You can find it here... click (new link).Originally Posted by jcniest5
http://www.xtremesystems.org/forums/...&postcount=128
You can find it here... click (new link).
http://www.xtremesystems.org/forums/...&postcount=128
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
here u go:
http://91.121.148.119/downloads/BIOS...-ASUS-1298.ROM
sorry no changelog
SUCCESSFUL TRADE LIST RM600k+
^^ Malaysia's Overclocking Enthusiast Community Website ^^
Find us at Facebook HERE
XS Successful Trades:
G.Skill RipjawsZ 2400C9 4X4GB - sold to easegantini | G.Skill RipjawsX 2133C8 2X2GB - bought from Dumo | 2600K 57X - bought from newhit | 3770K 6750 - bought from Viss | 3770K 6750 - sold to Sniper | 3770K IMC 2800+ - bought from Dumo | G.Skill Pi 2200C7 - bought from websmile | 3770K IMC 2933+ - bought from Viss | DomGT 2kC7 3X2GB - sold to _AntLionBR_ | G.Skill Pi 2133C8 - bought from websmile | DomP 2800C11 - bought from Alex-Ro | Pi 2000C7 - bought from websmile | GTX4 + KVR 1333C9 - bought from TaPaKaH
Thanks a lot! Hey, before I flash mine, does it OC any better than 1101, same, or worse? Any known issues fixed by this version?
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
After flashing 1298 i got the Postcode F1 ?
www.ocaholic.ch
F1 says: Recovery condition triggered by user.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
thank's !
But what i have to do ?
www.ocaholic.ch
you can't be scared when you have aty batch
I have a 2500k that needs 1.46 for 4.8 for complete stability, it is epic fail on many levels
I too have noticed increased instability when vccio is higher than 1.1 on most of my cpu's so you are definitely not the only one
whats the deal with how long this board takes to boot XP! It scrolls like 5 times before it loads ftl
I don't have any problems with XP, it boots very fast
It was probably a failed flash and BIOS was recovered. What program did you to use to flash? I use EZ Flash (98% of the time ) within the BIOS to do all my flash jobs...
Does anyone know why there isn't an Offset option for vcore on the M4E? It's set to Manual but it's also grayed out so I can't pick it. Maybe there is a back-door way, but I don't really know.
Last edited by jcniest5; 03-19-2011 at 02:04 PM.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
Can someone help me getting past the freeze at Windows 7 startup? It freezes at the time Window logo (four-color logo coming together). It only does this when I choose 51x or higher. Also, can someone give a rundown of the settings in the EFI BIOS so I can duplicate? Sorry to sound so newbie. Thanks....
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
LMAO....happens on my board too.
It's probably initializing something.
That also happened on my P5WDH.
It's not reading from the HDD during that time, right?
Try enabling CPU PLL Overvoltage
SUCCESSFUL TRADE LIST RM600k+
^^ Malaysia's Overclocking Enthusiast Community Website ^^
Find us at Facebook HERE
XS Successful Trades:
G.Skill RipjawsZ 2400C9 4X4GB - sold to easegantini | G.Skill RipjawsX 2133C8 2X2GB - bought from Dumo | 2600K 57X - bought from newhit | 3770K 6750 - bought from Viss | 3770K 6750 - sold to Sniper | 3770K IMC 2800+ - bought from Dumo | G.Skill Pi 2200C7 - bought from websmile | 3770K IMC 2933+ - bought from Viss | DomGT 2kC7 3X2GB - sold to _AntLionBR_ | G.Skill Pi 2133C8 - bought from websmile | DomP 2800C11 - bought from Alex-Ro | Pi 2000C7 - bought from websmile | GTX4 + KVR 1333C9 - bought from TaPaKaH
I just got XP running on it and I noticed the same thing too, the rog splash screen appears and then reappears three times before it boots XP.
so my efficiency blows hard on 32m, I am pretty sure it is the secondary timings.
cas 7
vs
cas 8
That has always been Enabled when I do any OCing. Still no luck. Anything else I may have missed?
Under Digi + VRM (click on it, another screen pops up), what kind of setting to use for that whole screen top to bottom? It's somewhat different than the Pro and Deluxe.
What kind of settings do you set under Skew Driving Voltage and others under that section heading? Or the four lines under DRAM Voltage?
That splash screen, I think you can change something under Boot EFI BIOS to not do that. On Option ROM Message, if you change it from Force BIOS to Keep Current, you may be able to get rid of it.
Last edited by jcniest5; 03-20-2011 at 06:03 AM.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
Something that may shed some lights to you OCing experts out there is this: On when the PC is about to freeze after the logo, my HD LED becomes solid. You know, normally the HD LED only comes on when there is HD activity. But this freeze gives my HD LED a solid ON and it will remain like that until I reset the PC. If that tells anything.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
Uhm I really need better mems, I'm on the hunt for a nice CL7 4Gb kit
I have the same ones, no problems at all
2600k @ Asus M4E - Little Devil Case
Intel I7 965xe @ Evga E762 - Little Devil SS Case
2x Intel I7 E5620 @ Evga SR-2 - MountainMods ext Ascension watercooled
Intel I7 930 @ Evga E759 - LianLi V2000 air cooled
Do you mind sharing your BIOS settings? There are lots of DRAM settings that I left at Auto. Could this cause the Prime95 stoppage issue I have?I have the same ones, no problems at all
On to another topic. I know it's not a good idea to run your rig 24/7 with high vcore, but at what voltage that will actually kill a CPU right on the spot? 1.6v, 1.7v, 1.8v?
Last edited by jcniest5; 03-20-2011 at 06:54 AM.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
Try this.
... change the CPU Vcore phase control to 'standard' and the offset option would be available again
'He is no fool who gives what he cannot keep to gain what he cannot lose' - Jim Elliot
Click on the pic to download a free pdf sample of the bestselling book!
@MacClipper: Got it! Thanks....
Edit: Didn't even realize the M4E doesn't have any firewire ports! Wow...amazing.
Last edited by jcniest5; 03-20-2011 at 03:16 PM.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
I only changed the vdimm to 1,65 and set the timings like shown on the sticks so far ^^.
Didn't have that much time to test lower timings/higher frequencies
Last edited by sargatanas; 03-21-2011 at 01:50 AM.
2600k @ Asus M4E - Little Devil Case
Intel I7 965xe @ Evga E762 - Little Devil SS Case
2x Intel I7 E5620 @ Evga SR-2 - MountainMods ext Ascension watercooled
Intel I7 930 @ Evga E759 - LianLi V2000 air cooled
Posting Permissions
Reply With Quote
Bookmarks