yes but when you pick on the pic should link u to imageshack to see it bigger G, it happening to all of us that its autorezided to that but at least if you pick on the screen will send you to imgshack and see it bigger
btw very nice chip !
cheers
Sergio
as for this 2500k it is nice, 5100 stable with 1.44 and 140glfops, I wish my GTX 580 clocked as good as this chip
Uploaded with ImageShack.us
Last edited by l0ud_sil3nc3; 06-15-2011 at 01:15 PM.
Last edited by cole2109; 06-15-2011 at 02:30 PM.
-Intel 3770K,
-Gigabyte Z77 UD5H,
-Gigabyte GTX 680 SLI,
-16gb Corsair Vengeance,
-SSD 128gb Kingston, 2×1TB Samsung F3,
-Corsair 1000W
-Z-5500@XONAR HDAV 1.3 DELUXE
No need for bigger case. Lower card has 5°C less.
-Intel 3770K,
-Gigabyte Z77 UD5H,
-Gigabyte GTX 680 SLI,
-16gb Corsair Vengeance,
-SSD 128gb Kingston, 2×1TB Samsung F3,
-Corsair 1000W
-Z-5500@XONAR HDAV 1.3 DELUXE
guys a quick question i was offered a brand new EVGA 580 vanila 1.065 vid from a friend that he didnt event tested it as he saw vid and he got mad and took it out...i cant find any good info on a GTX580 of this vid...mines are 1v and clock awesome that one could clock at least 900 ?
cheers all
Sergio
1.065vid above 900 is cherry on top of the cake
I'm surprised that the PSU can support such heavy OC. How did you connect the graphics cards to the rails? HX1000 is said to be essentially a pair of 500W PSUs, and the GTX580 sharing the same +12V rail with the CPU would likely suffer from power shortage if the +12 rail cannot overload to 600W 42Amps. My own HX1000 failed to power up a pair of EVGA GTX580 1.5GB about 6 months ago, even when I didn't overclock those GTX580s at all. The one sharing the same +12V rail with the CPU simply got blown. I've found several cases on the internet so I'm not alone with this problem, and this is why I eventually went for AX1200 for single rail.
Last edited by sniper_sung; 06-16-2011 at 05:16 PM.
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
THX Sergio. i think there is a little more space to go up more, but curr. the ambient temp is around 26,5°, so i´ve to wait for some cooler daysalso have to find another sandy.. this one is only 53x
max GPU temp after bench have been 40°.
Last edited by Sauron_Vie; 06-18-2011 at 04:38 PM.
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
yep, during the bench i have one scythe ultra kaze in front of the card and another beside.. keeping so the mem cool.
yea, it is hard to find a great SB clocker with 55 or 56 multi. had a 54x before but this one died with the board.(asus pro had a short circuit) so maybe a will get a better one from the RMA.
thx again and cheers
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
nice 1050 clock Sauron_Vieget another one and sli
---
those of you on sandy bridge+580 sli what are you guys getting in bfbc2 ?
reading thru the bf3 thread got me to load up bc2.. still very purdy
heres my clocks/settings
i7 980x @ 4.86ghz
580 sli (2x) @ 1000/2300
hq ambient occlusion
2x sgssaa
-3 lod bias
1080p
40 pix album: http://imageshack.us/g/87/42625009.png/
thx guysyup, i´am thinking about getting a second card and go for sli then, but first i´ve to find a better cpu. 53x can´t be the end
keep pushing guys
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
Sauron_Vie
imho you have bad efficiency (for clocks you have set)
I have 8600+ marks @ 1010 GPU/1200 mem with 5.5GHz 2600K
Work on it...![]()
my RIG is SICK!!!
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
Drivers 275.33, Win7 X64
my RIG is SICK!!!
ok, there is the diff... i´am on the same driver but on my good old vista x64 for 24/7...![]()
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
much improved performance after mobo power management adjustment
i7 980x @ 4.86ghz
580 sli (2x) @ 1012/2300
hq ambient occlusion
4x aa
8x sgss
16x af
hq texture filtering
-3 lod bias
1080p
50x bfbc2 pix: http://imageshack.us/g/857/30010507.png/
crysis2 @ dx11+hirez textures next week![]()
Bookmarks