-
I get 1.260v under full load on my 2600k at 4.5 ghz. I agree that's a good vcore.. 1.335v is high for idle, though, with LLC1 without offsets I get 1.284v idle. You should be able to get an idle lower than 1.335 easily...try using LLC1 (LLC enabled if its only disabled or enabled). That should significantly lower your idle voltage with dvid.
Last edited by Falkentyne; 05-26-2011 at 01:56 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks