Project: Chokolate Temptation

[kskz_91]

I feel it is time for an update, I sat the other day and sleeved a client's PSU when the doorbell went crazy ... usually the postman does not come so late but he did anyway... there is nothing to complain about directly as I have waited as hell for this package! It is more or less
Gareth from Corsair who wanted to push on project by sponsoring me with a couple of handpicked Corsair Dominator GT 2000MHz (4GB x2) memory modules. Can't say more than that I am som happy with theese babys! I would first get a pair of 213MHz memory modules with the same details, but I would have to wait for them to be newely constructed so I choose theese instead, the big difference is only the memory frequency and could easily be fixed by overclocking them in bios, the latencies and voltages are exactly the same so it's simply no big deal.



I think it will be more time for pictures ... And yes ... them could well have been better, I think ... is not that worth pleased with them so that they became, but otherwise I agree they do fine.

Me and my brother are on to a sketch and some different plans for a cheap "studio corner" that anyone can afford and still take great photos with it.
It will contain some everyday stuff that you can come over for a cheap price ... New in store is what counts, yet cost no more than(30-50$), it is intended addict on what size you're after of course. I will add a gallery description and what things you need for this mini-project as soon as I made my own and tested it!














Time for the water block ... something I waited a long time for. This was a very easy procedure that went surprisingly quickly without any problems, it clearly just looks wonderfull!

[LeandroJVarini]

These blocked memories are beautiful! I want to do this in my project!

[kskz_91]

These blocked memories are beautiful! I want to do this in my project!

Yes they are dude !, Hehe

[kskz_91]

Here are some pictures of the part I'm doing at the moment, I hope you find the bends was great!
I also checked each radiator should be.

[kskz_91]

Have got some PM lately, and there was questions about if i could put everything together necessarily just to see how it will look inside the case, said and done, here are some pictures... they are pretty dark(dark inside the room and no daylight)
Look how much space i have got left there :dremel:

[Morphling]

That's realy cool

[kskz_91]

That's realy cool

Thanks dude !

[mlwood37]

Hi there "Mick" from Mayhems.

Can you fire over a email to steve at mayhems dot co dot uk Ref the White Pastel fluid (i think 2 x Ltr Should be enough all so please add in email say ive told you to contact him and we are sponsoring you). I will all so give him a 1 Off 10ml Dye so you can just the colour as necessary. This dye is brown and should give you the ability to make the colour you wish.

Mick

[kskz_91]

Hi there "Mick" from Mayhems.

Can you fire over a email to steve at mayhems dot co dot uk Ref the White Pastel fluid (i think 2 x Ltr Should be enough all so please add in email say ive told you to contact him and we are sponsoring you). I will all so give him a 1 Off 10ml Dye so you can just the colour as necessary. This dye is brown and should give you the ability to make the colour you wish.

Mick

I will do it right the way !
Thank you for the support my friend !

[mlwood37]

no problem. Keep us informed on how ever thing goes and wish you the best on you project. i know you have been at it for a while now but good things come to toughs who wait.

[kskz_91]

no problem. Keep us informed on how ever thing goes and wish you the best on you project. i know you have been at it for a while now but good things come to toughs who wait.

Thank you
I'm whating for some parts to be cnc-milled so that i can measure eaven more and hope that everything will fit as i want it too
I also want everything to be very nicely done, you can never whait too long for something good right :P

[kskz_91]

no problem. Keep us informed on how ever thing goes and wish you the best on you project. i know you have been at it for a while now but good things come to toughs who wait.

Now I have another package consisting of the coolant to my system from Mayhem Dye
I thank Mike from Mayhem dyes course that sets up and has sponsored me with their new Pastel series coolant.



As soon as I got it startet dying it and took some photos at the same time on the coolant
Can happily say that I am happy ... to a certain point ... but I still can not produce the color I want to when the coolant is completely dark purple / pink after a while.
What other dye from Mayhem think you can make my mix brown?
So it is just the dark tone I'm after but hell it does not become brown :/
No chocolate rain this time anyway :/
Now to the pictures









Deyetime!



2 droppes dye



4 droppes dye



6 Droppes dye



8 Droppes dye







As you can see, the more years the purple side, will try to maka a video today so that you can take a better look on it, however the actual color due to the SB-24 flash im using and it looks like its more brownish bit in IRL its actually Purlpeish...

See you soon

/Kosovar

[UrbanSmooth]

Looks like chocolate milk.

[kskz_91]

yeah it kind of does, but its to purpleish right now, need some more dyes to fix the color :/

[davidkozat]

Cant wait to see this run transparent loops

[kskz_91]

Cant wait to see this run transparent loops

What do you think about me then ;D!????

[MrBean]

Great job so far, cannot wait to see the end-result

The paracord is a nuisance to work with, but the end result is amazing! Keep up the good work, Mate, just luv this!

[kskz_91]

Great job so far, cannot wait to see the end-result

The paracord is a nuisance to work with, but the end result is amazing! Keep up the good work, Mate, just luv this!

Thanks dude, i appreciate that !

Update in a few minutes

[kskz_91]

Hello

Today I can happily announce that I have received a new packet from the SpecialTech containing

Bits Power Radguarg
Bits Power Q-Block
Koolance Mini extender G1 / 4

I have also begun to sketch on the side panel where the cutouts for the radiator will be, I think that I also have to couple of welds with the TIG-welder to do beacause the case is made by two part which is set together(i really dont like that idea)...i hope its still left in the workshop :/









I've just measured and clearly designed by ... what do you think about the location?

[kskz_91]

Now it feels like things are finally falling into place!
I have now for some time talking with Zotac and have actually been offered me an sponsorship.
Thanks to Hansel, Cherry, Sandy, Kevin and Chris who showed his great interest for my project



I have been sponsored by Zotac with these great components:

Zotac Z68 ITX WIFI



Zotac GTX 470

[kskz_91]

I thought it was time to contribute something new ... I will soon buy a new Dremel so I can boost the building again, as long I will offer you guys some renderings.

[kskz_91]

I thought it was time to do a mini update on what my latest addition has to offer

A package from Zotac har ariven This is just a little preview photos taken with my phone in my dark room ... can it get better? ... will be to take real photos then also system camera is back from service.

Zotac Z68-ITX WiFi
Zotac GTX 470 in a different package only





I have assembled some components, but lacks, however, a processor so far ...
Now, I really noticed how small the motherboard really is: O!
I will test my graphicscard right on and see how it works as it should be

It was for this time, I come up with new and much better pictures soon!

[UrbanSmooth]

Looking forward to it.

[kskz_91]

Hello everyone!

I have to say that i have got some complaints that I have not done any updates in a while :/ ... The truth is that iat is so... but I did anyway take my thumb out and started to play around with all the things that I had at home today, its nice to finally have some sparetime afterall

I dont have that much to tell you guys but today I wanted to see how everything is going to sit, I even did the planing for my tuberouting and what should be done on the chassis before it prepares for the ALU-weld and paint preparation.

I have been thinking of re-sleeving the power supply ... What do you think guys?
What I have at home right now is: Copper Brown, Vanilla Sands, Black, Color-X, Red, B-magic and little else from MDPC-X, including mass of different colors from Djungelapa
I haven't decided that yet...and I will also crimp that sleeve aswell!
I have been thinking for a while if my powersupply will work 100% to runmy system in LOAD :/ ?

Here is todays Picdump
I really have to fix the soft box that I have been planing to make for some time now and never had time to

[UrbanSmooth]

Nice little update. Get going on this.