Project White

[Snelleedie]

Thanks Oranuro

Here is Update 10

My first set of copper pipes are ready.^^
And they fit perfect i also placed the PSU on its place to loot at the cable management.
Here are some pictures.

I placed the old Motherboard on the tray so i can place my HD 6970 to fit the pipes.

Taking care of the HD 6970 so i can place the water block on it.


When i removed the stock cooler is saw this on the power connector.



The first 2 pipes are ready :p






Then i also checked for the power cables and it looks pretty good.

Now i need to wait for my order from Highflow so i can finish my loop with copper pipes.


Sponsored by Highflow


Completed Builds
Project Umbrella
Black Obsession

[-Whiteroom-]

Very nice work! I like this a lot.

[guilleguillaume]

This is going to look fantastic.

I think this is going to be a nice looking TJ07 with those modded case parts and those copper tubes.

[Snelleedie]

Thx guys ^^

Update 11

This week and weekend i finished of some pieces.
The Mid plate, bay holders and a extra plate on the back of the motherboard tray for cable management
I didn't take a lot of pictures of all the work because my GF had taken the camera to go to the sea with here Friend
So u only get the end result of it
Here are the finished bay holders



Completed the mid plate


Made a hole so that the fan of the HDD can pull some fresh air from the button of the case


then a made a extra plate for my cable management behind the motherboard tray to keep all the cables at there places.




made mounting holes for the rad mount and placed everything back together




The black fans will be changed with white fans from silverstone.




A few more thing i can do when that is finished i will have to wait for my order.
Common Aqua Computer speed up the production :p

Sponsored by Highflow


Completed Builds
Project Umbrella
Black Obsession

[Sealarn]

It really looks amazing!
Are you going to paint the copper tubes?

[skeyo]

Epic TJ build. I like copper tubes a lot.

[supernothing]

any chance of painting the copper tube white? awesome build, sir.

[Snelleedie]

It really looks amazing!
Are you going to paint the copper tubes?

any chance of painting the copper tube white? awesome build, sir.

Thanks the copper pipes will get a coat of nickel so it matches with the rest of my work.

Epic TJ build. I like copper tubes a lot.

Thanks man

Sponsored by Highflow


Completed Builds
Project Umbrella
Black Obsession

[Blu3berrX]

This is awesome. Keep going

[Wookie Man]

I love this, it is all kinds of sexy man!

[Snelleedie]

This is awesome. Keep going

I love this, it is all kinds of sexy man!

Thanks guys ^^

Hardware Update :p

Today they mail man came with a new package from Highflow^^
I show u guys what was in the box.

What did i get.
5 Silverstone 120MM FM121 Silver Controller 2400RPM

1 Koolance CPU-370



1 Aqua-Computer (electronic) Flow Meter (spijtig dat die niet in het wit is zal hier nog iets op moeten vinden.)

Then also some fittings rubber sealings power connectors temp meter

And also a
Aqua-Computer Aquaero 5 XT USB fan controller, graphic LCD, touch control, IR




And i got some new bolt to put everything together

Now i can start with the pump and flow meter mounting plate Still need to draws and make it.
But there are allot of other thing to do now also with my parts

Sponsored by Highflow


Completed Builds
Project Umbrella
Black Obsession

[mojosephwu]

why didn't you go with a hale90 power supply instead of the 850 hx? lol hale90 is white XD

[Snelleedie]

why didn't you go with a hale90 power supply instead of the 850 hx? lol hale90 is white XD

prefer Corsair over NZXT


Update 12
After a few days of playing with the Aquaero XT5 it is time to put my attention back on the case.
this weekend i have made the pump stand.
I couldn't really find a good design for it. I also wanted to make sure that the vibration from the pump wont go on to the case.
Here some pictures of the stands
Few weeks ago i bought these rubbers for the vibration. (first pictures are black and white GF borrowed the cam :s)

First time i bended the plexiglass so i tried on a spare piece.


It went well so i started with the good parts.
I made 2 different stand to see what would be best fitted.
Stand 1






Stand 2






Tested them in the case to see what would fit the best.




Tbh i prefer the stand 1 even that it doesn't have the same features as the case parts.
Well maybe a make a other 1 if cant get out of it.
also did a very small mid on the silverstone fans

And i did the power cables of the fans also to connect to the Aquaero


Just need to make a cover for the back of it else u will see the mes with the wires

Tonight i will brake my pc off so i can send my motherboard to the shop so i can get the B3 version of it.
Lol i almost forgot to show u my first idea :p of the pump stand



Good that i didn't go further on that idea it really looks bad after the other one's

Sponsored by Highflow


Completed Builds
Project Umbrella
Black Obsession

[Snelleedie]

This night i tried a other design for my pump stand.
I combined the first 2 designs and make 1 piece is it ^^
Drawing it on my last piece of plexi glass so it have to be right.





placed the pump on the stand





This is it ^^

Sponsored by Highflow


Completed Builds
Project Umbrella
Black Obsession

[InCredible]

absolutely amazing...i wanted copper tubing for so long before but didnt have the resources to make it happen..looks great cant wait to see it with the nickel finish.

[miahallen]

Those pump mounts are so simple, yet look so good, I bet you could sell those for way more than material cost

[Church]

+1 to miahallen. Yes, with skills like this, imho you can get up there alongside (UN)design, iandh and murdermods if you ever wish so

[Snelleedie]

absolutely amazing...i wanted copper tubing for so long before but didnt have the resources to make it happen..looks great cant wait to see it with the nickel finish.

me also ^^

Those pump mounts are so simple, yet look so good, I bet you could sell those for way more than material cost

Haha who knows i probably give them away have no use of them

+1 to miahallen. Yes, with skills like this, imho you can get up there alongside (UN)design, iandh and murdermods if you ever wish so

Thanks Man ^^

[nismosd]

Amazing work....

[audioave10]

There is much forward-thinking in this design and when you are done...you will have a work of Art!

[Snelleedie]

Amazing work....

Thanks ^^

There is much forward-thinking in this design and when you are done...you will have a work of Art!

Well i am hoping the same that it would turn out like a piece of art :p

[zalbard]

Looks like a turret!
Nice job, very creative!

[Raiden]

More one that loves the pump stand.. but are you using 2 pumps together?

Seems like a 655 with a 350

Keep on this good modding

[Snelleedie]

Looks like a turret!
Nice job, very creative!

Yea i had that a lot ^^

More one that loves the pump stand.. but are you using 2 pumps together?

Seems like a 655 with a 350

Keep on this good modding

Its a 655 with a Aqua Computer Flow meter on it ^^

[Snelleedie]

Small preview