MaximusIV-Extreme Thread

**PolRoger** · 03-18-2011, 08:30 PM

Originally Posted by jcniest5

Where did you get EFI BIOS 1298? I couldn't find it. Can you send it to me? Thanks...

You can find it here... click (new link).

http://www.xtremesystems.org/forums/...&postcount=128

**owikh84** · 03-18-2011, 08:36 PM

Originally Posted by jcniest5

Where did you get EFI BIOS 1298? I couldn't find it. Can you send it to me?

I just found out that Corsair Dominator 2000C9 8GB memory (4GBx2) is not compatible with M4E. I kept having stoppage in Prime95 even at stock and I switched to Vengeance 8GB (4GBx2) and it's running fine now.

here u go:
http://91.121.148.119/downloads/BIOS...-ASUS-1298.ROM
sorry no changelog

**jcniest5** · 03-18-2011, 09:03 PM

Originally Posted by owikh84

here u go:
http://91.121.148.119/downloads/BIOS...-ASUS-1298.ROM
sorry no changelog

Thanks a lot! Hey, before I flash mine, does it OC any better than 1101, same, or worse? Any known issues fixed by this version?

**splmann** · 03-18-2011, 11:25 PM

After flashing 1298 i got the Postcode F1 ?

**jcniest5** · 03-18-2011, 11:33 PM

F1 says: Recovery condition triggered by user.

**splmann** · 03-18-2011, 11:48 PM

Originally Posted by jcniest5

F1 says: Recovery condition triggered by user.

thank's !

But what i have to do ?

**l0ud_sil3nc3** · 03-19-2011, 01:09 AM

Originally Posted by Falkentyne

Sigh....1.544 for 5 ghz...can you lower the voltage? That's extremely high...
What CPU cooler are you using?

you can't be scared when you have a

ty batch

I have a 2500k that needs 1.46 for 4.8 for complete stability, it is epic fail on many levels

**l0ud_sil3nc3** · 03-19-2011, 01:10 AM

Originally Posted by Splave

tried those volts for giggles and over volting the vtt was more unstable then 1.15v set.

I too have noticed increased instability when vccio is higher than 1.1 on most of my cpu's so you are definitely not the only one

**bro20000** · 03-19-2011, 01:38 AM

Bios ere http://91.121.148.119/downloads/BIOS/?C=M;O=D

**Splave** · 03-19-2011, 07:26 AM

whats the deal with how long this board takes to boot XP! It scrolls like 5 times before it loads ftl

**quake6** · 03-19-2011, 08:03 AM

I don't have any problems with XP, it boots very fast

**jcniest5** · 03-19-2011, 09:33 AM

Originally Posted by splmann

thank's !

But what i have to do ?

It was probably a failed flash and BIOS was recovered. What program did you to use to flash? I use EZ Flash (98% of the time ) within the BIOS to do all my flash jobs...

Does anyone know why there isn't an Offset option for vcore on the M4E? It's set to Manual but it's also grayed out so I can't pick it. Maybe there is a back-door way, but I don't really know.

**jcniest5** · 03-19-2011, 11:11 PM

Can someone help me getting past the freeze at Windows 7 startup? It freezes at the time Window logo (four-color logo coming together). It only does this when I choose 51x or higher. Also, can someone give a rundown of the settings in the EFI BIOS so I can duplicate? Sorry to sound so newbie. Thanks....

**Falkentyne** · 03-19-2011, 11:22 PM

Originally Posted by Splave

whats the deal with how long this board takes to boot XP! It scrolls like 5 times before it loads ftl

LMAO....happens on my board too.
It's probably initializing something.

That also happened on my P5WDH.

It's not reading from the HDD during that time, right?

**owikh84** · 03-20-2011, 12:34 AM

Originally Posted by jcniest5

Can someone help me getting past the freeze at Windows 7 startup? It freezes at the time Window logo (four-color logo coming together). It only does this when I choose 51x or higher. Also, can someone give a rundown of the settings in the EFI BIOS so I can duplicate? Sorry to sound so newbie. Thanks....

Try enabling CPU PLL Overvoltage

**l0ud_sil3nc3** · 03-20-2011, 01:04 AM

Originally Posted by Splave

whats the deal with how long this board takes to boot XP! It scrolls like 5 times before it loads ftl

I just got XP running on it and I noticed the same thing too, the rog splash screen appears and then reappears three times before it boots XP.

**l0ud_sil3nc3** · 03-20-2011, 02:36 AM

so my efficiency blows hard on 32m, I am pretty sure it is the secondary timings.

cas 7

vs

cas 8

**jcniest5** · 03-20-2011, 05:53 AM

Originally Posted by owikh84

Try enabling CPU PLL Overvoltage

That has always been Enabled when I do any OCing. Still no luck. Anything else I may have missed?

Under Digi + VRM (click on it, another screen pops up), what kind of setting to use for that whole screen top to bottom? It's somewhat different than the Pro and Deluxe.

What kind of settings do you set under Skew Driving Voltage and others under that section heading? Or the four lines under DRAM Voltage?

Originally Posted by l0ud_sil3nc3

I just got XP running on it and I noticed the same thing too, the rog splash screen appears and then reappears three times before it boots XP.

That splash screen, I think you can change something under Boot EFI BIOS to not do that. On Option ROM Message, if you change it from Force BIOS to Keep Current, you may be able to get rid of it.

**jcniest5** · 03-20-2011, 06:19 AM

Something that may shed some lights to you OCing experts out there is this: On when the PC is about to freeze after the logo, my HD LED becomes solid. You know, normally the HD LED only comes on when there is HD activity. But this freeze gives my HD LED a solid ON and it will remain like that until I reset the PC. If that tells anything.

**st0ned** · 03-20-2011, 06:21 AM

Uhm I really need better mems, I'm on the hunt for a nice CL7 4Gb kit

**sargatanas** · 03-20-2011, 06:34 AM

Originally Posted by jcniest5

I just found out that Corsair Dominator 2000C9 8GB memory (4GBx2) is not compatible with M4E

I have the same ones, no problems at all

**jcniest5** · 03-20-2011, 06:51 AM

Originally Posted by sargatanas

I have the same ones, no problems at all

Do you mind sharing your BIOS settings? There are lots of DRAM settings that I left at Auto. Could this cause the Prime95 stoppage issue I have?

On to another topic. I know it's not a good idea to run your rig 24/7 with high vcore, but at what voltage that will actually kill a CPU right on the spot? 1.6v, 1.7v, 1.8v?

**MacClipper** · 03-20-2011, 07:08 AM

Originally Posted by jcniest5

Does anyone know why there isn't an Offset option for vcore on the M4E? It's set to Manual but it's also grayed out so I can't pick it. Maybe there is a back-door way, but I don't really know.

Try this.

... change the CPU Vcore phase control to 'standard' and the offset option would be available again

**jcniest5** · 03-20-2011, 11:13 AM

@MacClipper: Got it! Thanks....

Edit: Didn't even realize the M4E doesn't have any firewire ports! Wow...amazing.

**sargatanas** · 03-21-2011, 01:08 AM

Originally Posted by jcniest5

Do you mind sharing your BIOS settings?

I only changed the vdimm to 1,65 and set the timings like shown on the sticks so far ^^.
Didn't have that much time to test lower timings/higher frequencies

Thread: MaximusIV-Extreme Thread

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions