DD Double Wide Tower - 21 White Series Edition[Custom]

[F3L1X]

did you find out whether waterblocks fit that inno3d gtx 580?


i was wondering the same

[QuadSLI]

did you find out whether waterblocks fit that inno3d gtx 580?


i was wondering the same

Yes, it does fit the Inno3D GTX580 3Gb, so as for the EVGA GTX580 3Gb as well i assume..

[QuadSLI]

Will these look geat on the front panel...

[QuadSLI]

IN hand Modular Enermax Maxrevo 1350W

[barfastic]

nice psu! Quick question, are the ATX 24pin 1 to 1? what i mean is, does the 1st pin that plugs into the psu, go into the 1st pin on the atx24 mobo connector? 2nd pin to 2nd pin, so on and so on?

[QuadSLI]

nice psu! Quick question, are the ATX 24pin 1 to 1? what i mean is, does the 1st pin that plugs into the psu, go into the 1st pin on the atx24 mobo connector? 2nd pin to 2nd pin, so on and so on?

Nope !

First of all, the connectors on the PSU were difference design, so aftermarket ready made cable will not work without modding.

ATX+CPU: Only 20pins and share the rest 4pins from another 16pins port into 24pin and 8pins, Most were 1to1 except a 2to3



PCI-E: 12pins to 6+2 , 6+2 , contains 2 set of 3to5



CPU2 : 12 to 8+4 . 1to1
Molex: 5 to 4 , 1to1
Sata: 5 to 5, 1to1

I have ordered bunch of BitFenix cable just to get those solid white connector..



Headache!!
Any member here wanna do some sleeving?

[barfastic]

wow.... thats confusing as SHIZNIT!
good luck with that man hope everything works out for you!

[Vinas]

The bitfenix look nice. There was another build around here that used those extensions instead of modding the PSU.

In my opinion it is better to use the extensions and cable manage it so that you can't see the regular connectors.

Keep up the good work!

[QuadSLI]

Been held back by the EK Nickel thing..

img1268p.jpg
img1271ld.jpg
img1269ft.jpg
img1270r.jpg

[DarthBeavis]

I would have front panel recut in white

[Saltire]

I would have front panel recut in white

+1

Loving the build so far... I dread to think how much you've spent so far.

[QuadSLI]

I would have front panel recut in white

You referring to my case front panel? It is white but now i look at it kinda of outdated..

[UrbanSmooth]

This build reminds me of my build (3 x 3 radiator front). My hat's off to you, sir!

[QuadSLI]

This build reminds me of my build (3 x 3 radiator front). My hat's off to you, sir!

Nice build you got there.. Black/ Blue was my other favourite.

[LLiH]

How are those White Twister Clusters compared to the Scythe GTs for radiators?

[QuadSLI]

How are those White Twister Clusters compared to the Scythe GTs for radiators?

The Cluster only offer 1150rpm while the GT offering full range from 800 -2000 something like that.
From what i have read, GT dominated in every category..

I choose Cluster simply because the look and yet quiet low rpm and of course white LED

[QuadSLI]

Aug 6, 11
I am back!

I decided to get another aquaero LT to control all the fans and 2 pump pwm control port now. Just received the long out of stock AQ block.


Cool Mouse !




WORK LOG

Aquaero Pro & Billet Switch


Corsair AX1200 White Sleeved


There the MO-RA3 hidden in the other compartment


EK HF CPU block & bracket covered in white carbon + EK MB Block + EK RAM




MCP35X + EK white top + Koolance Heatsink


TFC XChanger 360 White edition + DangerDen Res


EK FC580 + Blackplate


Full Shoots!! Ahw.. i suck in photoshooting... that it for now.. still waiting for few stuff to complete..

[Lu(ky]

Wow very nice, it looks like with the MO-RA3 you are unable to use a front right side radiator there? I wonder if it would fit in the roof of this build?

I have a question for you I keep seeing this mouse pop up on many different builds just wondering where did you buy it and is it used for CAD or something like that? I saw it on this build ----> H E R E

Looking good...
dsc00032oz.jpg

[QuadSLI]

Wow very nice, it looks like with the MO-RA3 you are unable to use a front right side radiator there? I wonder if it would fit in the roof of this build?

I have a question for you I keep seeing this mouse pop up on many different builds just wondering where did you buy it and is it used for CAD or something like that? I saw it on this build ----> H E R E

Looking good...
dsc00032oz.jpg

I can still barely fit a BlackIce Stealth at the right compartment front and back. Yes you can fit any 120.3 , 140.3 or 120.4 if no disc driver at the roof but i didnt ask for mount hole.. tho.

Its just a nice looking adjustable gaming mouse.. but the shape are awful..

[DarthBeavis]

looks much better all white. I would paint the PSU as well . . .peel the stickers off the fans perhaps. The front does not look as good with just one set of fans on the rad - push/pull would look way cleaner. Maybe some white fan grills as well. Check out MNPCTech

[QuadSLI]

Ya, exactly.. i didnt mount the front rad yet... i need a new one , that one in picture was totaled since i flushed it with vinegar and failed...

[DarthBeavis]

looks like you might not have room with two pumps on the bottom. I love it all so far though. Danger Den has a white case at the last PDXLAN.

[UrbanSmooth]

Time to plump!

[QuadSLI]

looks like you might not have room with two pumps on the bottom. I love it all so far though. Danger Den has a white case at the last PDXLAN.

You are correct..haha..
I was thinking mounting them to the rad fans but couldnt find a bracket for DDC .... the UN bracket might work but i dont like it.
Also may be the HD cage below PSU..

[QuadSLI]

The replacement 360 Rad came in today... cant wait to power it on..