Just trying to dial in some clocks and was wondering if you guys could give me some tips. I'd like to stay between 4.5-4.8 with a max vcore of 1.350 and here's what I've got so far at 4.5. Also, am I ok to disable the JMB controller since I'm not going to use raid? To above poster, the marvell controller has to be enabled if you want your drives to work.
CPU Ratio = 45
BIOS Vcore = Manual 1.335
DramV = 1.525
Dram Speed = 6.8.6.24 1T @ 1600Mhz
4-Load Vcore = 1.32
Idle Vcore = 1.328-1.336 (varies)
Load-Line Calibration = Ultra High
Current Capability = 100%
Frequency = Auto
Phase Control = Manual - Extreme
Duty Control = Extreme
Vccsa = Auto
Vccio = Auto
PLL Voltage = Auto
PCH Voltage = Auto
Reply With Quote
Bookmarks