G.SKILL PIS F3-17600CL7D-4GBPIS 2200 7-10-10-28 1.65V P55 Series

[BeepBeep2]

Not sure, this is all he said:

also, I have been able to get the sst kit to cooperate at 2133 7-8-7-20 yes alot of sticks wont make the grade, however its all about how you finness it in the end.

IMO it was a lower bin kit. 1700 6-6-6 1.7v is not impressive, 1800 6-6-6 needed 1.82v whereas my 2000 C7 does 1800 at 1.71v

[ZenEffect]

Sticks worked for:

Gigabyte Z68XP-UD4 *really diggin' this board
Gigabyte P67A-UD7 B3


the sticks just wouldnt cooperate on the maximus or p8p67-pro.

just poped them back in to run off a validaiton.
http://valid.canardpc.com/show_oc.php?id=2018419

[Dumo]

My old hyper Dom GT Ver. 2.1-2000 C8 scale ok to 2133ish 7-8-7-24 but with Vdimm 1.8+ and high vtt on UD7-B3

[ZenEffect]

to be completely honest, at 7-8-7-20 2133 (it wont 32m a any higher.) is slower than bbse @ 6-9-6-20@ 2220+ on maximus with these sticks. its all in the subs, and the stt isnt quite making the grade. they jog, not run. . Im more in a 24/7 config, and the UD4 does exactly what i need it to... and right now its testing some 2133 7-10-7 Pi's right now. It took a trip around the US and ended up right back on my front door beaten to death. they seem fine and no physical damage.

[l0ud_sil3nc3]

to be completely honest, at 7-8-7-20 2133 (it wont 32m a any higher.) is slower than bbse @ 6-9-6-20@ 2220+ on maximus with these sticks. its all in the subs, and the stt isnt quite making the grade. they jog, not run. . Im more in a 24/7 config, and the UD4 does exactly what i need it to... and right now its testing some 2133 7-10-7 Pi's right now. It took a trip around the US and ended up right back on my front door beaten to death. they seem fine and no physical damage.

BBSE seems to be the way to go, I wish I would have bought some of the 2200 9-9-9 Ripjaw X, as those are one of the higher bins and they should be BBSE like the 2133 8-9-8 kits.

[ZenEffect]

i only have a couple of the 8-9-8 kits, but they all perform very well.

[Dumo]

I'm looking for another set of 2133 C8 ripjawsX to make it 4X2GB...gotta prepare for the new cpu

This one....http://www.newegg.com/Product/Produc...82E16820231434

probly will be back soon for the encore before eol

[BeepBeep2]

to be completely honest, at 7-8-7-20 2133 (it wont 32m a any higher.) is slower than bbse @ 6-9-6-20@ 2220+ on maximus with these sticks. its all in the subs, and the stt isnt quite making the grade. they jog, not run. . Im more in a 24/7 config, and the UD4 does exactly what i need it to... and right now its testing some 2133 7-10-7 Pi's right now. It took a trip around the US and ended up right back on my front door beaten to death. they seem fine and no physical damage.

Moar voltage for 7-7-7?

[Leeghoofd]

Prolly better sticks required. I have 3 GTX2s dimms that don't do 2133 7-7-7-21, not even at 1.76... Other 3 do 2250 7-8-7 1.74

[websmile]

Prolly better sticks required. I have 3 GTX2s dimms that don't do 2133 7-7-7-21, not even at 1.76... Other 3 do 2250 7-8-7 1.74

Random, I have two triple kits of Corsair 1866, 4 sticks run, one sometimes, other doesn´t. run at same level on other platforms, whereas all my remaining 2000 C8 STT run on SB, sold two of my 8 sticks a while ago, they go 1100 7-7-6-20 on UD7 at buyer at 1,76-1,78V, and run as well on my UD5 and M4Gene. All 32M and I don´t see any differences at the Corsair GT for exapmle. Sadly I sold a lot of Hypers that I haven´t tested on SB, but I can see no logical reason why of three sticks with same batch, production date and from the same kit that run at same level on 775, 1156 and 1366 two sticks run on SB and one doesn´t