Project: Chokolate Temptation

[kskz_91]

Now i have finally sleeved the whole PSU ... Talk about good timing when we are heading back to Sweden tomorrow,I will really miss them here a lot, for the fun we had on this short time it is quite sick!

Time for some pictures then ... a picture is wort more then a 1000 words, shame I did not have access to the systemcamera, my brother was out for some photojobs... better pictures will come later when I made ​​the hole bigger... so dont worry!

[UrbanSmooth]

Thank God! It's been a little while since my previous Chokolate fix!

[kskz_91]

Thank God! It's been a little while since my previous Chokolate fix!

HAhha no problem

[LeandroJVarini]

nice work!

[kskz_91]

nice work!

thank you !

[kskz_91]

Now it's time for a little update, I think, a bit late as usual but I have had much to do now when you come back from home ...
Can the course anyway to say I got a pretty nice birthday celebration, and two packages from my sponsors I have also had time to strip the chassis on all parts and test fitted the reservoir a little, I will very shortly start modding process so you can keep up now ! Also has some Sleeving come to be made

What I have planned to do:
-Make the hole bigger on the PSU plate to make room for all the sleeved cables
-Sleeve the rest of all cables which is left to be sleeved
-Build radiator plate/holder
-Milling out a PSU SFX Raiser
and mutch more

I thank my sponsors Fractal Design Ooh Bits Power to help me with their products and that they showed great interest in my project!





Now comes a picture bomb ... and yes do not have access to the camera system when my brother borrowed it from me, but the pictures are taken with a newer digital camera yet, pictures are not good :/... aja enough talk here, you pictures ... was so good and enjoy!

We start with the package from fractal ... I got a Fractal Design Array R2 as I waited for ages on! You see, it also is also itself a Fractal Design Define XL, this is when the chassis my twin brother has been sponsored by his new watercoolingbuild ...





Unpacking!











6 Screws later...





Additional 4 screws ...



Tillbehörslådan med bra o ha saker...mestadels skruvar till hårddiskarna och lite distanser samt div. skruvar...





Now its almost all empty...











I wanted to check on with this button in case it can be modified or not, what I had in mind is to simply replace the blue LED with a white one . which in this case seems to be possible!, I have hopse for the best because otherwise it will be replaced by a new one, simple as that ...





Tests the reservoir a little ...it fits, but some changes must be made on the reservoir mount so it can be moved as far up as possible






Then it was time for the package Bits Power has sent to me, consisting:
1x GALAXY FREEZER DIMM2
1x Black Freezer VG NGTX470 POM Top With Matt Black Panel
1x DDC TOP POM Version
1x O-Ring Set II
2x G1 / 4 "Matte Black CaseTop Water-Fill SET
2x Matt Black Q-Block
12x G1 / 4 "Matte Black Stop Fitting
2x G1 / 4 "Matte Black Rotary G1 / 4" Extender
2x G1 / 4 "Matte Black Temperature Sensor Stop Fitting

Coming Later:
1x Black Freezer MOS N78AP2 (Matt Black Version) (Model Name: BP-WBN78AP2-MBK)
4 x G1 / 4 "Matte Black Mini Dual G1 / 4" Extender (Model Name: BP-MBWP-C42)

























I Will be porting this a little bit, to give it some higer flow Optimisation!





















That's all for now ... I have had time to measure and test some of the reservoir will fit together with pump + top, etc., then I have found that my G1/4 "dual exteder Rotary fitting will not work properly and that I must have a pair of mini-extenders instead ... that just a few mm can do so much!
pictures on this comes tomorow !

[Frag Maniac]

Odd that you're 3 pages into a thread called chocolate temptation and we've yet to see anything given a chocolate paint job yet.

[kskz_91]

i have to modify the case first, then comes the preparations and at last the paintjob

[kskz_91]

Hello Guys!

Today I have not had time to do all that much, but it was anyway something when you still were tool-home ...

I felt I had to do something about the fans... not because the cable is ugly ... whis they are not...but to make it flow with the rest of the theme









After those two fans I had a closer lookt at the start button ...I may fix me a 1.8mm LED tomorrow and then i will sleeve those cables aswell.



While I am passing by to the shop tomorrow I'm also going to fix the cable hole on the PSU bracket and the reservoirholders aswell...I have to buy some ulist too to make the cablehole look tidy!







I was for some reason somebody idea and I was looking where we had left the drill, once I had found it and began to remove some rivets, it looked like this ...





What I wanted with this was to create a backinlet, clean but nice ... Sure do, now I just need to fix more holes

Measured if it is possible to get there two pieces of 80mm fans ... and it worked!



Looks damn clean! ;D







When I got tired in my head, I sat around with BP stuff and played how it all would sit ... came to the conclusion that I must have a mini-extender or the pump will not be able to fit!

Q-Blocks are great to have the temp sensor input, etc. will fix so that the fillport and the tempsensor will sit on the Qblock while it goes to the res, should work this way





Here's how it looks almost the entire package out ... no pump and miniextender course ...





this was it for this late night!

[kskz_91]

Now I come with a small update to the people ... has not happened all that much since I have devoted myself to work!
But always do it anyway something on the side ... what I have managed to do until now is that I have made the hole for cables larger, short 8 mm at each end out of reservoir holders, and made it clear PSU for the test, got a 8pin CPU connector out of Stefan, which I needed to get everything ready for that matter, the last thing to do at PSU will be to attach the sata connectors and solder back the fan and I'm ready to go for that matter, I must not forget to apply some thermal compound on the one cooler before fitting out of resentment when it needs it !







CPU connector and assembly ...











So much better!









Quiet ... The scraping will be fixed, the PSU will probably turn brown painted

[Kenjiwing]

Paracord looks great

[kskz_91]

yes it does

[Church]

Hmm .. it seems somewhat less shiny/less reflecting? Looks nice in pics, but i wonder if it will be as good in actual build behind window with leds and alike. I also wonder what are it's properties regarding dust.

[kskz_91]

Hmm .. it seems somewhat less shiny/less reflecting? Looks nice in pics, but i wonder if it will be as good in actual build behind window with leds and alike. I also wonder what are it's properties regarding dust.

no it doesnt reflect at all, i had a lamp 5cm fromm the object and its obviosely it shines a bit but in real id doesnt , it doesnt collect dust anyhow !
Please subb and folow my peoject

[kskz_91]

Whats up Dudes!
Although lying sick in bed so I would surely have something to do ... you can not be stopped without the fuss over something ... so here you finally ....
From a good friend I have with me a package home ... That man is no less than Arthur from coolingstuff (sweden)!
I thank him because he has shown interest in my projects so far!

The sponsorship included:
1x EKWB Supreme LTX Acetal intel
1x Liquid Extasy Vuci Acetal
2x Primochill 7/16 Clear Slang 1m (2m)
1x Arctic Cooling MX-4 4g
1x Isopropylalkohol 300ml
1x Swiftech MCP350
2x Enermax TB silence VR 1500rpm



TTook home the package ... but ... before I began with something so I had o eat something because of the penicillin I made some hamburgers a-lá Kosovar !



The pacage safe at home!



The content that I wrote above ... except isopropylalcoholcan since it will leave till tomorrow!



Fans: Enermax TB Silence VR (built-in fan control ... will be removed and these rotates at 1500rpm instead of 900rpm as the regular ones)



Fan control and 3pin connector, fan control cable will be bridged aswell!





The hose, but the screw to compressionfittings can not screw all the way ... any idea why?











A woundeful thermalcompund!



Southbrigdeblock and its accesories













Double, Mini G1 / 4 "extender ... was on the millimeter and it did not fit ... then ...damn..i will show you guys later!



the Pump !





I am going to solder an 3pin fan cable on to the pump, dont worry...my fancontroller can handle it!







The Cpu block in all its glories ... I did not think it would be that big!













So freaking nice!



Size Difference ...












Time for some assembly...





diferences...need to be thinner...Arghhh :@!



Time for some pumpmodding!









Here i will solder a 3pin cable istead for the 3 and 4 pin conectors , the pcb got some good solderpoints! but not the soldering job :O... wtf its awful !











Changed to the bitspoweroring, the glossy one...





Done!





The loops must be cut and the cable should be fixed late, it will be well Sleeved as well, I will probably test the wc system soon so then there will be a movie out there... actually my first one!
See yaah until next update !

[kskz_91]

Today I will announce a new online webshop which has become one of the new members in my Sponsor Family!



There is no more than the wonderful web shop SpecialTech who will sponsor me with:
1x Hardware Labs Black Ice ® GT Stealth 120mm Single X Flow RadiatorBlack
1x Hardware Labs Black Ice ® GT Stealth 240mm Radiator XFLOW
1x 500 x 500 x 1mm Brushed Aluminium Panel: Gold
4x Neoprene Rubber Edging Trim (1m)
1x Tubing Cutter
1x 500ml Squeezy Bottle for filling Water Cooling Systems
1x Koolance 1 / 4 "Thread Male to Male Coupling Adapter Black
1x Bits Power Mesh Radgard 240 Dual Radiator Black Grill
1x Power Bits 1 / 4 "Thread T Universal Fittings Matt Black

I thank Adrian very much for his interest and support for me in my project!

[JvT]

Subbed. Looks very interesting. Keep up the good work and the updates :-)

[kskz_91]

Subbed. Looks very interesting. Keep up the good work and the updates :-)

Thank you!, I'm very glad that you like it! I will, there will be some updates soon

[kskz_91]

Now I've finally got some time left to make an update to the people

But before I show you something I want to throw up two pictures of Isoprypanolburken I got me away from Arthur, and something I bought my way home from work at Kjell & CO(swedish allround electronic store)





1.8mm 6-7000K Vwhite LED




What I did is that I have had time to finish the whole pump, what is done with it is;
-Soldered of the original cables
-Soldered on a new 3pin cable (complete with contact pins, etc.)
-Sleeve the cable
-Modded it with the POM-Top
-Tested it, and it worked great!

Work and finished result pictures, it is a bit dark when I was working around 2-3:00 in the morning ... then i would not wake everyone in the house so i used a desktoplamp.









Sleevetime, this is my technique at Sleeving with Paracord!









I also had time to change all the O-rings in my fittings and my latest addition from Bitspower .... yes this is just a difference of how it looks, was much nicer with Black Stealh look!

[kskz_91]

Now I've finally got some time left to make an update to the people

But before I show you something I want to throw up two pictures of Isoprypanolburken I got me away from Arthur, and something I bought my way home from work at Kjell & CO(swedish allround electronic store)





1.8mm 6-7000K Vwhite LED




What I did is that I have had time to finish the whole pump, what is done with it is;
-Soldered of the original cables
-Soldered on a new 3pin cable (complete with contact pins, etc.)
-Sleeve the cable
-Modded it with the POM-Top
-Tested it, and it worked great!

Work and finished result pictures, it is a bit dark when I was working around 2-3:00 in the morning ... then i would not wake everyone in the house so i used a desktoplamp.









Sleevetime, this is my technique at Sleeving with Paracord!









I also had time to change all the O-rings in my fittings and my latest addition from Bitspower .... yes this is just a difference of how it looks, was much nicer with Black Stealh look!

[kskz_91]

I will now post a quite late update from my last contribution that Arthur sent me a nice little bag, I bought some needed things to make that extra touch for the overall looks
This package contained:
-1x EK GTX470 Backplate, Black
-1x EK Easy Mount, Black
-2x Alpha Cool 90 * Adapter, Black

















An photo that was pretty well, but with the wrong white balance

[kskz_91]

I have some very good news for the peaople!

Patriots wanted to be with and help me with the project and sponsor me with a Pyro 120GB Sata III SSD, the power of the SSD will raise the system to a completely different level of performance!

Thank you Sabine for all you help!
Visit and like Patriot on Facebook!

[kskz_91]

Time for an update to the patriotic people ... or what do you say?
My mother called me at work to a post office had come home with a small and lightweight package ... my thoughts to this was totally unexpected ... I sat long on what the hell was able to come to me at this time ...Was it from BitsPower or Lamptron? I asked my mom to open and she said it was a "pyromaniac something" ... I laughed, obviously quite high and I did know exactly what had arrived ... my Patriot PyroII SataIII (6GB / s) SSD had arrived barely 20 hours after the sponsorship deal! Talk about fast first class delivery!

Less nagging and lot of pictures, can not say more that it has a very seductive look and subtle details that go the extra mile.



























Once I wait for my package, it has fallen in a bit sleevingjobs, it can be nice to train your fingers now and then :P this is what I have had time for so far

[kskz_91]

Now it's finally time for an update, I was quickly take some photos before you should throw himself into bed ... I'm completely f***ing exhausted after today's work, i have been like damn tired all day :/... But now I will make this long awaited update for you guys ....which also has done so I can finally start putting the dremel into the case! "Hurr-array"!

I simply must thank Adrian from "Special Tech" because he shows interest in my project by sponsoring me with these delights!;
1x Hardware Labs Black Ice® GT Stealth 120mm Single X Flow Radiator Black
1x Hardware Labs Black Ice® GT Stealth 240mm XFLOW Radiator
1x 500 x 500 x 1mm Brushed Aluminium Panel : Gold
4x Neoprene Rubber Edging Trim (1m)
1x Tubing Cutter
1x 500ml Squeezy Bottle for filling Watercooling Systems
1x Koolance 1/4" Thread Male to Male Coupling Adapter Black
1x Bitspower Mesh Radgard 240 Dual Radiator Grill Black
1x Bitspower 1/4" Thread Universal T Fittings Matt Black











I found some gold!...I'm rich !



U-channel and the hosecutter



The rads...I'm in love again <3










Unfortunately, these items become lost or stolen when it was transported,you can se the large hole on the secont photo

1x Koolance 1/4" Thread Male to Male Coupling Adapter Black
1x Bitspower 1/4" Thread Universal T Fittings Matt Black

This is coming to me soon together with some replacements , Adrian is a great dude! Cheers!
1x Bitspower Mesh Radgard 240 Dual Radiator Grill Black

[kskz_91]

I received a message from Mick on the mayhem dye that my coolant for water cooling system is almost ready produced and tested!
It passed all tests so it is definitely not clump together, creating waste, stain tubes and watts blocks or lose color over time!
It will only be slightly darker in color as I wanted before shipping...

1L Chocolate Teptation Fluid - will be on its way to me as soon it gets ready, so far when they do not have much left.
They have recently produced their new Aurora (micro pearl) coolant in quantities and are ready for sale , Thats is an amazing coolant! You can all watch it in action at thier facebook group and Youtube channel.
I must wait of course for the rest of the coolant at a later date, as well as back-up liquid for a change or two
Talk about I FEEL HAPPY! That's pure custom, and i will be the only one with that fluid

Teaserpics from Mick on the color and texture: D
Thats real motherf *** king Chocolate!








Thanks again Mick and the Mayhems team!