MaximusIV-Extreme Thread

[Pestilence]

Im at 5ghz with 1902

[Martin.v.r]

andressergio

you will show your BIOS to 108 blck ?foto

[l0ud_sil3nc3]

is anyone using 1598? i'm using it but i haven't used any other bios so i can't compare

not sure if it's good or not

it is newer than 1596, but older than 1902, and all three are 3D01 specific bios.

for 24/7 1409 and 1850 are better choices, as I noticed when I was pushing bclk on 1902 I would lose the first set of usb ports, but other than that it is good for benching.

[andressergio]

andressergio

you will show your BIOS to 108 blck ?foto

sure mate



Uploaded with ImageShack.us

[Martin.v.r]

hmm not this foto,from bios

[bro20000]

Still running my system at 1.375v 5ghz
have a problem with the latest bioses my setting in aida mem bench dont show up right!



http://i19.photobucket.com/albums/b1.../5Ghz1375v.png

[andressergio]

hmm not this foto,from bios

damn sorry Martin lol i will take and post now







Uploaded with ImageShack.us

hope are useful for ya

cheers
Serg

[Martin.v.r]

ty
is it whit c stat ? on

[andressergio]

ty
is it whit c stat ? on

no i just put C1E and EIST for ma 24/7

[Martin.v.r]

ty
max blck whit this cpu on water is 106 x 50
but whit DICE I can 101 x56
vcore hungry cpu

[andressergio]

ty
max blck whit this cpu on water is 106 x 50
but whit DICE I can 101 x56
vcore hungry cpu

well its a x56 Martin very nice not all have that kind of CPU, i have one x56 its a Costa Rica vcore hunger, this Malay its awesome so good that i only tested that and x56 for some runs and i dont want to punish it more

[Dumo]

Sorry a bit OOT

I just got its brother Asus CH5 Formula (preping for AMD FX cpu) and really like it....Easy 2100 7-6-7-20 which is the first time for me. Lol

[Devil_Dog]

Sorry a bit OOT

I just got its brother Asus CH5 Formula (preping for AMD FX cpu) and really like it....Easy 2100 7-6-7-20 which is the first time for me. Lol

I have one on the way as well for the same reason. What chip are you running in it now?

[Dumo]

I have one on the way as well for the same reason. What chip are you running in it now?

X4 955...http://www.xtremesystems.org/forums/...=1#post4951629

[owikh84]

Sorry a bit OOT

I just got its brother Asus CH5 Formula (preping for AMD FX cpu) and really like it....Easy 2100 7-6-7-20 which is the first time for me. Lol

looks good, but u're going to stay longer to watch Pi finish running LOL

[Dumo]

wait, i only have 2100 7-7-7-20-1T LinX stable in my siggy

I meant 2100 7-9-6-20 on AMD 990X

[badatgames18]

what was that "skew driving voltage" for?
sorry i dont know

like an offset?

[Vladutz20]

M4E will support the new Intel 22nm cpus ?

[andressergio]

what was that "skew driving voltage" for?
sorry i dont know

like an offset?

hey mate its for going high on bclk

[badatgames18]

hey mate its for going high on bclk

thanks andre.. i'm trying for 108 myself.. on my ud7 i ran 106.5blck 24/7... you think 108 24/7 is possible without running into any issues?

EDIT: most i can get on this is 105.5 with skew driving voltage @ standard 1.04 and blck skew @ -10
bios 1850

cheers

[andressergio]

thanks andre.. i'm trying for 108 myself.. on my ud7 i ran 106.5blck 24/7... you think 108 24/7 is possible without running into any issues?

EDIT: most i can get on this is 105.5 with skew driving voltage @ standard 1.04 and blck skew @ -10
bios 1850

cheers

my UD7 B2 does 107x but never tried for 24/7

keep trying on the mive

here's some nice guide for ya

http://kingpincooling.com/forum/showthread.php?t=1041

cheers and good luck
Serg

[badatgames18]

my UD7 B2 does 107x but never tried for 24/7

keep trying on the mive

here's some nice guide for ya

http://kingpincooling.com/forum/showthread.php?t=1041

cheers and good luck
Serg

thanks! as i read the guide... i knew what i did wrong, i was just plugging in settings without slowly easing into it. So i did what i had to do with my ud7... went up in blck by .2 each time, reboot do the same thing until i got to 106.5. Old ud7 would revert back to old bios settings from cold boot though... hopefully this doesn't.

Used skew driving voltage: 993
blck skew: -12

Will keep trying to push it.

Appreciate your help andre

[l0ud_sil3nc3]

@ badatgames

here is an older screen shot of 107.6 with voltages that might help you, it is not really efficient as I was just trying to see if the mems would run 2000 6-8-6.



that was on water and with no tweaking of any of the bclk skews / driving voltages, so I imagine 108ish is doable with some work, at least on that chip.

[andressergio]

thanks! as i read the guide... i knew what i did wrong, i was just plugging in settings without slowly easing into it. So i did what i had to do with my ud7... went up in blck by .2 each time, reboot do the same thing until i got to 106.5. Old ud7 would revert back to old bios settings from cold boot though... hopefully this doesn't.

Used skew driving voltage: 993
blck skew: -12

Will keep trying to push it.

Appreciate your help andre

great man glad it worked

[pazza316]

Guys I just got my hands on this board and a 2600K . I have a couple of questions which bios is best for the highest 24/7 stable overclock? also I have noticed two four pin molex headers on the board but on the Quick Start it does not tell you to attach anything to these headers?? Are you guys attaching 4 pin molex connectors to them or not?? and what are they for ? Do they improve stability etc??? Thanks for your help.