-
Well my new B3 Asus P8P67 Deluxe arrived a few days ago and for sure does not Overclock the same as the old.
I Just passed a 5 hour run with prime , also a 3 pass with Memtest. Bios 1305.
** Everything else on Auto **
AI Overclock Tuner - Manual
BCLK/ Frequency - 103.0
All Cores - 44
PLL - Disable
Memory - 1922MHz @ 9-10-9-27-2t
EPU Power Saving - Disable
Load-Line - Medium
Phase Control - Optimized
Dutry Control - T.Probe
CPU Current Capability - 100%
VRM Freq - 350
CPU Voltage - Offset + 0.040
DRAM 1.65
CPU PLL Voltage - Auto
CPU Spread Spectrum - Disabled
C1 C3 C6 - Enable
2 f3"s 1 tb in raid 0 on the Intel ports.
Intel Core i7 2600k
CORSAIR DOMINATOR GT 8GB (2x 4GB) 2000 (CMT8GX3M2A2000C9)
*** Note ***
Please post your B3 Overclock settings as I tried for hours and hours to keep prime from BSOD or any suggestions on the above are more than welcome. 25c Idle - 54c Load on a custom water cooled set up.
Last edited by getyasome; 03-14-2011 at 01:50 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks