DD Double Wide Tower - 21 White Series Edition[Custom]

[QuadSLI]

DANGER DEN DOUBLE WIDE TOWER 21
WHITE SERIES EDITION
VER. MORA3 9x120


Haven't touch water-cooling for years since the acrylic top disaster destroyed my whole system included 2x 9800GX2.
Now i feel like to start a whole new silent system and being more carefully on blocks ...avoid acrylic tops especially!!
The whole system will be building around DangerDen Double Wide 21 SR Case. But in Custom Opal White acrylic instead of black[/FONT]

Hardware
CASE: DangerDen Double Wide 21 SR - White Series Edition [DD Custom]
MB: EVGA X58 Classified3
CPU: X5675
RAM: Corsair Dominator GT 6Gb DR3 2000
GPU: Inno3D GTX580 3Gb SLI
Audio: TBA
PSU: Corsair AX1200
ODD: BlueRay
Storage: Intel SSD 510
Sleeving: MDPC-X White
Display: APPLE 30' Cinema Display

Cooling
CPU Block: EK HF
GPU Block: EK-FC + Nickel Blackplate
MB Block: EK EVGA EK-FB Classified
RAM Block: EK-RAM
Pump: DDC 18W x 2
Top: EK DDC x 2
RAD: SINGLE LOOP ->Watercool MORA3 9x120 + TFC XCHANGER 360 White Edition
RES: Aquatube or DD-RAD-RES
Fan Controller: Aquacomputer Aquaero 5 + Aquaero LT Water-cooled
Flow Meter: Aquacomputer High Flow Sensor
Temp Sensor: Aquacomputer Inline
Fluid: FLUID XP+ Ghost
Case Fans: ENERMAX CLUSTER 120mm(10) 80mm(3)
RAD Fans: ENERMAX CLUSTER 120mm(18)
Fitting: 3/8" Comp Fitting + QR

DangerDen Case
May 24, 11
The case was installed in less than 30mins, i must say the quality and fitting was very good.
Since theres still some white acrylic leftover, i ordered an extra white front panel in case i want white after.








RADIATOR MORA3 9x120mm
May 25,11
Just test fitted the MORA3, the rad came with 4 standoff, i assume its for the case when you put fan between rad and panel, but the standoff was too short for that, now i must try to find a longer standoff or longer screws+adapter.
WHat! There's white version Mora.. Dammit..


HARDWARES
May 26,11
90% arrived !! Now have to decide on the Liquid, Fitting.

[dietje1908]

Subbed because I like white cases :-)
Good Luck !

[quattro_]

costume white DD case
can't wait to see it .

[Raiden]

White DD :0 I WANT ONE NOW HAHAHA

Pictures...

[QuadSLI]

costume white DD case
can't wait to see it .

Feel free to contact Debbie to cancel their holidays

White DD :0 I WANT ONE NOW HAHAHA
Pictures...

She promised me only one will be produce, you can beg for my approvel.

[QuadSLI]

Here's some of the hardware currently parked in my old MM case. Nice case but heavy, scew holes not line up very well, the backplate as well, need force to install MB with few screw left out, video card pain to install as well....not line up with MB..etc. Hope the newer production quality been fix on these issues.

Thats my re-entry Corsair H70 cooling kit. Yes, very safe but noisy as hell.

[ballzD33P]

man, i cant wait to see what this l00ks like...

any eta from debbie? she's a sweetheart, isnt she...

[Origin_Unknown]

subbed - this sounds nice

[QuadSLI]

man, i cant wait to see what this l00ks like...

any eta from debbie? she's a sweetheart, isnt she...

No idea on ETA, she saids the white acrylic in transit 3 days ago.. i guess production + shipping, roughly 2 weeks at least..

Yes, debbie was helpful thru the whole process with many of my custom requests..

[Vinas]

I freaking love that case.

subbed

[Beriphent]

The white acrylic sounds like it will look sweet. Quad, have you thought about what the color theme will be for the build, such as accent colors to the white or what type of sleeving/wire colors you will use? Project Saifu and Raiden's project pretty much showed me how beautiful these DD cases can turn out, so I'm looking forward to following this build!

[zalbard]

That's one fantastic looking case! Looking forward to the completed build!

[QuadSLI]

The white acrylic sounds like it will look sweet. Quad, have you thought about what the color theme will be for the build, such as accent colors to the white or what type of sleeving/wire colors you will use? Project Saifu and Raiden's project pretty much showed me how beautiful these DD cases can turn out, so I'm looking forward to following this build!

I am not sure at this moment, but all white sleeve ordered from MDPC-X.

Many white delrin/acetal !!!

Lots of white Leds !!!

Lots of Fans like 30 of them..

[Alexandr0s]

A white Double Wide? That will look awesome ! Will you be using red as the secondary color theme?

[QuadSLI]

A white Double Wide? That will look awesome ! Will you be using red as the secondary color theme?

Red with White should be interesting, but i have no red MB, just a FTW3, i will definitely try that when the X79 red EVGA came out..

[barfastic]

Subd! just because i like white cases

[QuadSLI]

MDPC-X SLEEVING

Parts are flying in from everywhere around the world...

MDCP-X

40m White 1/8
10m SATA

Free color sample...Nice
Funny Sketch....But seen this exact drawing many times.. i guess he ran out of idea from tons of orders..

[QuadSLI]

Enermax Cluster White Led PWM Fans

120mm x 28
80mm x 3

got the fan for approx. $14 each.. These fans were the best looking fan i ever seen; performance wise, i don't think they are idea for Rads.. i presume the pressure will be leaking from the side vent.

Since i am doing low rpm Push Pull, i don't really care..agree?

[DarthBeavis]

Enermax Cluster White Led PWM Fans

120mm x 28
80mm x 3

got the fan for approx. $14 each.. These fans were the best looking fan i ever seen; performance wise, i don't think they are idea for Rads.. i presume the pressure will be leaking from the side vent.

Since i am doing low rpm Push Pull, i don't really care..agree?

I have them in Holocon . . .
http://www.xtremesystems.org/forums/...d.php?t=269649

Wish I had thought of white acrylic. Can't wait to see your build!

[=[PULSAR]=]

I have enermax clusters on a 360 swiftech quiet power rad cooling a 980x(4.2ghz) and they work pretty well, temps between 45-50C loaded.

[QuadSLI]

I have them in Holocon . . .
http://www.xtremesystems.org/forums/...d.php?t=269649

Wish I had thought of white acrylic. Can't wait to see your build!

OF course i had studied yours, thats one hardcore build , im nowhere near that...

Comon, its time for some refresh in new black.. get some from Debbie...

BTW, please give comments/advice along the build...

[QuadSLI]

I have enermax clusters on a 360 swiftech quiet power rad cooling a 980x(4.2ghz) and they work pretty well, temps between 45-50C loaded.

I feel better now

Is that in Push/Pull? Pos+/ Neg- fan pressure ?

[DarthBeavis]

OF course i had studied yours, thats one hardcore build , im nowhere near that...

Comon, its time for some refresh in new black.. get some from Debbie...

You will surpass it bud. Just keep up a nice worklog for us please.

[QuadSLI]

You will surpass it bud. Just keep up a nice worklog for us please.

Hey DarthBeavis,

May i ask what liquid you were using in ur build? Fluid xp Ghost white or Ice Dragon Nano??

[QuadSLI]

AQUAERO 5 Controller

Another box arrived..

Aquaero 5 w/ Heatsink
Temp sensor
Flow meter

Now i have to figure out how to connect all these fans to the aquaero... 1 pwm already reserved for pump pwm signal.. 3 port left.. enough power..??