Quote Originally Posted by andressergio View Post
PiLsY why use offset ? i have the same thing chips degrade or settle over time, i runt my chip that its a x56 and x50 stable INT PLL OFF at 1,425 with HT but since i did the Parking Core mod i need a bit more food so i run 1,435 and my patriots 16GB 2133 CL9 push the IMC so well, thats what is needed to be stable, but i dont run prime or linx over hours as it was proven for me and others that u can be gamming hard and have BSOD so i just observe the PC On the week, as its my only PC i use it for all, for download overnite and gamme heavy gammes with VGA OC'd so thats it if i find a BSOD i just correct and test again using a bit of vcore. OFFSET volts need way lot of vcore on idle to be stable thats also tested not only by me.

cheers and good luck
Sergio
Works perfect on the Pro though - I have both set up at the moment and can swap the cpu between them. I feel far happier running 1.53v load if its dropping down to 1.08v idle. There's no way Id want to run over 1.45v 24/7 on manual fixed voltage. I just really expected the M4E to be everything the Pro was and more.

Definitely no 124 idle problems on the Pro using low offset and 100% LLC at 5ghz. Then again you cant set extreme phase on the M4E and enable offset, you can on the Pro.

I need to test with a different psu but both my units are seasonic S2 based so im stuffed really. It feels power related and fiddling in the digi+ settings can make it better/worse.