He was kind enough to upload it too
1902 -> http://www.mediafire.com/?gzkw847zeddfff6
He was kind enough to upload it too
1902 -> http://www.mediafire.com/?gzkw847zeddfff6
Cool
I'll flash it in a few.
There seems to be a tiny bit of improvement.
Before with turbo with win7-sp1 my fsb and such would droop a bit.
It's much better now, I haven't checked on load though yet.
Bios cmos profiles "are compatible" with 1304's.
Cpu ecc still doesn't work, no special ageas ver, this is a pre-bd bios.
I expect it to act alot like 1304, but it might be a wee bit better in some ways.
I think the bios date for the 1304 is 12/09/10.
And for this 1902, 02/17/11 if I remember right.
Thank you guys for this bios.
![]()
Last edited by NEOAethyr; 04-06-2011 at 03:06 AM.
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Yeap 3kNB is pretty managable on my 1090T too, with ~1.269 cpu_nb voltage @ 250 fsb
CIVF (3012) here, too
edit: I missed a digit there![]()
Last edited by Ccaution; 04-06-2011 at 04:24 AM.
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
At the moment, with the new bios that was just posted, I had to up my cpu-nb voltage because I got a hardlock.Code:Fsb: 250Mhz Cpu: 4x 1000Mhz ? 8x 2000Mhz ? 12x 3000Mhz ? 14x 3500Mhz -0.028125v Turbo: 16x 4000Mhz ? Vdda: 2.50000v Cpu-nb: 12x 3000Mhz +0.106250v (or +0.109375v) Ht: 12x 3000Mhz 1.2000v Mem: 8x 2000Mhz 1.6625v, 0.505x, 0.505x Pci-e: 150Mhz 1.11300v Nb: 1.1125v Pci: 1/3 50Mhz Isa: 1/2 25Mhz Dma: 1/2 12.5Mhz SB: 1.11300v Vddr: 1.20575v Nb-1.8v: 1.90200v 8-9-7-24-6-11-12-5 6-4-6-4-6-90ns-7.8ms-1t
I up'ed it to: +0.112500v, it hardlocked at the 109x setting I have listed above.
All of the above was verified on the 1304 bios.
8hrs of y cruncher
12hrs of prime95, custom fft's of 4096k.
S&m's mem test, normal length.
And a few hours of ghostbusters.
Oh and an hour of zombie killing in black ops.
I've got alot of games to check still.
The cpu and cpu-nb voltages are setup in offset mode, hence the - and +'s.
The cpu voltages for each multi I didn't fill in yet, only the main one which gets the main voltage applied to it, the turbo gets an extra 0.1v on top of that.
Aida64 says this, not sure if it's 100% correct:
CPU Voltage 1246875 V
CPU/NB Voltage 1237500 V
If it is correct, it means when I hit turbo mode, 4ghz, my voltage needed is 1.346875v.
My sub timings I left completely alone.
I can't say for sure, but just looking at the specs you posted, my guess is that there is 0 difference.
It's just the C7 set is binned.
The other 2 are the scrape.
Just my guess though.
Last edited by NEOAethyr; 04-06-2011 at 04:21 AM.
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Bookmarks