Quote Originally Posted by BeepBeep2 View Post
Particle there are issues I have with this list...

For example a post like Daveburts...(not to pick on him, it was just there)
He has 1.45v set, idles at 1.452, and in second screen 1.464, chances are load is at least 1.476-1.488v in CPU-Z and upwards of 1.49v on the DMM.

I can post 4.1 stable set at 1.43-1.44v, and 4 Ghz stable at "1.39v" and CPUNB at 3 Ghz at 1.33v if we all went that way.

My CPU doesnt even do 4.2 stable AFAIK most of the time I crash around an hour.

I'm not a believer in long stability tests especially at high volts considering my M4A89TD only has a 6+2 (doubled 3+1) phase setup. My mosfets are up in 95-100c range with just 4 Ghz/1.4v.

Typcally anything over 4 hours is overkill as well, all you will have past 4 hours is a CPU failing because of heat (unrealistic unless you run WCG) or a board failure.

I'd gladly run 4 hours, maybe 6-7 if I start it when I go to bed and turn it off or see what went up when I wake up...but I normally will not go for a 4.2 Ghz stable run at "1.51v" (1.54 real) load and not watch it.
You have a good point on Vcore...my last submission here was with Bios Value and if you look at ss, voltage is 0.04v lower...

As for stability, my last is also 8hr prime, which finally seemed not to be rock stable....something wrong with my IMC maybe, i don't know, but it could not be revealed even with 8hr prime stress...