Project: Chokolate Temptation

[kskz_91]

Right now I can't see any pic.

it works no brow , i had to upgrade to photobucket PRO works like a charm !

[kskz_91]

Informatic Update!

It was so that I went to the post office today because another pacage had recently came, but when I for some reason got the package it was not from Lamptron as i thought...it was from Enermax! I thought of course, WTF? This was supposed to be sent some while before Bequiet and here it is! Talk about slow shipping or that they somehow had forgotten in any way, but I thank Alexandra Kogan from Enermax so much for sending me some fans! She also sent me some candy too so soon there will be an update with some pictures that i have to take now
See yaah !

[kskz_91]

Now it's time for another picture update! I was expecting a package from Lamptron but instead i got one from Enermax, which was weird but fun, I should should not complain about that really
What I got sponsored by this time is:
2x Enermax 80mm TB Silence
2x Enermax TB Silence 120mm
2x Enermax TB Silence 140mm

Alexandra also sent me some accessories for me wich was great

Thank you for sponsoring Enermax!



It was a rather large package that contained the fans and accessories, the rest was a lot of plasticwrap , those packages are of course safe, but is it really neccesary?





Took e verything out from the box



The fans and content of its packaging, I was a little disappointed because I got the rubberskrews with my Magma fans and here they simply chose to skip them



A lot of photos of the fans ... I love the shape of the fan blades!







Too bad the140mm fans has no batwings, I do not really know how they've thought this out and why it has used out of their newer Appolish fan blades, too bad it cuts so much of the fan series, they should have done all the fan blades the same!







There is something weird going on here :dremel:





The Accessories; 4x Enermax Velcro Cable Ties, 2x Lanyards, 2x pens, 1x Write Block, 1x Card Metall Wallet

[UrbanSmooth]

Subbing in.

[kskz_91]

Subbing in.

You are welcome to folow me

[kskz_91]

Now they've finally woken up after a complete mess of hunger, I decked as soon as I got home yesterday so there was no update ... sorry about that. I will not write so much this time as it can get a lot of misspellings etc, so I simply go straight to the point this time.
Finally I got home my package from lamptron Yesterday at 10:15 time, delivered to my home by a good looking Schenker girl ... enough of that, I have also contacted Fractal Design about when my case arrives so I finally can get to start building sometime: 3

I thank Jinjin from Lamptron that is supporting me with the products for my project!



Inside the pacage there was:

1x Lamptron Touch Fan Controller
1x Lamptron Modding Tool Kit, Black Stainless Steel
2x Lamptron Flex Light Pro UV & RED

I will get some more white Flex lights and a suprise when they are in stock again


This time it will be just pictures...unfortunately, less nagging and more pictures bcaus I am very tired!









































Thats it for this time!
Happy Modding Everyone !

[kskz_91]

Now I have finally made up my mind on what paint I will use for my build! After mass a lot of hmm's and if's i finally decided for the BMW's New MARAKESH BRAUN,I just love how it changes in gold in the sunlight and that this paint is a pearl factor! Can not get better when it fits very well with the MDPC-X Copper Brown. Lots of pictures of the wonderful color that you deserve!












I hope you like it, I've also got hold of the paint code and it should be mixed when I paint the case, lucky us that we have access to all Standox colors and mixes, is damn nice to have our own painrack at the garage where we always do fresh mixed paints for our paintjobs.

Stayed tuned and don't forget to SUBSCRIBE !

[UrbanSmooth]

Nice.

[kskz_91]

Nice.

thank you!

[kskz_91]

Written Update

I have talked with Adriana at fractal design and she said that my case will be in about another 2 weeks late, we'll see if we can fix it from any dealer instead because I have been waiting terribly long, talk about bad timing: /

My twin brother was pretty jelaous of me now that i have started another new project so he will catch on and do his own ... he need small update and a new system, I think in order to modernize it a little bit "ReDoZz", so sometimes it will be some mixed pictures, you will easily find whose it is about when he will modify a define XL with pretty mutch watercoolingstuff, it will be fully packed ! he eavem goes good with sponsorship, can say that it pleases me! Good Luck Brow!
I will update as soon I have something new in my minds :dremel:

[kskz_91]

Now I cant reaqlly decide about the sleeve, it is that I have been looking around on some projects and psycosleeve how it looks and I'm quite unhappy...damn that it has to ruin my plans. It seems that the sleeve is more orange than it is brown and I can not believe that picture fooled me, until i saw the others...



I found something interesting when I googled today ... Paracord! Brown and nice ones, just the color I want and there and buy in Sweden. Has fallen a bit for this but I do not know how it will be when my sleeve with it ... I have seen a guy on extreme systems sleevingtopic where he sleeve an AX850 with green and black Paracord 550, and it looked pretty good, you can say ... time for some pictures.

Darkbrown Paracord





Lightbrown Paracord





Cremewhite Paracord

[kskz_91]

I have been sitting in photoshop in an x number of hours, I've Been thinking a lot back and forth and tried to select components that make everything can fit inside the case without any problems, this is a so-called puzzle brain a la Kosovar: P! I'm trying to position everything with real measurements I have taken from the Internet and all join in the slightest because I run with the grid in PS, what do you think then? Is it tough enough? I have one of those damned headache right now so I have to sleep for the night, seem keen to throw a comment and do not forget to subcribe!

[kskz_91]

I did a quick overview sketch with a 120mm Rad instead and I added some descriptions, now there is some more space into it !... isn't it?

[CharMz]

I love the chocolate sleeves, they will look beast

havent seen anyone do the brown chocolate before...you will be a genuine chocolate face

[kskz_91]

I love the chocolate sleeves, they will look beast

havent seen anyone do the brown chocolate before...you will be a genuine chocolate face

do you ??, haha i dont hope so :P

[kskz_91]

When was the last for a very long awaited update from Kosovo!
I finally got my Paracord yesterday and I have started a little bit with Sleeving, PSU is almost done anyway, it looks like it's just two of the 4-pin ATX connectors and the 24pin ATX left, it is damn was at night and the network is pretty tough when there are 6-7 computers on 0.5mbit -.-, for those of you who do not know how to sleeve with Paracord, let me just say that it comes up a Paracord-Sleeving guide on Sweclockers soon!

the first thing I did was I started with my sata to molex cable loop ...









Now I have cut away the extra touch that I do not need



They will be soldered like this!



Time to solder !













Then, the loop is finished, time to start Sleeving, but first ... cut the original sleeve!





I will begin with 6pin cables ... this is what I had in mind ... but I changed my mind later!





My package from knivbutik.se....











The Paracord 550...colordifferences



This Paracord contains seven pieces of threads that are interwoven in sets consisting of the 3 other threads ...


test sleeve a little and it went well ... however, so I did not know if I would run with or without heat shrink :/





I prepared more paracord pieces, as you can see I have taped as well marked on the tape where I'm going to cut ... this to Paracord not fry it very much to do, remove the wires and burn the edges of paracorde with the tape on, when you done this you can remove the tape without any problems





I was for braids for a while ... but it will do it on another project , I want this to have a nice flow through the whole thing



I sleeved the 2x 6pin cables and my SATA molex cable!



the 6pins will sit like this into the graphic card...it will look totaly awsome !



'



It was this update, sorry for those poor pictures, only had access to a digital camera in low light and the images were not very good ...

[UrbanSmooth]

Nice work.

At the end of this build, you should feature the final project shots with various chocolate candies in and around the area.

[kskz_91]

Nice work.

At the end of this build, you should feature the final project shots with various chocolate candies in and around the area.

haha dont shout out my idéa :P...

[anachlores]

Sleeving looks nice, no snags or runs. Keep up the good work

[kskz_91]

Sleeving looks nice, no snags or runs. Keep up the good work

yes it sure does ! Thanks! dont forget to subscribe!

[kskz_91]

Teaser for tomorows uppdate.....





What do you think this is for ??? i can give you a clue "16A"

[kskz_91]

I promiced i early update today...but i was at some relatives all day today, better late than never...
Many good pictures and no babbeling, if you wounder something feel free to give me a comment !

















Better pics on the sleevejob sofar....

[Radeon92]

mmm the Paracord seems like a really good idea. So far, nice work dude.

Waiting next update!!

[kskz_91]

mmm the Paracord seems like a really good idea. So far, nice work dude.

Waiting next update!!

Yes it is a good idea, thanx dude!
dont forget to subscribe!

[kskz_91]

Hey everybody ... now I'm finally back on track!
Thanks to my twin brother (ReDoZz) who bought Photobucket Pro to me for a year so I can once again upload pictures to the people! You can also see all those other pictures now ... what can I say!
Thanks Brother!

Now I've finally had time to make some progress this evening / morning...first of all, it had to fix a gallery on Sweclockers, and then I started sleeving the PSU, got pretty far but at some point you have to sleep od course!

8pin CPU entirely done, however it shall obtain a new 8pin connector instead of a 4pin and 6pin....



Time for the 24pin cable, the funniest bit!



Halfway to the cables


I have to have an eye on all the cables, Sofar so good, the next bit is to prepare Paracord!



sorting out colors and fix the cables so they do not sit across each other ...



Precut paracordpieces...





Progsess do far with the 24pin cable, 4pin part is complete and the second coyote brown part aswell
That is all until now anyway, I will hopefully make it clear today later after I got some sleep, Then I will post some finished products pictures!