***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[xdave]

hi guys, i had this board (z68) for around 3-4 weeks now, amd i can understand why my bios keeps looping, then putting default cpu multiplier, only for me to go in and change it back to 48 and then boot into windows. it doesnt do this everytime, just mose time when booting up from cold, also when its looping (10 loops + sometimes) it sometimes retains the overclock, andother times defaults. this is the same for bios f8 and f9c. i cleared bios correctly after updating (disconnect powercord, hold cmos sw for 30secs +). settings:
2600k at 4800mhz, 48x100, 1.475v, llc7, all disabled except HT, ram at 1.5v Gskill 1333mhz 7.7.7.21.

any ideas would be much appriciated

[Fatbird]

hi guys, i had this board (z68) for around 3-4 weeks now, amd i can understand why my bios keeps looping, then putting default cpu multiplier, only for me to go in and change it back to 48 and then boot into windows. it doesnt do this everytime, just mose time when booting up from cold, also when its looping (10 loops + sometimes) it sometimes retains the overclock, andother times defaults. this is the same for bios f8 and f9c. i cleared bios correctly after updating (disconnect powercord, hold cmos sw for 30secs +). settings:
2600k at 4800mhz, 48x100, 1.475v, llc7, all disabled except HT, ram at 1.5v Gskill 1333mhz 7.7.7.21.

any ideas would be much appriciated

when doing 4.8G, plz enable CPU internal PLL OV

[xdave]

when doing 4.8G, plz enable CPU internal PLL OV

it is enabled. also how do i update backup bios, tried alt + f12 and it just updated the normal bios.