MaximusIV-Extreme Thread

[andressergio]

any of you guys running 16gb 2133 or above?
i know i saw someone with patriot 16gb running 2133.. could you link me to that specific model?

thanks

that someone is me badata lol

yes sure i have 16GB 4x4 running 2133 9-11-9-27 1T and they go to 2175+ same volts not touching anything

here

http://www.ramexperts.com/ddr3/perfo...op-memory.html

i tested lots of 4GB kits and for the price and perf this a far the best i took ma I7 to 5600 withouth droping lower than 2133 and not touching volts

cheers
Sergio

[fab-45]

What about mouse drivers,are you using the driver disk for the mouse,or just windows default drivers,could be an option.

i test with razer driver = problem
without because razer say me uninstall it = problem

i don t know what is the problem and all mouse on my motherboard do that

thanks for your help

[Boulard83]

My MIVE go away tomorow

A RIVE or a RIVF witha 3930k gona take its place. With a lil WC loop for the CPU

CPU and memory ordered. Im not yet decided about the X79 mobo ....

[andressergio]

My MIVE go away tomorow

A RIVE or a RIVF witha 3930k gona take its place. With a lil WC loop for the CPU

CPU and memory ordered. Im not yet decided about the X79 mobo ....

grats Boulard hope u get a nice one

what is the RIVF ?

[Boulard83]

grats Boulard hope u get a nice one

what is the RIVF ?

Rampage IV Formula

Im waiting for the pricing on the formula cause i dont need the LN2 feature of the Xtrem. If the Formula is a little cheaper with the same VRMs and PCIe slots, ill take the Formula.

The P9X79 WS also have a good PCIe layout.... but the color isnt good

[moorhen2]

You can allways give this a go,it may help."I think there may be a setting for changing USB 3.0 designation to PCH in UEFI - check under the Advanced sub-menus in the onboard devices configuration sections. Changing that setting to PCH may help if UEFI has it."

[moorhen2]

i test with razer driver = problem
without because razer say me uninstall it = problem

i don t know what is the problem and all mouse on my motherboard do that

thanks for your help

Give this a go,someone on the ROG forums was having a similar problem."I think there may be a setting for changing USB 3.0 designation to PCH in UEFI - check under the Advanced sub-menus in the onboard devices configuration sections. Changing that setting to PCH may help if UEFI has it.

EDIT Sorry,double post.

[fab-45]

Hello

in bios i have PCH / NEC > i put PCH

what is UEFI exacly ?

and UEFI ? with NEC or PCH setup ?

Thanks for your help

[andressergio]

Hello

in bios i have PCH / NEC > i put PCH

what is UEFI exacly ?

fab


and UEFI ? with NEC or PCH setup ?

Thanks for your help

im sorry that never happened to me and i doubt really its the motherboard have you tried with a normal mouse and reproduce the problem ?

UEFI its the technology of BIOS Unified Extensible Firmware Interface (UEFI)

cheers
Sergio

[fab-45]

im sorry that never happened to me and i doubt really its the motherboard have you tried with a normal mouse and reproduce the problem ?

UEFI its the technology of BIOS Unified Extensible Firmware Interface (UEFI)

cheers
Sergio

Thanks

i test with Saitek RAT 9 / microsoft optical / logitech G9 all mouse have problem in game and in windows seven 64 or 32 bits

[McDown]

Hy guys I have very strange problem. I can't rename overclock profile in bios. The field with profile name kinda greyed out and it wont let me to type anything in it.

[the_real_7]

Happy to be back on My 2600k and My mive , after trying out a 3930 and x79 board and seeing how much slower a workstation can be , im really appreciating the benches my rig is pushing out in stable 24/ 7 configuration , later this week going to push for some high numbers . . .

Mive and 2600k THE YAY


Rive and 3930k THE NAY

[andressergio]

Happy to be back on My 2600k and My mive , after trying out a 3930 and x79 board and seeing how much slower a workstation can be , im really appreciating the benches my rig is pushing out in stable 24/ 7 configuration , later this week going to push for some high numbers . . .

Mive and 2600k THE YAY


Rive and 3930k THE NAY

glad we have you back T !!!

cheers
Sergio

[the_real_7]

glad we have you back T !!!

cheers
Sergio

Thanks Sergio ! ! ! glad to be back . . .
can i see some of those benches with that ram of yours later, Im thinking about getting looks like nice stuff , with 16gb

[andressergio]

Thanks Sergio ! ! ! glad to be back . . .
can i see some of those benches with that ram of yours later, Im thinking about getting looks like nice stuff , with 16gb

Sure Tony !!! this is so far my best rig i ever built, the chip is amazing its a x56 but i only did a couple of benches and now runing 5ghz or 5.1ghz daily

here some screens with the 16GB of Patriots and pushing bclk on the MIVE










Uploaded with ImageShack.us

[zsamz_]

hey Sergio you miss the gigabut ?

[andressergio]

hey Sergio you miss the gigabut ?

i have to say a big NO !!! lmao

[[XC] Synthetickiller]

@ andressergio

You run your 2600K @ 1.425v 24/7? I thought the wall for "safety" was 1.4v. These can be bumped a little higher?

I'm on water as well.

@ the_real_7

1.44v is 24/7 on water? Wow!

I think I could get 5.1 or 5.2 ghz w/ that much of a bump.

[the_real_7]

i have to say a big NO !!! lmao

Agreed 100 percent , gigabyte fumbled the ball with ud7 having such a great board a lacked support when it was most needed , to make that board really competitive with countless untested bios ,

[the_real_7]

@ andressergio

You run your 2600K @ 1.425v 24/7? I thought the wall for "safety" was 1.4v. These can be bumped a little higher?

I'm on water as well.

@ the_real_7

1.44v is 24/7 on water? Wow!

I think I could get 5.1 or 5.2 ghz w/ that much of a bump.

I can hit higher with lower vcore but im still a prime stable addict , most people out here with low voltages , dont feel that there is a need for prime stable as long as you pass some programs , I feel i want to be 100 percent assured my system isn't having miscellaneous glitches from a overclock . . . but we all have different goals here on xs some people bench bench I bench 100 stable . .
As for Sergio he gets the golden chips , seems to be his luck of the draw but can you bump higher hell yea , chip only get damage mostly at 1.550 and higher under extreme condition with aggressive load line . . . . but it is rare , if your cooling is taking care of the heat

[zsamz_]

I can hit higher with lower vcore but im still a prime stable addict , most people out here with low voltages , dont feel that there is a need for prime stable as long as you pass some programs , I feel i want to be 100 percent assured my system isn't having miscellaneous glitches from a overclock . . . but we all have different goals here on xs some people bench bench I bench 100 stable . .
As for Sergio he gets the golden chips , seems to be his luck of the draw but can you bump higher hell yea , chip only get damage mostly at 1.550 and higher under extreme condition with aggressive load line . . . . but it is rare , if your cooling is taking care of the heat

exactly
i can run linx @ 1.4v but i rather run 1.425v @ 5.0
i know @ 1.38v its not gonna pass

when i run 4.8 i'm good @ 1.36v i didnt bother to see how low i can go

lucky sergio

[the_real_7]

exactly
i can run linx @ 1.4v but i rather run 1.425v @ 5.0
i know @ 1.38v its not gonna pass

when i run 4.8 i'm good @ 1.36v i didnt bother to see how low i can go

lucky sergio

you have almost like the same chip like as Sergio , beside his imc , cause man he can push all kinds of ram with that baby ! ! ! or maybe in the asus maximus , with this board my stableness and overclocking had become so much easier I don't know if i should try new bios or stick to 2001 . . . .

[[XC] Synthetickiller]

I can hit higher with lower vcore but im still a prime stable addict , most people out here with low voltages , dont feel that there is a need for prime stable as long as you pass some programs , I feel i want to be 100 percent assured my system isn't having miscellaneous glitches from a overclock . . . but we all have different goals here on xs some people bench bench I bench 100 stable . .
As for Sergio he gets the golden chips , seems to be his luck of the draw but can you bump higher hell yea , chip only get damage mostly at 1.550 and higher under extreme condition with aggressive load line . . . . but it is rare , if your cooling is taking care of the heat

Ah! I remember for the longest time, people said the wall for these chips was 1.4v. Over that they die. Apparently not.

I'm not a primestable addict, but if I can pass 1 hour, I'm happy. I have not had one BSOD at 5ghz yet. I don't need the extra speed, but who am I kidding, this is XtremeSystems! I might bump it a bit higher in the future, although I'm not sure, lol. 5ghz is already overkill.

Let me ask this, what should my max temp on load be just to make sure I don't degrade my chip?

[the_real_7]

Ah! I remember for the longest time, people said the wall for these chips was 1.4v. Over that they die. Apparently not.

I'm not a primestable addict, but if I can pass 1 hour, I'm happy. I have not had one BSOD at 5ghz yet. I don't need the extra speed, but who am I kidding, this is XtremeSystems! I might bump it a bit higher in the future, although I'm not sure, lol. 5ghz is already overkill.

Let me ask this, what should my max temp on load be just to make sure I don't degrade my chip?

that would be the whole Intel spec thing again 1.4 , then for that we should of bought intel boards this processor been out a year so we've seen our boundaries , there people running these thing in the high 1.6v fields and doing fine but they got massive cooling and im not talking water lol . . . don't be scared to bump it up I stay under 70 but im water cooled , i say anything under 75c is way safe as long as you not loading for 24 / 7 . .

5ghz nice dude , sounds awesome your running a hour on prime that's a pass for me , Sergio will be on later screaming lunch bf3 the ultimate torture test .
Im have to bump it up when i get home , you all making me jealous

[PolRoger]

Has anyone ever had problems with the Renesas USB 3.0 controller on this motherboard? I've pretty much always run with it enabled and have never had any problems but recently in windows it seems to be acting up? I'll sometimes get a conflict message regarding a usb device and my BOINC "crunching" program stops running. If I disable the controller in BIOS the problems have stopped? Does anyone have any suggestions for troubleshooting? I've been running on the 1850 BIOS...