Quote Originally Posted by owikh84 View Post
My 2600K is not really a good chip though... What i'm trying to emphasize is that B3 is harder to clock and love more voltages than B2. Anyway here's my setting for 5.0 GHz

### MB Intelligent Tweaker ###

Advanced Frequency Settings:

CPU Clock Ratio .......................................[ 50

> Advanced CPU Core Features

CPU Clock Ratio .......................................[ 50
Internal CPU PLL Overvoltage...........................[ Enabled
Real Time Ratio Changes In OS .........................[ Disabled
Intel(R) Turbo Boost Tech .............................[ Disabled
Turbo Ratio (Core 1)...................................[ Auto
Turbo Ratio (Core 2)...................................[ Auto
Turbo Ratio (Core 3)...................................[ Auto
Turbo Ratio (Core 4)...................................[ Auto
Turbo Power Limit (Watts)..............................[ 300
Turbo Current Limit (Amps).............................[ 300
Spread Spectrum ........................................[ Disabled
CPU Cores Enabled ............................ ........[ All
CPU Multi Threading....................................[ Enabled
CPU Enhanced Halt (C1E) ...............................[ Disabled
C3/C6 State Support ...................................[ Disabled
CPU Thermal Monitor ...................................[ Disabled
CPU EIST Function .....................................[ Disabled
Bi-Directional PROCHOT ................................[ Disabled

BCLK/DMI/PEG Clock Control ............................[ Enabled
BCLK/DMI/PEG Frequency Control ........................[ 1002
System Memory Multiplier (SPD) ........................[ 21.33

Advanced Memory Settings:
System Memory Multiplier (SPD) ........................[ 21.33
Performance Enhance ...................................[ Extreme
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving ..................................[ Enabled
Rank Interleaving .....................................[ Enabled
7-10-7-27-CR1 others Auto

Advanced Voltage Control:
CPU
Load Line Calibration .................................[ Level 2
CPU Vcore .............................................[ 1.52
QPI/VTT Voltage 1.050v ................................[ Auto
System Agent Voltage 0.925v ...........................[ Auto
PCH Core 1.050v .......................................[ Auto
CPU PLL 1.800v ........................................[ Auto

DRAM
DRAM Voltage 1.500v ...................................[ 1.64
DRAM Vref 0.750v ......................................[ Auto
DRAM Termination 0.750v ...............................[ Auto
Ch-A Data VRef. 0.750v ................................[ Auto
Ch-B Data VRef. 0.750v ................................[ Auto
Ch-A Address VRef. 0.750v .............................[ Auto
Ch-B Address VRef. 0.750v .............................[ Auto

Miscellaneous Settings
Isochronous Support ...................................[ Disabled
Virtualization Technology .............................[ Disabled

And this was on B2 a few weeks ago...
B2
trying taking you vtt off auto and retrying you vcore settings with llc1 , you can get a mixed bag of results with your settings cause you vcore is jumping up with llc2 and you vtt is is on auto , that a really bad mix to have to get stable