Is it necessary to have that screw in there at all?
Is it necessary to have that screw in there at all?
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
Well the entire board has 15, so probably not, but I'd rather spend the time to get it fitting nicely. I like paying attention to unnecessary detail.
Your other option is to set the rod around the VGA connector. ("set" as in bend. In this case you would put in a "double set" to go out, around and then back in)
[SIGPIC][/SIGPIC]
Looking good, Jacka!
Bought the thread in three lengths of 1m (cut each into 5x0.2m). One of the ends of a piece of was quite badly bent, but I managed to get it pretty straight. Will have a check later to see if it has any kinks in the right place.
lol so true.Originally Posted by Jacka
Well the entire board has 15, so probably not, but I'd rather spend the time to get it fitting nicely. I like paying attention to unnecessary detail.i prefer Xtreme detail though
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
love it!
http://i.imgur.com/RXYjsl.jpg
holy smokes.. thats mental.. its like watching a skyscraper from the street ( like home alone kid did :P ).
congratz and those shots are terrific. Thanks for your time and effort
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
dude you're wasting valuable crunching time! get those beasts fired up already
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
rofldude you're wasting valuable crunching time! get those beasts fired up already
once you cant pay your electric bills any more ( that must be holding you back from firing up :P ) you can send em down to sh.. land were we have the worlds second cheapest electric
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
It will be interesting to see how you cable everything up
Hey Jacka, you ever get your systems up and running?
June
why june?
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
Oh ok cool. Remember the little by little rule. One thing here and there and it'll add up to complete. Keep on crunching on it!
Jacka,
What is it you need to get these machines running??
Good call Origin! Jacka, let's get these systems up!
Subscribed
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Long time,no see.Yet i have just won an arima quad board ,HP oem green pcb.In the next weeks i will be testing its bios and its rumored capability booting in windows environment,yet i have to admit,i prefer ubuntu distro over any win out there.This arima board was a quest to remember fellas.
Windows capable? Ohh... nice.
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
I'm anxiously awaiting to hear that!
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
Side note, both of my Arimas are offline. If anyone is interested in them, PM me.
Mine has been offline for about a month and a half because of power and trying to keep my budget a little tighter.
HOWEVER I just got a raise
Heat permitting of course, I may have to turn it off during the 90+ degree days just to keep temperatures reasonable
*edit* of course, the coming week is bringing 80s and 90s again. Heh. OK so I might have to wait on turning it back on.
Last edited by Sparky; 06-26-2011 at 02:12 PM.
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
I have a got a Case for Arima F3000 Mainboards.
It's a Case from Codegen S201-R.
It's a Cube Case.
On the left side is the Mainboard and on the rigth side you can built in the Power-Supply and the Hard-Disk Case.
There is enough space for the whole Mainboard with Hetpipe Heatsink from Artic Cooling Freezer Pro or Skythe Katana 2 or 3
For building in the MB you must mod the Case a little bit...
For more Information you can look here:
https://www.hardwarecrash.de/index.php/projekte/hardware/292-server-gehaeuse-arima-f3000-teil-1
and here:
http://www.hardwarecrash.de/index.ph...a-f3000-teil-2
#1 Supermicro H8QG6-F
3x AMD 8238 (36Cores)
42GB RAM - HDD Raid5 15,33 TB
#2 Supermicro H8SGL-F
AMD Opteron (8Core) 6212
16 GB RAM
Looking good, o-brian!
Finally, I've finished what I was doing the past few months, and have all of August and September free! Expect to see some updates from my systems soon.
Posting Permissions
Reply With Quote
Bookmarks