Liquid Cooling Case Gallery

[xFEARx3]

[jedihobbit]

Blue and white works well with the Gig mobo!!

[felix_w]

What coolant is that ?

[xFEARx3]

Feser UV Blue with Tygon.

[lowfat]

Feser UV Blue with Tygon.

Have you had any issues w/ the tubing clouding? I also decided to try out Feser coolant this time around after seeing someone have great luck w/ their tubing not clouding when using it. I don't have high hopes though.

[deachus]

Moving my R3E to my secondary rig and putting together the following as my new main rig for video encoding, gaming and work

i7 2600K
Maximus IV Extreme
G.Skill RipJaws 2x2GB DDR3-2133 CL8
MSI N560GTX Ti Twin FrozrII/OC
Corsair AX1200
2x 64GB Sandforce SSD RAID 0
WD Cavier Black 2TB
Samsung BluRay Burner
Corsair 800D
Apogee XT w/BP Compresssion matte black
BP fully modded D5 matte black pump
LRT white tubing
all matte black BP compression fittings
EK coolstream 320 rad



Just waiting for the Maximus IV Extreme and 800D to arrive, all other parts I already have waiting. Everything should be here by mid next week then I will post pics once I have it all together. Would have been done a while ago but it's taken some time to hunt down a new B3 revision Maximus IV Extreme. Was able to snag one from Amazon yesterday before they sold out again.

[NicePants42]

nice rig

Very nice rig. Unfortunately it draws the eye to your crappy SSD mount with no cable sleeving

[arkadur]

@xFEARx3 - very nice rig dude! but UD9 with single GPU?

[Byakuya]

Small update of the water.

[jedihobbit]

This is a large external radiator case designed to sit on top of a 800D case:

Gifted understatement!!

[Aaronharmon]

This is a large external radiator case designed to hold two 120x3 radiators and sit on top of a 800D case:

Oh god! That is beautiful. Please tell me there is a build log or pics. How did you do it? Is that a scratch build?

[xFEARx3]

Very nice rig. Unfortunately it draws the eye to your crappy SSD mount with no cable sleeving

i know.. it will be replaced.

@xFEARx3 - very nice rig dude! but UD9 with single GPU?

atm yes, but i dont know if i go for 2way sli or 3way sli.

[NaeKuh]

Thanks. Yes, this was a 100% scratch build. Build log here.

omg that is beautiful.

spots however u should leave a little bit of room for a psu.

Then you can take the green wire and black wire on the psu, put it on a switch, and have the unit be self powered.

Then that unit would just be epic.

[Ogge_swe]

Replaced my GTX295 cards with GTX580

still wating for second and third GTX580 with blocks

that white tube is not supposed to be there :P it´s just temporary untill i get my other cards and blocks

[SnW]

http://www.sweclockers.com/image/gallery/2011/03/18/System.jpg?t=original&k=a452d4ee

Replaced my GTX295 cards with GTX580

still wating for second and third GTX580 with blocks

that white tube is not supposed to be there :P it´s just temporary untill i get my other cards and blocks

Thta rig looks so great i had to quote it

[arkadur]

@Ogge_swe - nice rig, i was wondring what that white tube doing there,

keep us updated.

[hazardous]

@Ogge Swe very clean! I did a doubletake when I saw the white tube though. Well done.

[LittleDevil]

Really nice builds guys.

[Ogge_swe]

Thta rig looks so great i had to quote it

thanks

@Ogge_swe - nice rig, i was wondring what that white tube doing there,


keep us updated.

when i thorn out my Wc´ed 295 cards i didnt have enoug red tube left to close the loop again :P i only had a bit of white :P

@Ogge Swe very clean! I did a doubletake when I saw the white tube though. Well done.

ran out of Red. just temporary tube

[Shadowsong-]

Hardware

Corsair Obsidian 800D (custom side panel)
Asus Rampage II Extreme
I7-920 @ 4.2Ghz
12GB DDR3 G.Skill Ram
2x XFX 5970 Black Edition's in Crossfire
120GB OCZ Revo Drive

Watercooling

DDC 18w Pump
EK CPU & GPU Blocks
250 Res
1x 240 Radiator (bottom right)
1x 360 Radiator (top)

Few more things to do but its nearly finished.

[McBacker]

Beautiful! Amazing job.

[Hugo381]

Final revision till I go SLI GTX 580 down the road. New BluRay Disk Burner, Single Braided Cords for MoBo/Video Card, changed radiator and rear intake fans to AeroCool Shark Devil Red Edition Fans, added some LED's to GPU Block and Cathode Tube behind reservoir, and Dyed the water with PrimoChill DyeBomb Blood Red (Not Impressed).

[eskamobob1]

how did u manage to get twists like that without having to use anti-kink coils? and nice build (i like that it doubles as a liquor cabinet )

[m0r7if3r]

oh man, that's really pretty and elegant hugo

[jedihobbit]

@ hugo forgot what the ballistic series of mem could add to a build!! Nice job and great bottle collection.