Quote Originally Posted by Nw0rb View Post
@ Ket or anyone that can help... I just tested my Pcie2 and 4 which are supposed to run at 16x. So heres the problem i have a single 5770 and when run in the pcie2 slot runs 16x fine but when i move it down to 4 because 2 is way to close to my heatsink pcie4 which is alos supposed to run 16x only runs as 8x im very confused and kinda upset about this

Welp just read that pcie4 only does 8x only that makes no sense can someone explain
Both the Extreme4 and Extreme6 have a PLX chip which adds extra PCI-E lanes without too much latency, but there is still some limitation. AFAIK if using 3 graphics cards the configuration will be 8x8x4. Leaving a few lanes free for any other devices connected to PCI-E 1x slots or running through/on the PCI-E bus such as onboard audio might do.

Quote Originally Posted by bat4 View Post
I have tested the new driver and I have to say it is excellent.
The following devices work correctly:
-Technotrend USB2 S-2400 satellite TV tuner,
-Technotrend USB2 S2-3600 satellite TV tuner,
-Technotrend USB2 S2-3650 satellite TV tuner,
-Nokia E52 phone.

(My Logitech C905 webcam has worked perfectly since driver version 0.98.)

The only device which has failed the test it is the one equipped with the famous JMicron chip:
Silicon Power Armor A80 USB 3.0 HDD (with JMicron JMS539 chip)
I tend to believe this is due to design flaws in the JMicron chip.
I have replaced this enclosure with another having an ASMedia chipset, which works flawlessly.

I have to thank to EtronTech, Asrock and to you Ket for your help.