what about these two runs, no one is even close yet?? cheapseats is on UD7 i think


i have to check with the P8P67 DLX i have here again but last time i did i couldnt see any difference, not sure if they are same or not


can you also try compare auto subs with only main timings set and TRFC and command rate, maybe that ratio sucks on that bios no idea, try 21.33 with higher ram clock so you can compare to some of the runs in this thread iwth uD7


Quote Originally Posted by cheapseats View Post
hi guys, here's a couple of runs for 5ghz and my max run so far @ 53x102.5
i started to get problems in 32m with my OCZ > 1093mhz 7-7-6. up to that is ok
think i'll need to use 54x multi to get any closer to 6mins

estimated for 7-7-6 + subtiming:

53x103.7 5495mhz 1110mhz @ 5m59x
54x102.0 5508mhz 1088mhz @ 5m59x

needed 1.53+ vcore @ 5430mhz, so lowest cpu clock is better

2600k L042B074 + H70
UD5 / bios F6d
XPsp2

all manual subtiming, same for each run


100.0x50 (100.2 bios set)




102.1x49 (102.3 bios set)



[/IMG]