SSD Write Endurance 25nm Vs 34nm

[Ao1]

So how do I clear throttling from the V2 I used in his experiment? I have SE's numerous times and its only idling that does anything.

Also I wrote 30TB in one sitting

SF vendors should come out and make a clear statement on exactly what throttling measures have been applied and what the impact will be.
It should be a clear specification on the product.

[bulanula]

SF vendors should come out and make a clear statement on exactly what throttling measures have been applied and what the impact will be.
It should be a clear specification on the product.

Would like to see this as well for the sake of transparency !

[Computurd]

[Note: I find your rather unusual method of trying to quote someone by adding your own red colored text to the quote extremely confusing and difficult to read. I had to check back a couple of times to make sure that Ao1 himself had not actually written what you wrote. There is a quote tag for a reason you know. Even italics would be easier to read than text color changes.]

actually i quite like it. and might even steal the method and use it myself

@AO1...hey i recall that....seems that we based a good drive temp from that document to be 30-40C , i still set the curve on my fans on my HDD to never allow them to go over 40C because of that document. Even though the conclusion was that it didnt have a huge impact on performance, you can see in figure 4 that the best range for lowest failure is 30-40C. that is still widely held knowledge. google does us a great service releasing data like this!

[johnw]

actually i quite like it. and might even steal the method and use it myself

I did not even realize he had inserted his reply in that long quote until someone pointed it out.

So feel free to use the technique. I'll probably miss your replies, too!

By the way, I'd say the safe range is more like 25-50C from that graph, although the error bars are large over 45C, so it might be better to set the upper limit at 45C, then to make it almost symmetrical, the lower limit would need to be like 30C. So 30-45C.