Liquid Cooling Case Gallery

**h20xide** · 07-17-2011, 05:50 AM

Its LittleDevil's case
http://www.performance-pcs.com/catal...8aa76a095385f6

**owikh84** · 07-17-2011, 06:31 AM

Originally Posted by Systemlord

What case is that owikh84? Surely isn't the TJ07, looks like you can fit three quad radiators (2 on bottom, 1 on top) in that massive beast!

sorry didn't update my siggy.
the case is LD PC-V8 inverted.
my wc is dual loop: 2 quad rads at the bottom to cool the CPU & RAM; 1 quad rad at the top to cool the GPUs.

PC specs:
- Intel Core i7 2600K Processor
- Gigabyte P67A UD7 B3 Motherboard (temporary) - MIVE-Z is on the way
- Corsair Dominator GT 2000MHz 8-9-8 2X2GB DDR3 DRAM
- 2X MSI nVidia GTX580 SLI Graphic Cards (GC) / GPU
- 2X Intel SSD X25-M 160GB Gen2 Solid State Drive in raid0 (SSD)
- WD Caviar Black 1TB SATA3 hard disk drive (HDD)
- Corsair AX1200W Power Supply Unit (PSU)
- LiteON 24x DVD-RW Writer
- LittleDevil PC V8 Inverted Casing + LianLi Alu case feet black
- Dell Ultrasharp 3008WFP LCD Monitor
- Logitech Z5500 Speaker
- Asus Xonar D2X Sound Card

Cooling gears:
EK Supreme HF Plexi-Nickel - CPU block
EK MIVE Plexi-Nickel WB - Mobo block (for the incoming MIVE-Z)
EK RAM Block for Corsair DomGT Plexi+Nickel
2x EK FC580 GTX+ - Plexi+Acetal - GC blocks
1X Feser TFC-480 Quad Radiator (for GPU cooling)
2X XSPC RX480 Quad Radiators (for CPU cooling)
2X Swiftech MCP655 Vario Pump with EK D5 Top POM
2X EK Multioption X2 250 Advanced Reservoir
Bitspower & Feser Compression Fittings mainly silver shinning 1/2" ID 3/4" OD
Primochill Clear Tubing 1/2" ID 3/4" OD
Primochill Blood Red Non Conductive coolant
16X Scythe GT 1850rpm fans
2X Aerocool Shark Devil Red 140mm fans

**tantric** · 07-17-2011, 03:44 PM

back of mobo tray:

recent build for a friend/client:
-CM HAF 932 reverse atx mod.
-i7 2600
-16GB Cosrsair Dominator GT
-Gigabyte P67 UD7
-Quadfire AMD 6990 GPU

barfastic · 07-17-2011, 10:43 PM

tantric... amzing...

That machine looks really nice!

mind showing us some mroe pictures?

**tantric** · 07-17-2011, 11:34 PM

^ thanks!

**disruptfam** · 07-18-2011, 12:40 AM

Nice tantric!!!

Come to aus build my pc k haha

**tantric** · 07-18-2011, 02:15 AM

Come to aus build my pc k haha

haha! i wish

**flybye444** · 07-18-2011, 06:44 PM

finally finished with this box IMG_3671.JPG IMG_3694.JPG

**RCG_Bex** · 07-19-2011, 12:54 AM

@Tantric - SUPER SMEXY! Loving it!

**imersa** · 07-19-2011, 04:20 AM

Such a nice case owikh84, well done with filling it up too ;D next, sr-2 please

**owikh84** · 07-19-2011, 02:49 PM

Originally Posted by imersa

Such a nice case owikh84, well done with filling it up too ;D next, sr-2 please

Thanks imersa!
SR-2 would have to wait till next year - LGA2011

**Sadasius** · 07-19-2011, 02:56 PM

@Tantric Very nice job and love the beautiful photos.

**dunway** · 07-19-2011, 07:12 PM

Originally Posted by owikh84

Thanks imersa!
SR-2 would have to wait till next year - LGA2011

I have to ask, I'm dying to know... is that you in your avatar? and please give us a ballpark figure on how much your parents spent on your build?

**owikh84** · 07-19-2011, 08:02 PM

Originally Posted by dunway

I have to ask, I'm dying to know... is that you in your avatar? and please give us a ballpark figure on how much your parents spent on your build?

TBH the avatar is grabbed from net thus it is not me.
Total damage for the whole rig including monitor & those RAMs is at least $10k USD.

**matt220** · 07-19-2011, 08:34 PM

tantric, that is some nice work there!

**Malik** · 07-20-2011, 11:25 AM

the end of project is near ...

**josk1** · 07-21-2011, 03:33 AM

Malik don't you have dust in your house ???
every picture i've seen from all of your builds is soooo clean! how do you do that?
nice rig by the way

**9joker6** · 07-21-2011, 04:05 AM

Originally Posted by josk1

Malik don't you have dust in your house ???
every picture i've seen from all of your builds is soooo clean! how do you do that?
nice rig by the way

I think he use the gloves for touching components, and a compressor for the dust lol

**Avathar77** · 07-21-2011, 05:03 AM

Is it ok to fit the EK Supreme HF 90 degrees clockwise (or even 180?) like the photo above?
Just asking this because it would make tube routing much easier in my case, I am sure I have seen some where saying otherwise!

**c22** · 07-21-2011, 05:06 AM

Please don't tell me you can't see his pictures are being photoshoped

It's very easy to see if it was edited or not, don't you think?

**imersa** · 07-21-2011, 06:06 AM

Originally Posted by owikh84

Thanks imersa!
SR-2 would have to wait till next year - LGA2011

Any time man! I just got my SR-2 and the rest of the gear a few weeks ago. Building it up on a test bench as we speak.. but it's literally if it all connects and turns on I'm happy regardless.. Not worth of the Gallery

**~~emoners~~** · 07-21-2011, 07:30 AM

@tantric: amazing attention to details mhike!

by the way, what's that "NZXT-thing" at the back?

**tantric** · 07-21-2011, 03:14 PM

thanks all!

@emoners: it's an nzxt sentry LXE fan controller. the pcb is actually a pci mounted fan header. instead of mounting it on a regular pci slot. i relocated it on the back of the mobo tray to hide the cable clutter

**Retrolock** · 07-21-2011, 07:35 PM

Great work as always Tantric! Awesome shots too!

Tacs here of tpc

**FaYt** · 07-21-2011, 10:05 PM

Just finished off my first project

But where are my pics :O

Thread: Liquid Cooling Case Gallery

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions