MaximusIV-Extreme Thread

[Sauron_Vie]

whats the best BIOS for the Maximus 4 Gene-Z?

qgshadow, open up the DPC latency checker program, its a free download, see if those programs produce DPC latency spikes. I have had programs that do that random freeze my BFBC2 on MP before.

using the last official one.. performing not so bad, but i have problems running these f*****corsair vengeance with reasonable speed.

[Devil_Dog]

I just started OC'ing with thus board and am loving it but how do I get past the CPU voltage error during post? Anyway to bypass this?

[Leeghoofd]

just put the setting to ignore in the monitor tab

[Devil_Dog]

Thanks!!!!

[Devil_Dog]

Well, I'm loving this board. With my UD7 I was only able to get up to 54x with my chip. The same chip I can get to the Windows logo screen @ 59x. Don't know if my chip woke up or what but I'm not complaining.

[deachus]

Well, I'm loving this board. With my UD7 I was only able to get up to 54x with my chip. The same chip I can get to the Windows logo screen @ 59x. Don't know if my chip woke up or what but I'm not complaining.

You can get to the windows loading Logo? Or you can get to the windows logon screen? I can get to the windows loading logo with 59X on all of my last 4 chips but only 2 would boot into windows and get to windows logon screen at 55X and 56X. The rest of the chips would freeze at windows loading logo no matter what voltage or settings but would post all the way up to 59x.

[Counter CS]

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?

[Leeghoofd]

VRM frequency upped ? which timings and volts did you try for the dimms ?

[Counter CS]

Hi, thx for trying to help.

Well, i was trying 8-8-8-24-1T 1.65v, vccsa: 1.05v Vccio: 1.15v
CPU @ 4ghz 1.3v just for test Dram clocks.

But didnt touch VRm Frquency.

[Martin.v.r]

NF200 voltset help mem an cpu
cpu ? low vcore

[l0ud_sil3nc3]

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?

not all hypers play well with sb.

try giving them some more volts (1.7ish)

[l0ud_sil3nc3]

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?

not all hypers play well with sb.

try giving them some more volts (1.7ish)

[andressergio]

Well, I'm loving this board. With my UD7 I was only able to get up to 54x with my chip. The same chip I can get to the Windows logo screen @ 59x. Don't know if my chip woke up or what but I'm not complaining.

damn man congrats !!!

[andressergio]

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?

counter 1905 bios ? where is that ?

[l0ud_sil3nc3]

counter 1905 bios ? where is that ?

think he meant 1902

[M_T_M]

This settings is ok?

[qgshadow]

whats the best BIOS for the Maximus 4 Gene-Z?

qgshadow, open up the DPC latency checker program, its a free download, see if those programs produce DPC latency spikes. I have had programs that do that random freeze my BFBC2 on MP before.

But even if i monitor.. if the PC locks up, i can't do anything ... Hard reboot will reset everything.

[M_T_M]

Is 1.5V for 5.0ghz ok for 24/7?

[Martin.v.r]

´MTM
set all speed step to DIS..

[owikh84]

just noticed that the max VRM frequency on MIVE-Z is 550MHz only in bios 0403
I need higher VRM speed to get lower vcore & avoid BSOD 124

[M_T_M]

What voltage should change to 5.0ghz? Here are pictures from the BIOS. I have Maximus IV Extreme-Z.

[andressergio]

What voltage should change to 5.0ghz? Here are pictures from the BIOS. I have Maximus IV Extreme-Z.

mate i would load EXTREME PROFILE wich gives you a basic OC template we all use mostly and then just put vcore u want

use 75% of LLC
VRM on 350

internal PLL enabled

cheers
Sergio

[MonsterDK]

Did anyone get any further with this Vcore offset feature, and running a stable setting?

[M_T_M]

Set this EXTREME PROFILE on YES?

[andressergio]

Did anyone get any further with this Vcore offset feature, and running a stable setting?

nope i didnt even try chip is fine with C states on or off