Results 1 to 25 of 81

Thread: Watercool MO-RA 3, anyone know something about it?

Threaded View

  1. #15
    Xtreme Member
    Join Date
    Jun 2010
    Posts
    276
    I'm about to order a couple of 9x120's of these and see how it works out.

    currently i'm running a 4x120 BlackIce GTX X480 with a single MCP655 pump. it's fine for the most part for temps... infact temps are just perfect for a 980X OC'd to 4.3ghz daily and a HD5970 OC'd to 950 core and 1253 mem. it's also running through a koolance full board block on an ASUS RE3.

    the biggest thing i was shooting for was a quiter running OC'd system. if the MO-RA3 gives the same temps with quiet fan operation, that's all i need .

    granted, i will be keeping my 4x120... it'll come in handy if i end up going... a tad bit extreme.

    EDIT: oh, system water idle temp is roughly 43-44*c during winter temps. summer is around 48-49*c, full load never goes higher than 52*c in any season.
    Last edited by skuldarin; 02-18-2011 at 06:42 PM.
    cranked
    980x - 4.710ghz | mem - 12gb 1884 CL9 | vga - HD5970 | mobo - ASUS R3E
    [188x25 1.55625v, 2x uncore 3768, QPI 6782 1.375v]
    http://www.xtremesystems.org/forums/...postcount=1813
    24/7 settings
    4.0ghz @ 1.34375v
    4.138ghz @ 1.35625v
    4.272ghz @ 1.38125v
    4.4ghz @ 1.41825v
    4.522ghz @ 1.4500v
    BATCH - 3013A540 =

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •