***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[andressergio]

Nice clocks and chip sergio.
Cant wait to get a better 2600K from a friend of mine.
As usual I will run Prime custom blend min FFT 128k 3200MB and latest LinX will surely narrow the distance to TJ Max.
suddenly Costa Rica batch is flooding into Malaysia I wouldn't hesitate to try my luck again.

yes i dont buy random i had really bad luck on them i wish you the best on that !

here the 5005 HT on 2133 C7 same volts LLC1 no need to touch anything but vdimm and PLL from my 5ghz template






cheers to all
Sergio

[the_real_7]

here owie didnt need anything extra to 4900 HT stable prime will go for 5000 HT 2133 now



cheers
Sergio

some excellent stuff here Sergio . . . good job

[jacek]

Something from my side. Nothing special but it's enough for me.
1.4V in idle.

[Eldonko]

My UD7 B3 is now dead, only lasted a few weeks. Doesnt power up, fans spin for half a second then it shuts down. Tried 2 CPUs, 2 PSUs, 2 kits of mem, 2 GPUs. Board is not getting power. Sucks, who knows how long an RMA will take

[jacek]

My motherboard yesterday was in a similar state. I took out the battery for a while and it works.

[Eldonko]

Tried that :/

[andressergio]

My UD7 B3 is now dead, only lasted a few weeks. Doesnt power up, fans spin for half a second then it shuts down. Tried 2 CPUs, 2 PSUs, 2 kits of mem, 2 GPUs. Board is not getting power. Sucks, who knows how long an RMA will take

oh no sorry to hear Eldonko that sux what happened ?

[andressergio]

Something from my side. Nothing special but it's enough for me.
1.4V in idle.

4800 is very nice mate

[andressergio]

some excellent stuff here Sergio . . . good job

thanks bud

[Eldonko]

Nothing that I know of. Board just stopped working for no apparent reason. Hope it wasnt bios F3 that killed it somehow, it worked fine with F3 for a week.

oh no sorry to hear Eldonko that sux what happened ?

[andressergio]

Nothing that I know of. Board just stopped working for no apparent reason. Hope it wasnt bios F3 that killed it somehow, it worked fine with F3 for a week.

i dont think bios but i went back to F3h and mine is B2 and as u can see im stable again after the non stable nightmare

wish you luck mate

[OC Nub]

Tried that :/

Thats exactly how my UD7 acted when it died. Fans spin for less than 1 sec and board shuts off, long cmos clear did nothing, different psu, cpu, mem nothing worked.

Im not sure how long the RMA process takes, Im still waiting for my new board. I shipped it out last monday.

[owikh84]

If can wait a lil bit swap for a Z68 guys, it's around the corner already.

[Eldonko]

Shoot that sucks, probably wont be the last UD7 that dies like this then. I registered for RMA today, I hope this will be fast.

Thats exactly how my UD7 acted when it died. Fans spin for less than 1 sec and board shuts off, long cmos clear did nothing, different psu, cpu, mem nothing worked.

Im not sure how long the RMA process takes, Im still waiting for my new board. I shipped it out last monday.

[zsamz_]

Shoot that sucks, probably wont be the last UD7 that dies like this then. I registered for RMA today, I hope this will be fast.

keep us posted

i cant even get my b2 board replaced

i wouldnt mind doin a simple rma then an exchange

[Falkentyne]

I hope my UD5 won't die like that. It's been just as stable (with F3g) as my P5wdh board before it. But then again I'm not using any fancy stuff...
(only blue screens are with the X-fi, starting Xtrap games occasionally...)

F3 final is less stable...(XP crashes on shutdown sometimes)

[andressergio]

I hope my UD5 won't die like that. It's been just as stable (with F3g) as my P5wdh board before it. But then again I'm not using any fancy stuff...
(only blue screens are with the X-fi, starting Xtrap games occasionally...)

F3 final is less stable...(XP crashes on shutdown sometimes)

yes F3 are unstable bios. go back i did to F3h and stable again, my friends on UD4 UD5 and UD7 reporting the same on last bios

cheers
Sergio

[H2lium]

Hi guys,

just stumbled upon this :

Z68-UD7 to be released pretty soon.

Now look at the box cover :



Looks like UEFI coming to Gigabyte at last (Touch BIOS).

Any chance to get UEFI on our P67A-UD7 boards? if not I would be super-pissed really.... :crazy:

[Eldonko]

I dont like UEFI myself lol. I suppose I just have to get used to it.

[Dumo]

I dont like UEFI myself lol. I suppose I just have to get used to it.

Sorry to hear bout the board Zac
Cpu is ok right?

[Devil_Dog]

What's the most stable bois right now. Board shipped with F2. I read that F3 still has some issues. Should I go with F3h?

Also, any word on how F4a is?

Thanks

[Eldonko]

CPU is good

Sorry to hear bout the board Zac
Cpu is ok right?

[jackbrennan2008]

I'm still awaiting my B3, but if it does die i'll just trash it and buy a Z68 motherboard. I hope Gigabyte continue to support the P67. I'll be extremely annoyed if they drop support only after a few months.

[andressergio]

What's the most stable bois right now. Board shipped with F2. I read that F3 still has some issues. Should I go with F3h?

Also, any word on how F4a is?

Thanks

use F3h mate dont use new ones

[andressergio]

5100 HT 2133 C7 on my same 5000 HT 2133 C7 stable prime

LOAD 1,428 IDLE 1.464



Cheers
Sergio