It sounds like the B3 board solves a host of ills. Is that the case? I always thought there was more than SATA II issues on the recall.
P.S.
Can everyone post their CPU cooler when posting OC results. There is a big difference between the different water and air configurations; what works on one may be way out of reach on another.
'94 Supra TT 6-speed '04 S2000, '10 QX56
Past transport:
'00 S2000, '91 MR2 Turbo, '86 MR2, '81 Scirocco, '76 Alfetta, '70 Boss 302, '68 Lotus Elan S4
Some 4.7Ghz @ 1.35 testing on AIR with VenX
Asus P8P67 PRO B3 | Intel Core i5 2500K @ 4.6GHz | 4GB G.Skill Ripjaws X DDR3-2133MHz | OCZ Vertex 3 120GB Max IOPS | 2x 1.5TB WD Green
1GB Asus Radeon HD 5850 | Thermalright Venomous X Push/Pull | Corsair HX750w | Corsair Obsidian 800D | Dell U2311H | Windows 7 Ultimate x64 SP1
i changed my ud4 with deluxe but now i have a problem. SLI not work?
edit: clean install fixed so windows sucks :P
Last edited by aytacaksel; 03-19-2011 at 05:18 AM.
Bios 1502 has hindered my high overclock and stabilty, i used to run on my Asus P8P67-Deluxe at 5600Mhz for benching and it was stable with Bios 1305 but since i upgraded Bios yesterday i have lost the ability to bench at 5600Mhz SB , now i have lost 100Mhz overnight as i can only bench stable at 5500Mhz now
Bios 1305 :
http://valid.canardpc.com/show_oc.php?id=1715259
By chispy at 2011-03-19
100% stable 2d Benching with Bios 1305 at 5600Mhz:
By chispy at 2011-03-19
Bios 1502:
Max i can bench 2D or 3D = 2core HT off or 4 Cores HT off now after upgrade to Bios 1502 its only 5500Mhz
By chispy at 2011-03-19
I upgraded to 1502 from 1305 on my P8P67 Pro and from what i have seen its more stable. Cant get 55x as before but 54x is rock solid through everything I have pcmark05 left to do but wprime 1024m ran. I need to spend more time with this setup really.Originally Posted by chispy
Bios 1502 has hindered my high overclock and stabilty
Bios 1305 :
http://valid.canardpc.com/show_oc.php?id=1715259
By chispy at 2011-03-19
100% stable 2d Benching with Bios 1305 at 5600Mhz:
By chispy at 2011-03-19
Bios 1502:
Max i can bench 2D or 3D = 2core HT off or 4 Cores HT off now after upgrade to Bios 1502 its only 5500Mhz
By chispy at 2011-03-19
Hey there,
i am looking for a P67 based motherboard at the moment and many publications and people i talk to state the Asus P8P67 is one of the best choices especially when u consider serious overclocking which i do.
But i am curious about a rumor that the P8P67 or maybe P67 in general are still suffering from the "Cold Boot Bug" which was very common among several (P35/P45) Boards in the past.
Can someone confirm if this still occurs with the P67 or maybe its just Asus related. If it is is there a workaround to get rid of it?
Less i have, the more i gain.
@chipsy. No issues here with the bios 1502, at least with running benches. The AIDA and CPU Z mainboard were an after thought.
KingZer0. I have not had any cold boot issues with mine since the first couple of bios revisions. My new B3 board has no boot issues so far.
Last edited by crossg; 03-19-2011 at 01:27 PM.
Rig 1
CPU: i7-990X. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS Rampage III Formula. RAM: 12GB Mushkin DDR3 1600 CL7. GFX: EVGA GTX 580's x 2. SLI. HDD's: 1.5 TB Seagate, 1TB WD Sata III. Monitor: Samsung 25". PSU: Corsair AX 1200W. Win 7 64 Bit
Rig 2.
CPU: i7-2600K. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS P8P67 Deluxe. RAM: 4 GB GSkill Ripjaws X DDR3 1600 CL6. GFX: EVGA GTX 580. HDD: 1TB WD Sata III. Monitor: Samsung 23". PSU: Corsair AX 1200W. Win 7 64 Bit.
Ok thank you for the feedback guys , (Maybe a Bad Mount on my Cascade) i will remount the Cascade tonite and bench again to see where i end up with. I will report back later.
@CrossG:
Nice work with the ripjaws ddr3 1600 overclock!
i7-2600k L041C108 4.8ghz 1.32v PLL offVenomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE@ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
2500k 4.7GHz @ 1.35 on AIR
19hr Prime95 Blend test
Asus P8P67 PRO B3 | Intel Core i5 2500K @ 4.6GHz | 4GB G.Skill Ripjaws X DDR3-2133MHz | OCZ Vertex 3 120GB Max IOPS | 2x 1.5TB WD Green
1GB Asus Radeon HD 5850 | Thermalright Venomous X Push/Pull | Corsair HX750w | Corsair Obsidian 800D | Dell U2311H | Windows 7 Ultimate x64 SP1
how are you guys keeping your OC speed in an idle state???? This is driving me crazy! I want my 4.8GHz all the time, not 1600 @ idle.. Please tell me the secret
Nothing anymore
deactivate c1e, speedstep, c3, c6 and so on...
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
@chipsy
I also had issues with my oc and the new 1502 bios, but once I hit the clear cmos jumber on my asus p67pro baord it seems to be as good or better than the 1253 bios. before I cleared the cmos it was junk and couldnt get past 4700. I also did leave the psu unpowered for a few minutes after clearing the cmos
that mean you will pay more for electricitynot realy need disable em
any workaround on the AI suite installation bug
i have tried the patch and it still crashes out.
on win7 64 sp1
so far tried the following applying the patch and rebooting in admin mode each time:
install off disk - instant crash
install the 'installall' off the disk - crashes but reboots the system anyway
install off the downloaded version - crashes instantly.
would really like to get a few of the utilities working. will email asus from work tomorrow, just wondered if anyone has had any luck?
≠ 4770K - R9 290X Crossfire
www.overclockers.co.uk
I installed off the disc with Win 7 64 bit. No problems with it at all. How are you guys getting those high Gflpos in LinX? I am testing a 4.5 and only see about 51.
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Everything is better when "Wet".
You can force the CPU to work at maximum clocks all the time by changing the non-Turbo multiplier, and still keep C1E/C3/C6 for some of the power savings.deactivate c1e, speedstep, c3, c6 and so on...
You need to install SP1 and get the latest LinX from zalbards 4.5 LinX stable club thread (first post) then if you want really high gflops turn off Hyperthreading in Bios.(max Stress too) You can also select 4 threads in Linx but the Gflops will not be as high and the temps will be a little lower.
Last edited by crossg; 03-20-2011 at 12:56 PM.
Rig 1
CPU: i7-990X. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS Rampage III Formula. RAM: 12GB Mushkin DDR3 1600 CL7. GFX: EVGA GTX 580's x 2. SLI. HDD's: 1.5 TB Seagate, 1TB WD Sata III. Monitor: Samsung 25". PSU: Corsair AX 1200W. Win 7 64 Bit
Rig 2.
CPU: i7-2600K. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS P8P67 Deluxe. RAM: 4 GB GSkill Ripjaws X DDR3 1600 CL6. GFX: EVGA GTX 580. HDD: 1TB WD Sata III. Monitor: Samsung 23". PSU: Corsair AX 1200W. Win 7 64 Bit.
Yup, is also a opportunity, but for benching he should deactivate all power savings, but it´s his choice
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
Thanks. I will give it a try.
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Everything is better when "Wet".
now im getting rather annoyed
new bios on this morning, tried to get 5ghz which is now out of the question at my current settings.
using offset voltages so that my vcore drops down in parallel with speedstep.
my prime stable 5ghz has disappeared into the ether
seems that my 8 hour prime run at 4.9 was stable...
[grabbed this screenshot before i went out today]
so i restart the computer to save the settings to a profile.
get into windows and it bsods straight away.
anyone else getting random stuff like this?
heres my bios settings for reference.
Last edited by rjkoneill; 03-20-2011 at 02:52 PM.
≠ 4770K - R9 290X Crossfire
www.overclockers.co.uk
does the new BIOS fix the offset voltage issues? for example, "auto" offset @ 45x multi = 1.436v, but with only +0.005v offset it goes to 1.368v. and minus offset is all kinds of screwed up too, there's no happy medium between minus and plus offsets.
anyways, I've managed to find a good 24/7 conservatively safe OC for summer temps and 24/7 folding.
4.5GHz 1.312v load (High LLC), all power management enabled. even the EPU, Optimized phases and T. Probe with VRM Spread Spectrum. super stable, but unfortunately 1.3v and lower aren't :/ I'm gonna see how much 4.6GHz requires to see if it's worth the bump, I'm thinking 1.35v since 4.7GHz needs 1.376v.
oh, and I still can't get my highest OC (4.8GHz) to work properly with offset voltage.
CPU: Intel Core i5 2500K (L041C123) {4.9GHz/1.43v|4.8GHz/1.4v|4.7GHz/1.38v|4.6GHz/1.35v|4.5GHz/1.31v}
Cooling: Corsair H50 push/pull
Mobo: Anus P8P67 Deluxe (B3)
RAM: G.Skill Ripjaws X 2133MHz 9-11-9-28-1T 1.66v 8GB (4GB x 2)
Video: EVGA NVidia GeForce GTX 580 @ 810/1630/2100 1.05V
PSU: Corsair AX850 Gold (Seasonic X)
Case: Lian-Li Armorsuit PC-P50R + Lian-Li Windowed Side Panel W-LM2AB-1
Mouse/KB: Logitech G700 | Microsoft Sidewinder X6
Monitor: NEC Multisync EA231WMi 23" E-IPS
on bios 1502 myself with the deluxe B2 board.. not got my B3 yet.
im 3D stable ( vantage , 06 , 03 , 05 ) at 5300mhz with 1.55vcore but i cant even run super pi 1m , i reboot instantly.. !!
no clue whats going on
Last edited by Toolius; 03-20-2011 at 03:01 PM.
Intel Core i7 3960x | 3x Intel Core i7 980x | 3x Intel Core i7 920 | 2x Intel Core i7 2600k | 2x AMD opteron 6282 SE | 3x Asus Rampage II Extreme | 2x Asus Rampage III Extreme | Asus Rampage IV Extreme | 1x Gigabyte X58A-UD7 | 2x Asus Maximus IV Extreme-Z | Asus KGPE-D16 | 3x 6GB DDR3 Corsair Dominator 1600 Cl7 | 1x Patriot Viper II 6GB 2000 Cl8 | 3x Corsair Hx1000 | 4x Corsair Ax 1200 | 3x Antec 1200 | 4x Corsair Obsidian 800D | 2x Intel 80Gb G2 SSD | 4x Kingston HyperX 120GB | 2x Vertex 2 120GB | 2xWD 150GB Velociraptor + 1x WD 300GB Velociraptor +5TB | Msi Nvidia Gtx 295 | Msi Ati 4870x2 OC Edition | 2x Msi Ati 4890 OC Editions| 2x Sapphire Ati 5870's| Sapphire 5970 OC Edition | 2x Msi Gtx 460 | 3x Sapphire 6970 | 3x Asus Gtx 580 | 3x Asus 7970
thats pretty much my summary there
offsets is screwed. would be good if they did it like the gigabyte AM3 boards where they show you the eventual vcore with the offset value taken into account.
either way im back on manual vcore settings which is a crying shame as i wanted it settling at 1v at idle.
im not having much luck with this board so far.
≠ 4770K - R9 290X Crossfire
www.overclockers.co.uk
Try setting Phase control to manual and set for ultra fast. Splave mentioned that a while back and seems to work for SPi runs.on bios 1502 myself with the deluxe B2 board.. not got my B3 yet.
im 3D stable ( vantage , 06 , 03 , 05 ) at 5300mhz with 1.55vcore but i cant even run super pi 1m , i reboot instantly.. !!
no clue whats going on
Rig 1
CPU: i7-990X. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS Rampage III Formula. RAM: 12GB Mushkin DDR3 1600 CL7. GFX: EVGA GTX 580's x 2. SLI. HDD's: 1.5 TB Seagate, 1TB WD Sata III. Monitor: Samsung 25". PSU: Corsair AX 1200W. Win 7 64 Bit
Rig 2.
CPU: i7-2600K. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS P8P67 Deluxe. RAM: 4 GB GSkill Ripjaws X DDR3 1600 CL6. GFX: EVGA GTX 580. HDD: 1TB WD Sata III. Monitor: Samsung 23". PSU: Corsair AX 1200W. Win 7 64 Bit.
Posting Permissions
Reply With Quote
Bookmarks