I don't think AMD is as interested in blowing Intel away at the high end as they are in blowing them away in mainstream with their new APUs. Bulldozer will be an excellent chip at a good price point. However, Llano and in the future, Trinity are where their real profits will be.
Trinity apparently can run Deus Ex. You can bet that this is where they are placing their main focus. High end enthusiasts represents a small part of the market. They have to increase profits in order to better fund R&D for said products, and you aren't going to do that with lower volume products. Take my company for example. I work in the commercial HVAC industry. The residential business makes all of the money, and our profits are insignificant next to their billions. So its not enough to fund big projects. So we're all pretty much dependent on the biggest business. For AMD, that is mainstream.
http://www.xbitlabs.com/news/mobile/..._Notebook.html
Regards, Stew.....
- This message brought to you by Frank Lee E. Snutz
________________
Main:
Phenom II x6 1090T BE|Crosshair IV Formula|Corsair 4x2GB DDR3|Sapphire HD5870|Adaptec 2405 + Hitachi Ultrastar 15k 450GB SAS, Toshiba MBD2147RC 146GB 10k SAS, Samsung F3 1TB, Seagate Barracuda Green 2TB 5900RPM, WD Black 2TB, Seagate Barracuda ST2000M001 2TB|Asus Xonar Essence ST + HD600|Corsair HX850|HPZR24w|Fractal Define XL Black|Windows 7 X64 Pro
Backup/Storage server:
HP Proliant ML350 G4|2 x Xeon "Nocona" 3GHz|4GB DDR1 ECC|Storage (SCSI): 3x10k 72GB + 10k 300GB + 15k 300GB + Ultrium460 tape drive|Storage (SATA): Adaptec 2810SA + 2 x WD Caviar 250GB RAID0 + Seagate 250GB|Windows Server 2008r2 Datacenter
Other:
HP Proliant DL380 G5|Xeon 5150|4GB FB DDR2 ECC|HP Smart Array P400-256MB cache|3x10k 146GB SAS in RAID 0 + 10k 146GB SAS|2x800W|ATi FireGL V7700|Samsung 226BW|Windows Server 2008r2 Enterprise
HP DL320 G5|Xeon 3150 2.13GHz|1GB DDR2 ECC|2x80GB RAID 0|Windows Server 2008r2 Standard
Laptop:
HP 8560w|i5-2540M|2x4GB DDR3|AMD FirePro M5950|Samsung 840 Pro 256GB|Windows 7 X64 Pro
yeah i know it's shame,... anyway, this is surely the best simulator i have flight ............
At same time i can understand, peoples don't want forcibly put so much time to be able use the system of the plane, and want more " direct action... " ... but this is just the most perfect simulator i have ever seen... and seriously i was start to be in pain to play old simulator with really outdated graphics ( and the A10 graphics are just really nice, this is a nice addition over the extreme realism of the avionics of this simulators )
Last edited by Lanek; 09-17-2011 at 09:08 AM.
CPU: - I7 4930K (EK Supremacy )
GPU: - 2x AMD HD7970 flashed GHZ bios ( EK Acetal Nickel Waterblock H2o)
Motherboard: Asus x79 Deluxe
RAM: G-skill Ares C9 2133mhz 16GB
Main Storage: Samsung 840EVO 500GB / 2x Crucial RealSSD C300 Raid0
Hornet331, did you know that the CPU you sell as higher binned one, you will sell in 100s, and the same CPU which you bin lower and less pricier, you will sell in 100s of thousands. So tell me which way makes you more money?
All the money in GPU and CPU business comes from lower end stuff. That's where volume is.
No he doesn't know that, because it isn't true. According to AMD's most recent Quarterly Filing, the APUs represent a lower cost product. Its in the footnotes. Manufacturing processes are never black and white. Not only do the APUs represent a lower cost product, but higher volume of sales.
Additionally, lets say that you are correct and both products cost the exact same in variable costs. You sell 10,000 of your low end, and 1000 of your high end. The low end product sells for 100, and the high volume for 250. Your revenues are 1,000,000 and 250,000 respectively. So, we're back to square one. Even if you were correct and cost is the same for both (which it is not), you still are not making that much on your high end chips.Excerpt from SEC Filing:
Computing Solutions operating income was $142 million in the second quarter of 2011 compared to $128 million in the second quarter of 2010. The
improvement in operating results was primarily due to a $16 million decrease in cost of sales and a $10 million decrease in research and development
expenses partially offset by a $9 million increase in marketing, general and administrative expenses. Cost of sales decreased primarily due to increased
volume of lower cost APU platforms. Research and development expenses decreased and marketing, general and administrative expenses increased for the reasons set forth under "Expenses" below.
Computing Solutions operating income was $142 million in the second quarter of 2011 compared to $100 million in the first quarter of 2011. The
improvement in operating results was primarily due to a $17 million decrease in research and development expenses and a $14 million decrease in marketing, general and administrative expenses. Research and development expenses and marketing, general and administrative expenses decreased for the reasons described under "Expenses" below.
Computing Solutions operating income was $242 million in the first six months of 2011 compared to $274 million in the first six months of 2010. The
decline in operating results was primarily due to a $46 million increase in marketing, general and administrative expenses and a $36 million increase in
research and development expenses, partially offset by a $13 million decrease in cost of sales. Marketing, general and administrative expenses and research and development expenses increased for the reasons set forth under "Expenses," below. Cost of sales decreased primarily due to increased volume of lower cost APU platforms.
In general, the less expensive the product, the higher the volume of sales. In order for the high volume products in my example to bring in the same revenues, they would have to sell for ten times as much given a 90/10 mix. Or For the same price it would have to be 60/40 for mainstream/high end respectively.
Last edited by Stewie007; 09-17-2011 at 09:39 AM.
Regards, Stew.....
- This message brought to you by Frank Lee E. Snutz
AMD should have excellent cost control for their manufacturing considering their current contract supposedly leaves GF to eat all the non functional dies. Yields could be 1% but other than being supply limited GF would be eating those costs.
I'm sure the manufacturing costs will eventually be averaged into AMD's cost (unless GF doesn't care about profit) but right now AMD should be in heaven in regards to manufacturing costs.
Work Rig: Asus x58 P6T Deluxe, i7 950 24x166 1.275v, BIX2/GTZ/D5
3x2048 GSkill pi Black DDR3 1600, Quadro 600
PCPower & Cooling Silencer 750, CM Stacker 810
Game Rig: Asus x58 P6T, i7 970 24x160 1.2v HT on, TRUE120
3x4096 GSkill DDR3 1600, PNY 660ti
PCPower & Cooling Silencer 750, CM Stacker 830
AMD Rig: Biostar TA790GX A2+, x4 940 16x200, stock hsf
2x2gb Patriot DDR2 800, PowerColor 4850
Corsair VX450
It's no different than the deal with TSMC, and I wager other companies have similar deals with fabs, so not really a big advantage for AMD.
"No, you'll warrant no villain's exposition from me."
While I don't disagree completely with that I would wager AMD & GF's unique situation paves the way for AMD to get a much sweeter deal than anybody else in the industry would get from an independent foundry.
After all one would have a hard time surviving without the other as things stand today. However with GF's owners having deeper pockets to pull from I wager they are getting the shorter end of the stick for the time being to help keep AMD in the black.
TSMC and other independent foundries have a diverse customer base as well as technology offerings as far as different processes are concerned. They are in a much better position to remain viable if they where to lose some fab work from a customer that went out of business. Their number one priority would first and foremost be profitability and survival of their foundry keeping their pricing competitive.
Work Rig: Asus x58 P6T Deluxe, i7 950 24x166 1.275v, BIX2/GTZ/D5
3x2048 GSkill pi Black DDR3 1600, Quadro 600
PCPower & Cooling Silencer 750, CM Stacker 810
Game Rig: Asus x58 P6T, i7 970 24x160 1.2v HT on, TRUE120
3x4096 GSkill DDR3 1600, PNY 660ti
PCPower & Cooling Silencer 750, CM Stacker 830
AMD Rig: Biostar TA790GX A2+, x4 940 16x200, stock hsf
2x2gb Patriot DDR2 800, PowerColor 4850
Corsair VX450
Correct me if I am wrong, but I thought I read several articles stating that we will see a price drop when 2700k was released. The only thing we do not know is when. I still see no point in going with bulldozer unless you have several builds; the price difference between the two might be a small upgrade in GPU or more storage.
My point is, the profits are in the mainstream, via the Llano and future Trinity. BD high end FX chips are not going to be the money makers.
High Volume is always the money maker. The point I was trying to make is that costs are not the same, but given that they were, it would still take quite a bit of FX chips to catch up with the APU revenues.
Besides, its in the bloody footnotes. There is no arguing with that.![]()
Last edited by Stewie007; 09-17-2011 at 06:15 PM.
Regards, Stew.....
- This message brought to you by Frank Lee E. Snutz
so , I hear BD will need a driver to shine?
[MOBO] Asus CrossHair Formula 5 AM3+
[GPU] ATI 6970 x2 Crossfire 2Gb
[RAM] G.SKILL Ripjaws X Series 16GB (4 x 4GB) 240-Pin DDR3 1600
[CPU] AMD FX-8120 @ 4.8 ghz
[COOLER] XSPC Rasa 750 RS360 WaterCooling
[OS] Windows 8 x64 Enterprise
[HDD] OCZ Vertex 3 120GB SSD
[AUDIO] Logitech S-220 17 Watts 2.1
What bulldozer doesn't need a driver to really move
MM Duality eZ modded horizon (microres bracket). AMD 8120 4545Mhz 303x15 HTT 2727 1.512v load. 2121Mhz 1.08v idle. (48hour prime95 8k-32768 28GB ram) 32GB GeIL Cosra @ RAM 1212Mhz 8-8-8. 4870x2 800/900 load 200/200 idle. Intel Nic. Sabertooth 990fx . 4x64GB Crucial M4 raid 0 . 128GB Samsung 840 pro. 128GB OCZ Vertex 450. 6x250GB Seagate 7200.10 raid 0 (7+ years still running strong) esata raid across two 4 bay sans digital. Coolit Boreas Water Chiller. CoolerMaster V1000. 3x140MM back. 1x120MMx38MM back. 2x120MMx38MM Front. 6x120MM front. 2x120MM side. silverstone fan filters. 2x120MMx38MM over ram/PWM/VRM , games steam desura origin. 2x2TB WD passport USB 3.0 ($39 hot deal score) 55inch samsung 1080p tv @ 3 feet. $30 month equal payments no int (post xmas deal 2013)
^That's hilarious! What is that thing?![]()
Main Rig: Phenom II X6 1055T 95W @3562 (285x12.5) MHz, Corsair XMS2 DDR2 (2x2GB), Gigabyte HD7970 OC (1000 MHz) 3GB, ASUS M3A78-EM,
Corsair F60 60 GB SSD + various HDDs, Corsair HX650 (3.3V/20A, 5V/20A, 12V/54A), Antec P180 Mini
Notebook: HP ProBook 6465b w/ A6-3410MX and 8GB DDR3 1600
Bookmarks