GSkill 64GB @ 2600MHz...

[Raja@ASUS]

GSkill 16GB DDR3-2133 9-11-9 kit @ DDR3-2400 10-12-10-28 1T

3Hours Prime 95, with 14GB assigned:



Uploaded with ImageShack.us


VCCSA 1.05V VDIMM 1.68V. Voltages are CPU and memory module dependant.

tWR 16
tRTP 6
tFAW 24
tWTR 6
DRAM WL 9

tRRDR 6
tRRDD 6

All others can be left at default.

[JasonDTM]

Good MC on that 3930 brother Raja.

[Vivi]

siiiick!

but no 2600?

[Raja@ASUS]

siiiick!

but no 2600?

2600 will need the right CPU. There are quite a few that don't like 2400 much. Where the R4E comes into play is that this board runs 1T where other boards struggle with 2T. We are still tuning so more to come I am sure.

[fredyama]

better than hypers actually

was at 2400, load elpida hyper profile, change tccd to 10 meaning CL7-10-7-21-1T, set 1.76v dram.
havent tried to push more than 2400 yet, but now you got me interested too.

Yes, Peter-san
With a new 079B bios & G.Skill F3-17000CL8D-4GBXMD BBSE chips.
With my kits, CL8 is far stable than CL7-10-7-21 for modPI, but couldn't reach to 2400-- max out around 2380.
Anyway, SB-E is not for modPI, so just for your inf

[LardArse]

I think I have found the Benchers' 16GB kit

16GB @ CL8-11-10-15-1T-88



They feel like the love child of PSC / Hynix. Look at that tRAS
They love VDIMM and can take even 2.10v, good for strengthening IMC when CPU is cold.

[Calathea]

Tras 15 at ddr3 2400? Whaaat...

[hiwa]

really nice memories are aircooling? if i set 1.95 they don't boot

[matose]

Anyway, SB-E is not for modPI, so just for your inf

Try tri-channel instead of quad-channel, you'll be surprised

[Hazzan]

GSkill 19200C11 4g x 4 running 9 11 10 28 1T 1.72 Volt with latest bios 0083 R4E

[fredyama]

Try tri-channel instead of quad-channel, you'll be surprised

Hi matose-san,

Thanks a lot for your inf.
Yes, 32M time improved with tri-channel.
I wish I were able to get SB-E like one of awesome high clocker SB 2600K

[stasio]

Hi matose-san,

Thanks a lot for your inf.
Yes, 32M time improved with tri-channel.
I wish I were able to get SB-E like one of awesome high clocker SB 2600K

How about 3 channel and AIDA64?

[Morphling]

ultra fast ssd looool

That was a good point of view!

Super powerfull results there Shammy!

[fredyama]

Hi stasio-san,

Sorry, have never tried AIDA64.
Please someone help me

[stasio]

Hi stasio-san,

Sorry, have never tried AIDA64.
Please someone help me

Hi fredyama-san,
look at Hazzan pic above.
AIDA64...Read/Write/Copy/Latency.

[fredyama]

Hi stasio-san,

Please see the results of triple & quad channel AIDA64.





Cheers,

Fred

Hi fredyama-san,
look at Hazzan pic above.
AIDA64...Read/Write/Copy/Latency.

[stasio]

Thanks,
For 8-10-7-20-1,Vdimm 1.89....!!
Did you try 9-11-9 or 9-10-9 for 2400MHz?

[fredyama]

Thanks,
For 8-10-7-20-1,Vdimm 1.89....!!
Did you try 9-11-9 or 9-10-9 for 2400MHz?

You are welcome

Here is modPI 32M @2400MHz result at the same CL8 setting.
Just needed cold weather, window opened and added an extra 8cm DELTA TFB0912GHE.
I tested this retail G.Skill kits up to 1.95V @CL6-9-6-19-70-1T on 2600K, but seems 1.89 - 1.9V suites better