i5-2500K/2600K batch number and o/c results

[papatsonis]

Some of the L041Cxxx batch(s) have produced some nice clocking chips (even though there can be both strong and weak in each batch). Yours is the first I've seen ending with ...236 so I look forward to seeing your results.

finally the tests seem to end.. as i have multi limit 47x with PLL overvoltage disable



4000-> 1.140 5hrs 12k fft prime 26.5 all ram
4200-> 1.199 13hrs 12k fft prime 26.5 all ram
4400-> 1.248 15hrs 12k fft prime 26.5 all ram
4600-> 1.309 16hrs 12k fft prime 26.5 all ram
4700-> 1.341 3hrs and counting.. (hope to be stable at this setting)

(average voltage values taken from aida64 log file, during prime session)

the bad is i have to forget 5ghz.. with a 24/7 voltage setting
the good is as can be seen from the chart, has super linear scaling (in fact from 4200->4400 should need more vcore bump, maybe some component in core, needed a "headstart" in vcore to function properly? dunno), so hope will be bench-stable for short sessions on 5ghz (assuming it will keep linear, should need about 1.43-1.44 from the chart)