MMM
Results 1 to 25 of 823

Thread: **Official** Asrock Z68 Gen3 Extreme7 & Extreme4 thread

Hybrid View

  1. #1
    Registered User
    Join Date
    Dec 2004
    Location
    SW Mitten State, USA
    Posts
    90
    Quote Originally Posted by icedtea View Post
    I dont have a capture card (I do but its so old there arent any drivers for W7 x64), but since I do have a PCI sound card, an X-Fi Platinum, I put it in to see if there were any problems. Well, when I put the X-Fi in the lower PCI slot I too ran into problems, the driver couldnt find the sound card! Also noticed that the onboard sound, Realtek, was missing from the system when I put the X-Fi in that slot.

    Could it be that there is some kind of conflict problem with this PCI slot? When I put the X-Fi in the upper PCI slot (the one closer to the CPU) the X-Fi was recognized by the driver and I could install it without a problem so it seems like its only with the lower slot. I also tried disabling the onboard sound to see if it would help, but it didnt do anything.
    I've had my X-Fi in the lower PCIe slot all along. One thing about the PCIe X-Fi cards; Creative has a downloadable patch on their site for this, but they aren't auto-detected on a lot of system boards. Creative seemed to hint this was a Windows 7 thing; I think it is probably something on their end. Once the patch is run though, installing the drivers picks up the card. I had this happen on my previous Gigabyte board.

    Maybe I'll try putting the X-Fi in the middle slot and the Hauppauge in the bottom though, just in case.
    Core i5-2500 @3.7-4.1GHz, GIGABYTE GA-Z68XP-UD5, 16GB (4 x 4) G.Skill Ripjaws X PC-1866
    Corsair 650D, Seasonic X-750 Gold PSU
    WD `Raptor 600GB, Caviar Black 1TB, 2x NEC 7200 SATA DVDRW
    XFX Radeon 6970 (reference), Hauppauge HVR-1800, X-Fi Titanium, Dell 2407WFP

  2. #2
    Registered User
    Join Date
    Jul 2007
    Posts
    31
    How do you guys take screen shots of UEFI? I've tried googling, youtube, and looking through the manual but can't seem to find anything on how to do it.
    Asrock x4 gen3 | 2600k @ 4.4 + hyper 212+ | sapphire 6970 xfire | Mushkin 2x4GB 1866 | Consair 1000W | Haf 932 | C300 / 2x 2TB F4
    Abit IP35 Pro | Q6600 + tuniq 120| 8800 GTS |G. Skill 2x2GB 800 | Consair 520W | Antec 900 | 2x Seagate 500GB HDD | SAMSUNG SYNCMASTER 2333SW 23" Monitor

  3. #3
    Registered User
    Join Date
    Feb 2005
    Posts
    25
    Quote Originally Posted by tinjuko View Post
    How do you guys take screen shots of UEFI? I've tried googling, youtube, and looking through the manual but can't seem to find anything on how to do it.
    Use a USB memory stick. Pressing F12 in UEFI will record a screen shot to the stick.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •