Really need help on this:
I have 2 drives on the Asus EZBackup (SIL4723) in Raid0 configuration, and other 3 drives on Intel ICH7 configured as non-raid. Because I don't want to mess up with the Raid, I unplugged the 2 drives from EZBackup (SIL4723) ports and I was trying to install the OS on a SSD drive conected to first port of ICH7. I succeded only after I modified the ICH7 controller to AHCI mode. After that, I was reconnect the 2 drives of Raid0, and boooooooooooom....the raid was gone. I must mention that I did not touch the SIL4723 jumpers. The only thing with I mess up was the setting for ICH7 in bios. Could that blow away my Raid0?The real problem is that the RAID0 I have a lot of material that is critical to recover it somehow.