmo doing linx at such high load its busting the chip with no purpose, as i explained even on a crappy cheap Asus offset works fine just take more vcore a way more and aint stable as manual

for ex my SAME chip 5GHz stable HT ON on the MIVE manual vcore needed 1,45 load

and on the Asus cheap board u only reach 4.8GHZ on SAME vcore more leads to unstable and imposible

cheers to all
Sergio