MaximusIV-Extreme Thread

[kagula323]

any compatibily issues between MIVE and Thermalright Archon air cooler? anyone using them?

[andressergio]

Thank you for understanding. It is nice to see someone knows what i am talking about. Like i said it was more my chip then anything and i know the elpida ics wasn't helping. So i will either trade that ram and do a combo on my x58 r3e perhaps. Since they do so well on it. And move forward from there. Thanks

we all understand mate its just you need to read some pages back, its like common thing that some ppl dont read and just post on last page without looking back, this is xtremesystems its FULL of articles, posts, screens, discoverings, guides, and all comes from our experiences from our money to buy and test things and put them here so others can also learn and we also get feedback to keep on learning...its just the way u entered the thread that was bit rude, i just dont see ANY point to go to X58 cauz u just got a bad chip mem or whatever, you can also read that we all tested various chips to get what we want and this mobo its just the best thing i ever had

regards
Sergio

[KILLER_K]

I read through all the pages here as i always do. And you can see where some are using elpida ics and they work fine for them. Plus i'm in here reading everyday through articles and post. So don't think i am just some new guy posting trying to get attention or flaming post.

I have both systems so going to either isn't a big deal. But if you think the 1155 isn't buggy and is 100% solid, then that is the way you feel. I still see issues with the boards and uefi settings, etc. I may not post about reviews, benchmarking and hardware. But i know what is going on with my stuff and the ram i use. I was hoping i could make the ram work until i found some ram that i would like to purchase.

The ram works fine up until 2133mhz but it does blue screen here and there. I'm sure if i took the time to adjust each setting i could cure it. But i'm running 1,866mhz and not having to worry about blue screens and crashing now. But just because i have a different opinion or don't see something the way you do. Doesn't mean i am being rude. The forum works off of people opinions, thoughts and input on stuff.

Where i come from opinions, thoughts and suggestions are always welcome. And if someone states what is on their mind then that makes them a real man. As i don't like for people to stand in the back just saying stuff and not trying to stand up for what they say. Either way, I thought i would clear that up, so everyone would know where i stand. If i say something that makes you mad or you don't like, then that is just me i'm going to say whatever i feel like i need to say about you , a item or anything else for that matter.

It is just me, so that is all i can really say. But life goes on and please continue the thread. I will post anything else i find on my issue here. Thanks

[andressergio]

I read through all the pages here as i always do. And you can see where some are using elpida ics and they work fine for them. Plus i'm in here reading everyday through articles and post. So don't think i am just some new guy posting trying to get attention or flaming post.

I have both systems so going to either isn't a big deal. But if you think the 1155 isn't buggy and is 100% solid, then that is the way you feel. I still see issues with the boards and uefi settings, etc. I may not post about reviews, benchmarking and hardware. But i know what is going on with my stuff and the ram i use. I was hoping i could make the ram work until i found some ram that i would like to purchase.

The ram works fine up until 2133mhz but it does blue screen here and there. I'm sure if i took the time to adjust each setting i could cure it. But i'm running 1,866mhz and not having to worry about blue screens and crashing now. But just because i have a different opinion or don't see something the way you do. Doesn't mean i am being rude. The forum works off of people opinions, thoughts and input on stuff.

Where i come from opinions, thoughts and suggestions are always welcome. And if someone states what is on their mind then that makes them a real man. As i don't like for people to stand in the back just saying stuff and not trying to stand up for what they say. Either way, I thought i would clear that up, so everyone would know where i stand. If i say something that makes you mad or you don't like, then that is just me i'm going to say whatever i feel like i need to say about you , a item or anything else for that matter.

It is just me, so that is all i can really say. But life goes on and please continue the thread. I will post anything else i find on my issue here. Thanks

i saw many ppl use hypers, i have a kit but unfortunately i sold it, i found that after trying lots of kits winners where

mushkin 1600 6-8-8-24 1T 2x2GB they go easy to 2250 for bench and daily 2133 C7

mushkin 2133 9-10-11-28 2x4GB they go up to 2200+ not touching a volt

patriot xtreme 2000 9-11-9-27 2x4GB they go up to 2175 not touching a volt, actually i have 16GB of this at 2133 9-11-9-27 1T 1.65V at 5GHz HT

as i told before not a chip equal to another not even a mobo mine does 108 bclk at 108 x 52, my friend's cant go above 106 etc

maybe its good u try this cheap kit i told u and you will love them its like 82 dols for an amazing and flexible kit of 8GB u can bench or whatever with it

http://www.ramexperts.com/ddr3/perfo...op-memory.html

there u have them

and here its my screens using them at x56

http://www.xtremesystems.org/forums/...-Thread/page54

Cheers and good luck
Sergio

[KILLER_K]

Thanks i'm installing xp for some benchmarks and i will report back. And if i upset you or anyone else for that matter then i apologize. But i'm going to keep the board though. Still working on the chip as i found something odd with it. I will check out the links. Thanks

[Counter CS]

I too have problems running Elpida Hyper with Spi32M, other than that its all fine.

Strange that this tiny bench can kill stability of those nice ICs.

Hope Asus will make the diference on P67 mine field, and bring some nice BIOS suport for all Elpida hyper ICs.

[andressergio]

Thanks i'm installing xp for some benchmarks and i will report back. And if i upset you or anyone else for that matter then i apologize. But i'm going to keep the board though. Still working on the chip as i found something odd with it. I will check out the links. Thanks

yeah waiting your results keep it on ! and report back test max multi using 2 cores so you dont give lots of volts to the chip

g luck
Sergio

[andressergio]

I too have problems running Elpida Hyper with Spi32M, other than that its all fine.

Strange that this tiny bench can kill stability of those nice ICs.

Hope Asus will make the diference on P67 mine field, and bring some nice BIOS suport for all Elpida hyper ICs.

well u have better ram over there cheap and they are PCS and BBGE, check ma posts even on 16GB this tings fly

cheers
Sergio

[andressergio]

Guys i installed another Intel SSD 80GB X25M G2 now i got 3 on RAID0, i just HDDERASE and load the image of W7x64 SP1 and GAMES look at this speeds god !!!



Uploaded with ImageShack.us

[CHiLLiN1369]

Nice Sergio....

[l0ud_sil3nc3]

Guys i installed another Intel SSD 80GB X25M G2 now i got 3 on RAID0, i just HDDERASE and load the image of W7x64 SP1 and GAMES look at this speeds god !!!



Uploaded with ImageShack.us

sick my friend

[andressergio]

Nice Sergio....

thanks bud !!!

sick my friend

lol thanks friend im very happy with this

cheers to all
Sergio

[Pestilence]

Guys i installed another Intel SSD 80GB X25M G2 now i got 3 on RAID0, i just HDDERASE and load the image of W7x64 SP1 and GAMES look at this speeds god !!!



Uploaded with ImageShack.us

Amazing. Thinking i need to add another SSD

[andressergio]

Amazing. Thinking i need to add another SSD

thanks mate yeah its VERY fast

[newhit]

i saw many ppl use hypers, i have a kit but unfortunately i sold it, i found that after trying lots of kits winners where

mushkin 1600 6-8-8-24 1T 2x2GB they go easy to 2250 for bench and daily 2133 C7................

Sergio

How do you get them stable? I cannot get similar Dram to run without debug fault LED's lighting up at default on my MIVE-Z. Are you using a modified "XMP" setting?

Any chance of a couple of dram timing screens or list of important settings?

[andressergio]

How do you get them stable? I cannot get similar Dram to run without debug fault LED's lighting up at default on my MIVE-Z. Are you using a modified "XMP" setting?

Any chance of a couple of dram timing screens or list of important settings?

well maybe i was lucky but i didnt touch anything

Mushkins 2x4GB 2133 9-11-10-28 1.65V trfc 172 i use 112

Mushkins 2x2GB 1600 6-8-6-24 1T 1,65V @ 2133 7-11-7-27 1T 1.65V

and my best mem Patriot Xtreme 4x4GB 2000 9-11-9-27 1,65V @ 2133 9-11-9-27 1T trfc auto

some friends here got the same and rock solid also

cheers tell me if i can help you any further
Sergio

[Boulard83]

Received my MIVE last week. Installed and work like a charm Looks very nice too !

As for now, im running my 2600k 4.5ghz with 1.33v, passed 10x LinX without issue. Ill work for better volts as soon as i can and ill try to reach some good clocks for gaming.

You guyz leave alot of settings on AUTO (like PLL and others ) or you manual alot ?

[Pestilence]

I leave a lot on auto except the Vcore ofcourse. I hit 5Ghz for about 2 hours then said i don't need it and clocked it back to 4.4Ghz.

[andressergio]

Received my MIVE last week. Installed and work like a charm Looks very nice too !

As for now, im running my 2600k 4.5ghz with 1.33v, passed 10x LinX without issue. Ill work for better volts as soon as i can and ill try to reach some good clocks for gaming.

You guyz leave alot of settings on AUTO (like PLL and others ) or you manual alot ?

boulard FELICITACIONES for that rig looks awesome neat !

[Boulard83]

Thnks Andre !

[owikh84]

vcore and temp improved abit with spread spectrum enabled.

[MonsterDK]

Hiya,

Wondered if anyone could help please?

I'm currently at 4.8Mhz and trying to get to 5.0Ghz...

I've tried the following (anything else not mentioned is on Auto)

Vcore: 1.45v
VCCIO: 1.08
CPU PLL: 1.86
LLC: 75 %

@ 100 x 50

I can boot into windows 7, but as soon as I start Prime95 test, instant freeze and BSOD with 101 error code.

Any advice please?

Thanks

[andressergio]

vcore and temp improved abit with spread spectrum enabled.

nice owi what exactly spread spectrum does ?

[Sauron_Vie]

Hiya,

Wondered if anyone could help please?

I'm currently at 4.8Mhz and trying to get to 5.0Ghz...

I've tried the following (anything else not mentioned is on Auto)

Vcore: 1.45v
VCCIO: 1.08
CPU PLL: 1.86
LLC: 75 %

@ 100 x 50

I can boot into windows 7, but as soon as I start Prime95 test, instant freeze and BSOD with 101 error code.

Any advice please?

Thanks

it seems that ur chip needs a bump more vcore. bsod 101 means -> increase vcore

..and pls lower ur cpu pll. 1,86 is much to much.. 1,80 is std. on my chip i can go down to 1,62 without instability.


hth

[MonsterDK]

it seems that ur chip needs a bump more vcore. bsod 101 means -> increase vcore

..and pls lower ur cpu pll. 1,86 is much to much.. 1,80 is std. on my chip i can go down to 1,62 without instability.


hth

Hi,

Any suggestions what sort of Vcore I should try for 5Ghz and how can I find out what sort of max vcore boundaries this chip has? as I don't want to go to much.

Thanks